|
Lighted Rocker Switch
This Switch features a lighted rocker with protective rubber boot and is a great addition to any RIGID Industries lighting system. This switch will fit all RIGID Industries wiring harnesses. This product requires a 3/4" hole to mount.
Features:
Lighted for Better Visibility
Water Resistant
Protective Rubber Boot
Works with All RIGID Industries Wiring Harnesses
|
12.74 |
|
|
Lighted Rocker Switch SPST On-Off 4 Blade
Sealed to IP66 for water resistance. (High pressure wash.)
Pilot Light Illumination
58238 - Large lens with incandescent bulbs with brass blade terminals
56327 Small lens with incandescent bulbs with brass screw terminals
58327 Small lens with incandescent bulbs with brass blade terminals
|
23.58 |
|
|
Lighted Rocker Switch SPST On-Off 3 Blade
Sealed to IP66 for water resistance. (high pressure wash.)
Pilot Light Illumination:
58238 - Large lens with incandescent bulbs with brass blade terminals
56327 Small lens with incandescent bulbs with brass screw terminals
58327 Small lens with incandescent bulbs with brass blade terminals
|
18.91 |
|
|
Lighted Rocker Switch SPDT On-Off-On 4 Blade
Sealed to IP66 for water resistance. (high pressure wash.)
Pilot Light Illumination:
58238 - Large lens with incandescent bulbs with brass blade terminals
56327 Small lens with incandescent bulbs with brass screw terminals
58327 Small lens with incandescent bulbs with brass blade terminals
|
27.44 |
|
|
DC 4-Position Lighted Rocker Switch Panel
Switches have a built-in red indicator light and are designed for use in exposed marine applications. Splash proof fuseholders with 10 Amp fuses provide overcurrent protection.
Width: 5-1/4"
Height: 4"
Depth: 3"
Current: DC
|
69.37 |
|
|
DC 3-Position Lighted Rocker Switch Panel
Switches have a built-in red indicator light and are designed for use in exposed marine applications. Splash proof fuseholders with 10 Amp fuses provide overcurrent protection
Width: 5-1/2"
Height: 4-1/8"
Depth: 3"
Current: DC
|
55.50 |
|
|
3-Way Lighted Rocker Panel Switch
Controls any pump equipped with an automatic float switch. This unit features a black plastic panel. It has a built-in fuse holder and an internally lighted rocker switch with 3 positions (automatic, off, or manual) with the Rule "fail-safe" spring return to "off" from the "manual" position.
WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
37.76 |
|
|
DC 1-Position Lighted Rocker Switch Panel
Switches have a built-in red indicator light and are designed for use in exposed marine applications. Splash proof fuseholders with 10 Amp fuses provide overcurrent protection.
Width: 2-1/4"
Height: 4"
Depth: 3"
Current: DC
|
26.44 |
|
|
Light Bar Security Kit for E-Series, SR-Series, Radiance & Radiance+
This Security Nut Kit from RIGID Industries makes a potential thief's job much more difficult. It includes two (2) 2.25 x 20 spanner nuts, four (4) spacer washers, and one (1) 1/4" hex nut bit. This kit is designed to work with cradle and weld-on mounts.
Security Kit Fits: E-Series, SR-Series, Radiance & Radiance+
Features:
Protection Against Theft
Works with Most Cradle & Weld-on Mounts
Two (2) 2.25 x 20 spanner nuts
Four (4) spacer washers
One (1) 1/4" hex nut bit
One (1) kit required per each Light
Legal Disclaimer - RIGID Industries hereby renounces any and all warranties, guarantees, obligations, liabilities, express or implied, arising by law or otherwise, with respect to this security kit, and specifically disclaims any implied warranty of fitness for any purpose.
|
25.20 |
|
|
Light Bar Security Kit for D-Series Lights, D-SS & Radiance POD
Stainless steel security hardware kit for the RIGID Dually and D2 LED light families. Includes security nuts/bolts and necessary security keys for installation. Must be used along with standard hardware supplied with your light.
Features:
Stainless Steel Hardware
Includes: Security Nuts/Bolts & Key
One (1) kit required per Light
Disclaimer - RIGID Industries hereby renounces any and all warranties, guarantees, obligations, liabilities, express or implied, arising by law or otherwise, with respect to this security kit, and specifically disclaims any implied warranty of fitness for any purpose.
|
38.24 |
|
|
Light Bar Security Kit for SR-M Series & SR-Q Series Lights
Stainless steel security hardware kit for the RIGID SR-M, SR-M2, SR-Q & SR-Q2 LED light families. Includes security nuts/bolts and necessary security keys for installation. Must be used along with standard hardware supplied with your light.
Features:
Stainless Steel Hardware
Includes: Security Nubs/Bolts and Security Key
One (1) kit required per each Light
Disclaimer - RIGID Industries hereby renounces any and all warranties, guarantees, obligations, liabilities, express or implied, arising by law or otherwise, with respect to this security kit, and specifically disclaims any implied warranty of fitness for any purpose.
|
31.49 |
|
|
Light Bar Security Kit for Flush Mount Lights
Stainless steel security hardware kit for any of the RIGID Flush-mount LED Lights. Includes security nuts/bolts and necessary security keys for installation. Must be used along with standard hardware supplied with your light.
Features:
Stainless Steel Construction Hardware
Includes: Security Bolts and Security Keys
One (1) kit required for a pair of lights.
Disclaimer - RIGID Industries hereby renounces any and all warranties, guarantees, obligations, liabilities, express or implied, arising by law or otherwise, with respect to this security kit, and specifically disclaims any implied warranty of fitness for any purpose.
|
11.64 |
|
|
E-Series 20" Cradle Mount - Black
This cradle mount is specifically designed to be used with our E-Series LED light bars. It is made right here in the USA out of high quality stainless steel and powder-coated satin black to match RIGID Industries lighting components.
Features:
Stainless Steel Construction
Black Powder Coat Finish
Includes All Necessary Hardware
Made in the USA!
|
52.50 |
|
|
E-Series 10" Cradle Mount - Black
This cradle mount is specifically designed to be used with our E-Series LED light bars. It is made right here in the USA out of high quality stainless steel and powder-coated satin black to match RIGID Industries lighting components.
Features:
Stainless Steel Construction
Black Powder Coat Finish
Includes All Necessary Hardware
Made in the USA!
|
24.00 |
|
|
E-Series 6" Cradle Mount - Black
This cradle mount is specifically designed to be used with our E-Series LED light bars. It is made right here in the USA out of high quality stainless steel and powder-coated satin black to match RIGID Industries lighting components.
Features:
Stainless Steel Construction
Black Powder Coat Finish
Includes All Necessary Hardware
Made in the USA!
|
24.00 |
|