Quick Radio Remote Control Receiver 913Mhz Features Number of relays - 2 Full power range (from 10.5 to 31Vdc). Relay current carring capacity - 15 A Power absorption in stand-by mode - 25 mA Microcontroller-operated functions. FSK modulation and carrier frequency 913Mhz Operating temperatures from -15°C to +70°C Indication of the system operating status, errors and problems by means of LED and seven-segment display Protection against polarity inversion Protection against low battery 50 transmitters can be stored Translation mode to activate more receivers, installed in different spots, by means of one transmitter Programmable digital filter

Quick Pocket Transmitter Features Number of keys - 2 Power supply - CR2450 3V litio alkaline-battery Microcontroller-operated functions FSK modulation and carrier frequency 913Mhz Operating temperatures from -15°C to +70°C Possibility to control more receivers with one transmitter Two functions can be activated at the same time Floating

Quick Hand Held Transmitter Features Number of Keys - 2 Power Supply - 3 alkaline AAA batteries or rechargeable Nims Microcontroller-operated functions FSK modulation and carrier frequency 913Mhz Operating temperatures from -15°C to +70°C Possibility to control more receivers with one transmitter Two functions can be activated at the same time Floating Also working with rechargeable batteries Keyboard backlighting by means of LEDs

Wireless Remote Control & Relay Harness From the leader in the lighting industry.  This wireless RF remote control and and relay harness is the standard in making any Heise light function via remote control.   The HE-WRRK is a wireless remote control and receiver with a simple 2 wire connection to the battery so no wires are needed to be ran inside the vehicle. It is designed to be used with one HEISE LED light bar, driving light, or work light.  If an additional light bar is desired the HE-EYHK (Y ADAPTER HARNESS KIT) can be purchased which allows two HEISE light bars, driving lights, or work lights 150 watts or less each to be used with the HE-WRRK Specifications: Nine (9) Different Flash Options 9' Harness Length Black in color In the Box: One (1) Remote Control Receiver One (1) Battery Operated FOB One (1) Extension One (1) Adapter *Sold as an Individual

HRC1004 4 Button Remote Control HRC Quick Handheld is a multipurpose remote with 4 buttons. This remote is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with a connecting cable extensible up to 4.2 meters, a watertight deck plug and socket, and a support bracket for stowing after use. Applications Designed for the remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders, etc. Features: Watertight 4 buttons

Ray73 VHF Radio with AIS Receiver Raymarine’s Ray73 radiois communications central for your boat with built-in VHF, AIS andpublic-address capabilities.  Built on our full-sized marine radio chassis, the Ray73 comes with oversized controls and a big screen for easy operation offshore.     Ray73 is a full-function VHF marine radio with Class D Digital Selective Calling (DSC) and a built-in GPS receiver.  Simply program your boat’s MMSI number into the Ray73 and immediately benefit from the enhanced calling and safety features of DSC.  The Ray73 supports both NMEA2000 and legacy NMEA0183 networking which enables it to connect with other onboard electronics.  Ray63 also supports the connectionof an optional remotespeaker (A80542) to provide audio at a second location. Ray73 also comes with a built-in loudhailer output.  Add the optional hailing horn (M95435) and use your Ray73 tocommunicate with crewmembers on deck, on the dock, or on another boat.  The Ray73 can also generate manual or automatic fog signals with built-intone and gong sounds that comply with all international regulations. Ray73 also supports dual control stationswith the addition of the optional RayMic second station kit.  With an oversized LCD and simple controls, the RayMic is a compact all-in-one handset that fits easily on any secondary helm, tower or navigation station.  Use RayMic for station-to-station intercom capability too.  Ray73 was designed to comply with the latest international regulations and includes a connection point for an optional GPS/GNSS antenna system.  The optional antenna improves the GPS reception when the radio is mountedbelow deck, inan enclosed pilothouse, or inside a metal enclosure.   Features: Full-sized marine VHF with Digital Selective Calling Built-in Automatic Identification System (AIS) receiver Loudhailer output for public address and fog signaling Optional RayMic second station kit for full remote control Built-in GPS/GNSS receiver withan optionalexternal antenna connection Comaptible with Raymarine wireless hub and wireless handset Surface and trunnion mount kits included Complements the style and design of Axiom multifunction displays

