30 Degree Fixed Standard Rod Holder This Rupp standard rod holder is made of 316L stainless steel and is the perfect combination of form and function. This rod holder has an exclusive forged end cap that gives unbreakable rod support while providing a finished look polished to a mirror-like finish. Features: Forged end cap that gives an unbreakable rod support Specifications: Angle: 30-degrees Material: Stainless steel Liner: White

0 Degree Fixed Standard Rod Holder This Rupp standard rod holder is made of 316L stainless steel and is the perfect combination of form and function. This rod holder has an exclusive forged end cap that gives unbreakable rod support while providing a finished look polished to a mirror-like finish. Features: Forged end cap that gives an unbreakable rod support Specifications: Angle: 0-degrees Material: Stainless steel Liner: White

15 Degree Fixed Standard Rod Holder This Rupp standard rod holder is made of 316L stainless steel and is the perfect combination of form and function. This rod holder has an exclusive forged end cap that gives unbreakable rod support while providing a finished look polished to a mirror-like finish. Features: Forged end cap that gives an unbreakable rod support Specifications: Angle: 15-degrees Material: Stainless steel Liner: White

30 Degree Large Fixed HD Rod Holder This Rupp heavy-duty rod holder is made of 316L stainless steel and is the perfect combination of form and function, with an exclusive forged end cap that gives unbreakable rod support while providing a finished look and mirror-like finish. Large 4" flange and extra deep for heavy-duty use! Features: Forged end cap that gives an unbreakable rod support Large 4 in. flange Specifications: Angle: 30-degrees Material: Stainless steel Liner: White

0 Degree Large Fixed HD Rod Holder This Rupp heavy-duty rod holder is made of 316L stainless steel and is the perfect combination of form and function, with an exclusive forged end cap that gives unbreakable rod support while providing a finished look and mirror-like finish. Large 4" flange and extra deep for heavy-duty use! Features: Forged end cap that gives an unbreakable rod support Large 4 in. flange Specifications: Angle: 0-degrees Material: Stainless steel Liner: White

15 Degree Large Fixed HD Rod Holder This Rupp heavy-duty rod holder is made of 316L stainless steel and is the perfect combination of form and function, with an exclusive forged end cap that gives unbreakable rod support while providing a finished look and mirror-like finish. Large 4" flange and extra deep for heavy-duty use! Features: Forged end cap that gives an unbreakable rod support Large 4 in. flange Specifications: Angle: 15-degrees Material: Stainless steel Liner: White

30 Degree Standard Swivel Rod Holder This Rupp standard-size rod holder is made of 316L stainless steel. Durable forged components give heavy-duty performance and are polished to a jewelry-like finish for the finest cockpits. Rupp swivel rod holders are the combination of a top-quality rod holder with a special compression-bearing socket that allows rods to swivel a full 360°, keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides. Features: A precision-engineered compression bearing socket gives it a performance edge Fully adjustable with Delrin bearing surfaces to provide precise control of the swivel action Specifications: Angle: 30-degrees  Material: Stainless steel Liner: White

ShadeFin with White Fabric, Case & Fixed Rod Holder Mount Kit Add an extra layer of sun protection with ShadeFin by TACO Marine that easily attaches into rod holders, tops and arches for convenient, portable shade for almost any boat. ShadeFin’s ocean-inspired design provides expanded shade coverage for multiple areas of the boat, including fore, aft and sides of tops or anywhere there is a rod holder. ShadeFin’s fabric provides an excellent UPF 50+ rating of sun protection while boating and fishing, or when relaxing at the dock and sand bar. To anticipate the needs of many boaters, ShadeFin is available with either a fixed or adjustable rod holder mount, which inserts into any standard rod holder, or with a clamp-on mount for pipe or tube.  ShadeFin’s body houses the ribs and material, and is offered in all black or white. A protective mesh storage sleeve comes standard with the ShadeFin. To operate ShadeFin, remove the sleeve, mount to a desired location onboard and activate the underside release tabs. Structural ribs attached to weather-resistant sun-protecting fabric expand out from the body to lock the fin in place. ShadeFin is lightweight, portable and requires no drilling. Features: Light, compact and portable Easily mounts into any standard rod holder Kit comes with a Fixed Rod Holder Mount Adjustable Rod Holder Mount options available Clamp-on mounting options available for 3/4”, 1” schedule-40 Pipe and 1-1/4” O.D. tube Large coverage area of 5’ X 6’ UPF (Ultraviolet Protection Factor) rating of 50+ (“Excellent” rating) Made of high-quality anodized aluminum parts

