Portable Side Mount with Dual Lock 8 Rod Holder The great side-mount Rod Holder in a portable version. Easy to install using a 3M Dual-lock technology. Simply clean and place the mounting squares where you want and you're done. The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion. Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods. Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations. Holds up to 8 Rods.

Portable Side Mount with Dual Lock 4 Rod Holder The great side-mount Rod Holder in a portable version.  Easy to install using a 3M Dual-lock technology.  Simply clean and place the mounting squares where you want and you're done.  The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion.  Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods.  Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations.  Holds up to 4 Rods.

Portable Side Mount with Dual Lock 6 Rod Holder The great side-mount Rod Holder in a portable version.  Easy to install using a 3M Dual-lock technology.  Simply clean and place the mounting squares where you want and you're done.  The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion.  Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods.  Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations.  Holds up to 6 Rods. 

Tough-Claw Mount w/Self-Leveling Cup Holder The RAM-B-132-400U consists of the small Tough-Claw base and universal self-leveling drink cup holder. The drink cup holder has two pivot points, allowing for your drink to always stay upright and never spill. Cozy is included with purchase of the RAM-B-132-400U. This mount rotates 360 degrees. The RAM-B-132-400U includes the RAM Tough-Claw; the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars and flat surfaces. The compact design allows easy installation in a wide variety of applications including motorcycles, kayaks and boats, bicycles, wheelchairs, medical carts and more. The marriage of tool-less removal and a low-profile makes this must have accessory easy to pack with you wherever you go. Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14" Material: High Strength Composite & Stainless Steel Note: The "U" in the part number reflects product packaged in poly bag.

RAM® Tab-Lock™ Tablet Holder for 10" Tablets with Case + More  The RAM® Tab-Lock™ spring-loaded, quick-release cradle with a keyed lock offers a secure fit with easy access to the mounted tablet. The keyed lock offers theft deterrence and unwanted tampering in public settings. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab 4 10.1 and Tab S 10.5 with an Otterbox Defender case, but also support many other tablet models and industrial tablet PCs. The spring-loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. The included back plate is interchangeable with various-size support cups, making it compatible with numerous tablet models. The detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. A set of four nuts and bolts is included to connect the cradle to any RAM components or mounts that contain the universal AMP hole pattern. The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. The product consists of a holder only. Case not included. Features: Locking mechanism for theft deterrence Support cups contain open slots to accommodate tablets of various sizes The back plate can support various sizes of cups Spring-loaded tension provides secure support and quick release for your tablet Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (2) #8 x 5/8" Sheet Metal Screws, (2) M4 x 32mm Machine Screws, (2) M4 Nylock Nuts, (2) Keys Holder Dimensions: Height Range: 9.64" - 12.32", Width Range: 6.13" - 7.4", Depth Range: .13" - .7" Hole Pattern: 4-Hole AMPS: 1.181" x 1.496" Materials: High-strength composite Packaging Type: Poly Bag Weight: 1.25 lbs

Swivel Base Rod Holders RH570 Stainless Steel Side Mount w/ Swivel Base Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a inch stainless steel lock nut at the bottom of the rod holder.

Swivel Base Rod Holders RH570XL Stainless Steel Side Mount w/ Swivel Base Extra Long This holder is 4" longer than the standard length allowing the bent butt to sit deeper in the holder thus reducing the leverage and stress on the mounting surface. Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.

RAM® X-Grip® Large Phone Mount with RAM® Stubby™ Cup Holder Base Sometimes, it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip® has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. This mount comes with the RAM Stubby™ cup holder mount. The durable composite shell construction and flexible support fins can be trimmed to size make this cup holder base a portable and versatile solution. The RAM ball and socket system allows for articulation at both ends of the double socket arm creating almost infinite adjustment and perfect viewing angles. Compatible with any vehicle cup holder with an inside diameter range of 2.57" to 3.5". The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.  Specifications: Purchase Includes: (QTY. 1) Optional Tether Included Cradle Dimensions: Minimum Width = 1.75" (Minimum Height = 5.5") Maximum Width = 4.5" (Minimum Height = 3.25") Depth = 0.875" Material: High Strength Composite & Stainless Steel Ball Size: B Size 1" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Weight: 1.55 lbs.