Reactor™ Autopilot Remote Control Rugged, Water-resistant Remote Places Autopilot Control in the Palm of Your Hand Provides easy, convenient mode and steering control for your Garmin autopilot Gesture control for heading hold and course corrections lets you simply point the remote where you want to go Features a bright, sunlight-readable color display and an ergonomic design for comfort and control Programmable preset buttons allow quick access to your favorite functions Water-resistant design floats, in case it’s dropped in the water Boasting a bright, sunlight-readable color display and an enhanced user experience, the Autopilot Remote also features a comfortable ergonomic design and programmable presets for quick access to your favorite functions. You can control steering with ease. The remote even lets you use gestures for heading hold and course corrections; just point the remote where you want to go. No need to worry if the remote takes a trip overboard, because it’s water-resistant and it floats. The Autopilot Remote includes both wrist and neck lanyards as well as a mountable cradle. And with a 45’ range, it’s functional from anywhere on the boat. It’s never been easier to place autopilot control in the palm of your hand. For use with GHC 20 and compatible¹ chartplotters to control your autopilot. ¹Compatible chartplotters include GPSMAP 7x2/9x2/12x2 Touch, 10x2/12x2, 74/7600, 84/8600 and newer models. In The Box: Reactor autopilot remote control Wrist lanyard Neck lanyard Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RF Remote Control f/Explorer NavPro GPS Radio Frequency Remote Control for Explorer NavPro GPS Operate unit from multiple locations

RMK-10 System Remote Control Portrait Keypad Remote Keypad is an ultra-compact wired keypad accessory that provides full control of aSeries, cSeries, eSeries, eS Series and gS Series Multifunction Displays (MFDs) from any mounting location. The fully backlit RMK-10 includes dedicated keys for home, menu, zoom in/out, window control, waypoint management, power/brightness, as well as Evolution autopilot control. RMK-10 also features the same multifunction rotary controller with the integrated cursor pad found on eS Series multifunction displays The RMK-10 can be surface-mounted or flush-mounted, and is available with key mats for horizontal or vertical installation. This gives you the flexibility to install the RMK-10 just about anywhere. Utilising Raymarine’s RayNet high speed networking, the RMK-10 can be setup to control a single multifunction display, or multiple displays mounted at the same location. When controlling multiple displays on the same helm, the RMK-10 provides seamless control across all of the displays. When used with aSeries or gS Series Multitouch displays, the RMK-10 brings full HybridTouch™ control capability to these products. The RMK-10 integrates seamlessly with the LightHouse II user interface and allows the navigation system to be operated solely by touch, by keypad, or any variation between. Mounting Options The RMK-10 is the perfect solution for controlling MFD’s mounted beyond arm’s reach, or in overhead electronics boxes. Instead of reaching for the MFD, the RMK-10 brings the system’s controls to you. For the ultimate in convenience, mount the RMK-10 in the arm of your favorite helm chair. Now it’s easy to sit back, relax and enjoy the ride on autopilot, while still being able to interact with your navigation system. RMK-10 is also great for bringing remote system control to secondary monitors and onboard LCD TV sets connected to the VGA or HDMI output of select e-Series, eS-Series and gS-Series displays. Now you can see and control your Raymarine navigation system from a below-deck navigation table, salon or stateroom. Specifications: PoE classClass 1 Nominal supply voltage12 / 24 V dc Operating voltage range10.8V dc to 31.2V dc Power consumption3.84W Environmental: Operating temperature-25ºC to +55ºC (-13ºF to 131ºF) Storage temperature-30ºC to +70ºC (-22ºF to 158ºF) Relative humidityMaximum 75% Waterproof ratingIPX6 Wired Connections: Network / power1 x RayNet connector | (gS Series - 1000 Mb/s plus PoE) | (aSeries , cSeries, eSeries - 100 Mb/s) Alternate power1 x power connector

MS-RGBRC RGB Lighting Control Module with Wireless Remote Control Enhance your on-board audio entertainment experience with not only brilliant audio, but LED illumination options to match! The MS-RGBRC wireless remote lets you take control of your on-water experience to adjust the lighting of your Fusion RGB speakers. This portable wireless remote will function up to 10m from the speaker lighting control module, giving you the freedom to adjust the illumination from anywhere on your boat. Both static and dynamic color options are available, with the color easily selectable on the intuitive color select wheel.  Wireless Control of Your LED Illumination Enjoy full control of the illumination of your Fusion RGB speakers with the MS-RGBRC wireless remote control. The remote is portable and will function up to 10m from the speaker lighting control module. Static and Dynamic Color Options A range of colors are available in both static and dynamic modes with the RGB speakers to complement your music and enhance your on-board audio entertainment experience. Simply select any color on the remote’s color wheel or change modes to cycle automatically through predefined lighting patterns. Intuitive Touch Controls Adjusting the lighting of your Fusion RGB speakers is made easy with touch controls including an intuitive color-select wheel.  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LR-1 Rremote Controller Control your HDS LIVE display from anywhere on your boat with the Lowrance LR-1 Remote Controller. Mark waypoints and zoom in/zoom out using preprogrammed keys and access up to five user-programmable favorites without ever touching your HDS LIVE display. The LR-1 connects to HDS LIVE via Bluetooth_ and features simple, short- and long-press programming functionality, making it easy to save your favorite functions to the remote. Features: Control HDS LIVE from anywhere on your boat Five user-programmable options Easy-to-use long- and short-press programming functionality Preprogrammed zoom in/zoom out and waypoint keys Bluetooth connectivity