ShadeFin with Black Fabric, Case & Fixed Rod Holder Mount Kit Add an extra layer of sun protection with ShadeFin by TACO Marine that easily attaches into rod holders, tops and arches for convenient, portable shade for almost any boat. ShadeFin’s ocean-inspired design provides expanded shade coverage for multiple areas of the boat, including fore, aft and sides of tops or anywhere there is a rod holder. ShadeFin’s fabric provides an excellent UPF 50+ rating of sun protection while boating and fishing, or when relaxing at the dock and sand bar. To anticipate the needs of many boaters, ShadeFin is available with either a fixed or adjustable rod holder mount, which inserts into any standard rod holder, or with a clamp-on mount for pipe or tube.  ShadeFin’s body houses the ribs and material, and is offered in all black or white. A protective mesh storage sleeve comes standard with the ShadeFin. To operate ShadeFin, remove the sleeve, mount to a desired location onboard and activate the underside release tabs. Structural ribs attached to weather-resistant sun-protecting fabric expand out from the body to lock the fin in place. ShadeFin is lightweight, portable and requires no drilling. Features: Light, compact and portable Easily mounts into any standard rod holder Kit comes with a Fixed Rod Holder Mount Adjustable Rod Holder Mount options available Clamp-on mounting options available for 3/4”, 1” schedule-40 Pipe and 1-1/4” O.D. tube Large coverage area of 5’ X 6’ UPF (Ultraviolet Protection Factor) rating of 50+ (“Excellent” rating) Made of high-quality anodized aluminum parts

30 Degree Large HD Swivel Rod Holder This Rupp large rod holder is made of 316L stainless steel. Durable forged components give heavy-duty performance and are polished to a jewelry-like finish for the finest cockpits. Rupp swivel rod holders are the combination of a top-quality rod holder with a special compression-bearing socket that allows rods to swivel a full 360°, keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides. Features: A precision-engineered compression bearing socket gives it a performance edge Fully adjustable with Delrin bearing surfaces to provide precise control of the swivel action Specifications: Angle: 30-degrees Material: Stainless steel Liner: White Size: large

Rod Holder - Medium - 0° - Stainless Steel The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.

Rod Holder - Heavy Duty - 0° - Stainless Steel The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.

ShadeFin Fixed Rod Holder Mount Enjoy your ShadeFin in any standard rod holder with our Fixed Rod Holder Mount. Simply install by inserting the Fixed Rod Holder Mount into a firmly welded rod holder. Sliding the gimbal-slot butt end over the rod holder’s gimbal pin with the open end out makes a secure, quick connection. A beveled, nylon sleeve is included, in the instance the rod holder opening is oversized for the mount’s shaft. Verify that the gimbal slot on the mount is mated with the pin in the rod holder or Telescopic Rod Holder Mount, attach the ShadeFin and enjoy! Features: Manufactured from high-polished Type-304 stainless steel Gimbal-slot butt end for secure rod holder placement Features white nylon sleeve for additional rod holder stabilization Includes self-aligning notch and pin-locking hole 1-year limited warranty

ShadeFin™ Telescopic Rod Holder Mount Wherever you are onboard, ShadeFin can follow! The Telescopic Rod Holder Accessory for ShadeFin – a versatile attachment option that inserts into standard gunnel rod holders for portable, adjustable boat shade. Made from high-quality, lightweight anodized aluminum, the Telescopic Rod Holder Accessory extends from 42" to 67" tall – elevating ShadeFin over the deck for boaters to comfortably stand underneath. For boaters at the dock, sandbar, or in the water, the Telescopic Rod Holder Accessory can also be adjusted to position ShadeFin over the side of the boat – keeping you protected from the sun. Easily Adjustable As the sun changes position, the angle and height of this accessory can easily be adjusted at two points along its body – the bottom joint and the throw latch. Toward the base, the bottom joint features a Sure-Grip Knob and Pull Pin Lock that enables the adjustment of the accessory's upward angle. The throw latch half-way up the body is used to adjust the height and 360° rotation of the ShadeFin. If using this accessory with the Adjustable Rod Holder Mount, the angle of ShadeFin can also be adjusted from the Sure-Grip Knob at the top.  Operation To use the Telescopic Rod Holder Accessory, simply insert the solid gimbal butt into any standard rod holder on the gunnel, remove the Pull-Pin, adjust the upward angle using the Sure-Grip Knob at the bottom joint to the desired 0°, 15°, or 30°, and reinstall the Pull Pin. Then, at the top, simply insert the Fixed or Adjustable Rod Holder Mount into the opening. The mount will secure in place when its gimbal butt seats into the Accessory gimbal pin. Then attach ShadeFin into the Mount, as directed in the Instruction Manual, and deploy. Use the throw latch to adjust the ShadeFin height and horizontal rotation. Features: Features Sure-Grip Knob at the joint with a secure Pull Pin Lock Features a throw latch for secure height adjustment from 42" to 67" Features solid aluminum gimbal butt and internal Delrin bearings High-quality drawn aluminum tube Pairs with T10-3000-5 or T10-3000-6 at the top sold separately 1-year limited warranty

Large Stainless Steel Bolt-less Swivel Rod Holder - 0° 2020 IBEX Innovation Award Winner.  This patent-pending SWIVEL rod holder is a game changer!   Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required.  This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole.  This is the last rod holder you will need on your boat...ever! Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.  These larger diameter rod holders are available at 0° 15° & 30° angles.  To be used with the Large Stainless Steel Backing Plates 10-1476-40 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.