|
Pulsafeeder LB64SA-PHC1-XXX Pump 30 Gpd A Plus
Max Flow: 1.25 gph (30 gpd)
Max Pressure: 100 psi (7 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: GFPPL (Glass Filled Polypropylene)
Seats / O-Rings: CSPE (Hypalon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB64SA-PHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
674.06 |
|
|
Pulsafeeder LB02SA-PHC1-XXX 6 Gpd 150 Psi 115V Pump
Max Flow: 0.25 gph (6 gpd)
Max Pressure: 150 psi (10 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: GFPPL (Glass Filled Polypropylene)
Seats / O-Rings: CSPE (Hypalon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB02SA-PHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
674.06 |
|
|
Pulsafeeder LB64SA-VHC1-XXX Metering Pump 30Gpd Hypalon
Max Flow: 1.25 gph (30 gpd)
Max Pressure: 100 psi (7 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVC (Polyvinyl Chloride)
Seats / O-Rings: CSPE (Hypalon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB64SA-VHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
674.06 |
|
|
Pulsafeeder LC04SA-PHC1-XXX Metering Pump 24Gpd 115V
|
537.19 |
|
|
Pulsafeeder LPH6SA-VTC3-XXX E Plus Pump 120 Gpd
Max Flow: 5.00 gph (120 gpd)
Max Pressure: 100 psi (7 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVC (Polyvinyl Chloride)
Seats / O-Rings: TFE (Teflon)
Balls: Ceramic
Tubing: 1/2" OD
Control: Manual On/Off
The Pulsafeeder Pulsatron LPH6SA-VTC3-XXX Series E Plus Metering pump has a large range of flow and pressure capabilities, make it one of the most versatile series of metering pumps that Pulsafeeder offers. The Series E Plus has flow capabilities ranging from 3 GPD (Gallons per Day) to 600 GPD. The GPD combined with the pressure range of 30 to 300 PSI makes the Series E Plus an excellent choice for your metering application. Having such a wide range of flow and pressure capabilities, you can choose from 20 different pump models in the Series to fit your exact specifications.
Features:
- Manual On/Off Control, Automatic control or 4-20mADC Direct w/ stop function depending on the model.
- Manual control of stroke rate and length via control knobs on the front of the pump.
- Fuse mounted on the panel for extra protection.
- Designed out of water resistant material (perfect for indoor & outdoor placement).
|
1555.20 |
|
|
Pulsafeeder LPH4SA-PTC1-XXX E Plus Pump 40 Gpd
Max Flow: 1.70 gph (41 gpd)
Max Pressure: 250 psi (17 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: GFPPL (Glass Filled Polypropylene)
Seats / O-Rings: TFE (Teflon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
The Pulsafeeder Pulsatron LPH4SA-PTC1-XXX Series E Plus Metering pump has a large range of flow and pressure capabilities, make it one of the most versatile series of metering pumps that Pulsafeeder offers. The Series E Plus has flow capabilities ranging from 3 GPD (Gallons per Day) to 600 GPD. The GPD combined with the pressure range of 30 to 300 PSI makes the Series E Plus an excellent choice for your metering application. Having such a wide range of flow and pressure capabilities, you can choose from 20 different pump models in the Series to fit your exact specifications.
Features:
- Manual On/Off Control, Automatic control or 4-20mADC Direct w/ stop function depending on the model.
- Manual control of stroke rate and length via control knobs on the front of the pump.
- Fuse mounted on the panel for extra protection.
- Designed out of water resistant material (perfect for indoor & outdoor placement).
|
1929.60 |
|
|
Pulsafeeder LPE4SA-PTT1-XXX Metering Pump
Max Flow: 1.85 gph (44 gpd)
Max Pressure: 100 psi (7 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: GFPPL (Glass Filled Polypropylene)
Seats / O-Rings: TFE (Teflon)
Balls: TFE (Teflon)
Tubing: 3/8" OD
Control: Manual On/Off
The Pulsafeeder Pulsatron LPE4SA-PTT1-XXX Series E Plus Metering pump has a large range of flow and pressure capabilities, make it one of the most versatile series of metering pumps that Pulsafeeder offers. The Series E Plus has flow capabilities ranging from 3 GPD (Gallons per Day) to 600 GPD. The GPD combined with the pressure range of 30 to 300 PSI makes the Series E Plus an excellent choice for your metering application. Having such a wide range of flow and pressure capabilities, you can choose from 20 different pump models in the Series to fit your exact specifications.