RMK-10 System Remote Control - Portrait & Landscape Keypad Raymarine's RMK-10 Remote Keypad is an ultra-compact wired keypad accessory that provides full control of aSeries, cSeries, eSeries, eS Series and gS Series Multifunction Displays (MFDs) from any mounting location.  The fully backlit RMK-10 includes dedicated keys for home, menu, zoom in/out, window control, waypoint management, power/brightness, as well as Evolution autopilot control. RMK-10 also features the same multifunction rotary controller with the integrated cursor pad found on eS Series multifunction displays The RMK-10 can be surface-mounted or flush-mounted, and is available with key mats for horizontal or vertical installation. This gives you the flexibility to install the RMK-10 just about anywhere. RMK-10 Mounting Options The RMK-10 is the perfect solution for controlling MFD’s mounted beyond arm’s reach, or in overhead electronics boxes. Instead of reaching for the MFD, the RMK-10 brings the system’s controls to you. For the ultimate in convenience, mount the RMK-10 in the arm of your favorite helm chair. Now it’s easy to sit back, relax and enjoy the ride on autopilot, while still being able to interact with your navigation system. RMK-10 is also great for bringing remote system control to secondary monitors and onboard LCD TV sets connected to the VGA or HDMI output of select e-Series, eS-Series and gS-Series displays. Now you can see and control your Raymarine navigation system from a below-deck navigation table, salon or stateroom. Networking & Control Utilizing Raymarine’s RayNet high speed networking, the RMK-10 can be setup to control a single multifunction display, or multiple displays mounted at the same location. When controlling multiple displays on the same helm, the RMK-10 provides seamless control across all of the displays. When used with aSeries or gS Series Multitouch displays, the RMK-10 brings full HybridTouch™ control capability to these products. The RMK-10 integrates seamlessly with the LightHouse II user interface and allows the navigation system to be operated solely by touch, by keypad, or any variation between.

MCU006 Vertical Remote Control  Total Control with ease and comfort.  Furuno's MCU006 Series of Remote Controller for NavNet TZtouch3, TZtouchXL, and TZT2BB Multi-Function Displays feature a comfortable rotary knob and beveled keys for enhanced ease of use. The large knob can be utilized as the RotoKey and for zooming in/out on both TZtouch3 and TZtouchXL. The remote also has 10 dedicated buttons that operate different functions. A single MCU006 can control all of the displays. With a simple press of the Active Display Button, you can switch from one display to another. The MCU006 Remote Control is a perfect companion for any helm or bridge. Whether you want to mount the controller in the arm of the captain's chair, or you have a center console and want to have a remote on the transom while you are fishing, the MCU006 is an ideal solution.

Battery Status and Freedom Inverter/Charger Remote Control Provides Valuable Inverter/Charger System Monitoring and Control The Freedom Remote Control Panel (part#84-2056-01) allows you to control your Freedom Combi, Freedom 458 and Freedom Marine Series Inverter/Charger system from any convenient location. It is easy to read, operate and install, and all controls can be accessed directly from the front panel. Note: Not for Freedom HF or Freedom SW Series. Product Features Independent invert and charge on/off controls Push button control of power sharing, equalizing, battery set-up Multi-colored LED displays battery state of charge, fault conditions, AC input, DC voltage and DC amperage LED warning indictors for low battery and overload warning Splash resistant design Incoming AC breaker selection allows programmable power sharing Easy to install 25' Cable One year warranty Note: The 24-volt models of Freedom Combi inverter/chargers require a different Freedom Remote the Freedom Remote - 24V SKU 82-0101-04 WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

S100 Wireless SeaTalk autopilot remote control S100 Wireless Autopilot Remote Compact and lightweight, the S100 remote delivers the freedom of wireless control to any Raymarine SeaTalk autopilot. The bright display is easy to read with two lines of text and a graphical autopilot mode indicator. The 5 button ergonomic keypad and intuitive menu structure provides simple operation and easy access to extended features. Rugged and waterproof the S100 fits in your pocket or clips to your belt, keeping full function autopilot control always within reach. S100 Features Two line display with a graphical autopilot status indicator Crisp, high contrast 24 x 127 dot matrix display Backlit display Raised profile on Standby button for easy identification in the dark Keylock security Convenient, replaceable AAA alkaline batteries No longer comes with Belt clip Wireless Features: Up to 32 feet (10 meters) wireless operating range from the base station Signal strength indicator Pre-registered each unit leaves the factory already registered to the base station S100 comes with Instruction Manual, S100 Controller, Base Station, Cradle, Lanyard The S100 wireless autopilot controller is compatible with the following Raymarine/Autohelm SeaTalk Autopilots: ST1000 ST2000 ST3000 ST4000 ST5000 SmartPilot ST6001 SmartPilot ST7001 SmartPilot ST8001 SmartPilot S1000