RAM® Track Ball™ Double Ball Mount with Garmin Spine Clip Holder  The RAM® Spine Clip holder is a mount adapter that easily clips into the integrated spine connection on a wide variety of Garmin devices. This kit is compatible with virtually any track system including the RAM® Tough-Track™ and is easy to install and remove from your vehicle or vessel. Features: Kit includes RAM® Spine Clip Holder for Garmin, B size diamond ball base, medium double socket arm, and RAM® Track Ball™ base The holder secures any Garmin handheld device with an integrated spine connection Designed for most third-party track mounting systems; compatible with any RAM® Tough-Track™ Backed by a lifetime warranty Compatible Garmin Devices: Alpha® 100, Approach® G3, Approach® G5, Astro® 320, Astro® 430, Astro® 900, Dakota® 10, Dakota® 20, eTrex® 10, eTrex® 20, eTrex® 20x, eTrex® 22x, eTrex® 30, eTrex® 30x, eTrex® 32x, eTrex® Touch 25, eTrex® Touch 35, eTrex® Touch 35t, GPSMAP® 62, GPSMAP® 62s, GPSMAP® 62sc, GPSMAP® 62st, GPSMAP® 62stc, GPSMAP® 64, GPSMAP® 64s, GPSMAP® 64sc, GPSMAP® 65s, GPSMAP® 66i, GPSMAP® 66s, GPSMAP® 66st, GPSMAP® 79s, GPSMAP® 79sc, GPSMAP® 86 Series, inReach Explorer®+, inReach® Mini, inReach SE®, Oregon® 200, Oregon® 300, Oregon® 400c, Oregon® 400i, Oregon® 400t, Oregon® 450, Oregon® 450t, Oregon® 550, Oregon® 550t, Oregon® 600, Oregon® 600t, Oregon® 650, Oregon® 650t, Oregon® 700, Oregon® 750, Oregon® 750t, Rino® 610, Rino® 650, Rino® 650t, Rino® 655t, Rino® 700, Rino® 750, Rino® 755t, and Sport PRO™ Includes: Assembly Hardware (1) Friction Washer (1) 1/4"-20 x 7/8" T-Bolt Specifications: T-Bolt Dimensions (inch): .48" x .95" Socket to Socket Length (inch): 3" Ball Size: B Size (1") Weight: 0.41 lb. Materials: High-strength composite Weight Capacity:  Standard Use: 2 lbs Heavy-Duty Use: 1 lb

Goulds 16Bfk1 - 5 1/8 Kit W/ 5 1/8 Trim  

RAM® Double Ball Mount with Key Lock Knob The RAM-101-DL locking mount consists of the short arm 1.5 inch diameter ball and socket system with universal round base ends. This mount is designed to be a universal mounting solution for both RAM and non-RAM designed products. Each plate includes a hole pattern that matches the standard AMPS four hole pattern and a three hole 120 degree hole pattern. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Long Arm Note: The "U" in the part number reflects product packaged in poly bag. Weight: 2.21 lbs.

290 R-5 Universal Rod Holder w/Mount The R-5 Rod Holder has been designed to securely hold your spincaster, spinning, bait caster, level wind and/or fly rod with up to 15lb test.   The 1/4" Stainless Steel lock bar pivots open to allow a quick effortless release of your rod. Features: Easy adjustable lock bar tension Designed and built to withstand all conditions and backed by the Scotty name In the Box: 290 R-5 rod holder 241 Side deck mount *Sold as an Individual

289 R-5 Universal Rod Holder without Mount The R-5 Rod Holder has been designed to securely hold your spincaster, spinning, bait caster, level wind and/or fly rod with up to 15lb test.   The 1/4" Stainless Steel lock bar pivots open to allow a quick effortless release of your rod. *Mount sold separately Features: Easy adjustable lock bar tension Designed and built to withstand all conditions and backed by the Scotty name In the Box: 290 R-5 Rod Holder *Sold as an Individual

Map Saver The map saver features the 3M dual lock technology to provide a permanent adhesion indoor or out. It also comes with stainless steel mounting screws. The map saver keeps cell phone, wallet, money, keys, glasses, maps, etc. organized and dry in this water resistant utility bag. Can be mounted on aluminum, fiberglass, in storage boxes, virtually anywhere in the boat.  

Bait Caster / Spinning Rod Holder Holds a bait caster reel in a cushioned cradle.A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top. Includes No. 241 combination deck or side mount. WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.