Features:
- Manual On/Off Control, Automatic control or 4-20mADC Direct w/ stop function depending on the model.
- Manual control of stroke rate and length via control knobs on the front of the pump.
- Fuse mounted on the panel for extra protection.
- Designed out of water resistant material (perfect for indoor & outdoor placement).
|
1139.40 |
|
|
Pulsafeeder LB02SA-VHC1-XXX Pump A Plus 6Gpd
Max Flow: 0.25 gph (6 gpd)
Max Pressure: 150 psi (10 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVC (Polyvinyl Chloride)
Seats / O-Rings: CSPE (Hypalon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB02SA-VHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
674.06 |
|
|
Pulsafeeder LB02SA-VTC1-XXX Pump A Plus 6Gpd
Max Flow: 0.25 gph (6 gpd)
Max Pressure: 150 psi (10 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVC (Polyvinyl Chloride)
Seats / O-Rings: TFE (Teflon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB02SA-VTC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
690.94 |
|
|
Pulsafeeder LB02SA-KTC1-XXX Pump A Plus 6Gpd
Max Flow: 0.25 gph (6 gpd)
Max Pressure: 150 psi (10 BAR)
Power: 115 Volt / 50-60Hz
Head Fittings: PVDF (Kynar)
Seats / O-Rings: TFE (Teflon)
Balls: Ceramic
Tubing: 3/8" OD
Control: Manual On/Off
Pulsafeeder Pulsatron LB02SA-KTC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.
Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.
The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.
|
743.40 |
|
|
Pulsafeeder LC54SAPTC1-500 30Gpd 115V Polypr/Tef Meter
|
637.50 |
|
|
Jabsco's NEW VFlo Water Pressure Pump, Quiet With A Constant Flow
The new variable flow, constant water pressure pump now featuring the revolutionary new technology, designed to automatically diagnose and monitor all aspects of your pump and water pressure system performance to prevent system failure. V-FLO is powered by a new variable speed drive that delivers the exact amount of water flow needed to perform the variety of onboard delivery tasks.
Specials Closeouts Remanufactured Rebates
|
|
|
Sherwood G-30-2B Engine Cooling Pump All Bronze
FEATURES
Pump Body:
Bronze
Ports:
1" Hose
Cam:
Full
Impeller:
Neoprene
Shaft Seal:
Mechanical
Drive:
Bracket Mount Pulley Drive.
APPLICATIONS / CHARACTERISTICS
Flexible Impeller Engine Cooling Pump.
All Bronze version of Sherwood G-30-2.
Sherwood Engine Cooling Pump All Bronze for G30-2B G-30-2B, Chris Craft and Volvo Penta Model 350 16.80-18346
|
818.46 |
|
|
Sherwood R-30-G-1 WESTERBEKE PUMP
For Westerbeke 6 Cylinder Diesel 24102
Pump Body: Bronze
Ports: 1/2" NPT
Cam: Full
Impeller: Neoprene
Shaft Seal: Mechanical
Drive: Pulley Driven Pedestal Pump
|
939.20 |
|
|
Tuthill 000LE-A-7 Pump 3/8 Port
Type: Internal Gear
Maximum Flow Rate: 0.5 gpm
Max Pressure: 300 psi
Inlet/Outlet Port Sizes: 3/8 in NPT
Pump Body Material: Cast Iron
Wetted Materials: Steel, Carbon, Bronze, P/M Steel, PPS
O-Ring Material: Viton, Neoprene, EPR
Seal: Viton Mechanical Seal
Configuration Assembly: Tang Shaft
|
593.75 |
|