|
32oz Stainless Steel Cleaner
This is a phosphoric acid-based stainless steel cleaner.
Features:
It removes rust staining and surface corrosion from polished marine-grade stainless steel
Shelf Life at 23 degrees Celsius is 24 months
Specifications:
pH Value: 1.0
Size: 32oz bottle
Contents: Contains non-ionic surfactants < 5%
Recommended Applications: A brush is recommended, but cotton, a rag, or a sponge may be used
Recommended Use
Used for cleaning rust staining and surface corrosion from polished marine-grade stainless steel.
Surface Preparation
Apply the product to the area to be treated. Allow it to work for up to 30 minutes. Rinse well with fresh water and a sponge.
Pre-treatment
Clean with detergent.
Storage
This product must be stored in accordance with national regulations. Keep the containers in a dry, cool, and well-ventilated space away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.
|
29.32 |
|
|
32oz Boat Cleaner - Removes Waterline & Rust Stains
This is an ethanedioic acid-based cleaner.
Features:
This cleaner removes yellow/brown waterline stains/scum and rust stains
Shelf Life at 23 degrees Celsius is 24 months
Specifications:
pH Value: 1.0
Size: 32oz bottle
The Product Can Be Applied By: A brush is recommended, but cotton, a rag, or a sponge may be used
Product Mixing Ratio (By Volume): Single pack
Recommended Use
To be used for cleaning the waterline staining and rust staining on GRP and painted surfaces.
Surface Preparation
Apply the product to the area to be treated. Allow it to work for up to 10 minutes. Rinse well with fresh water and a sponge.
Pre-treatment
Clean with detergent.
Storage
This product must be stored in accordance with national regulations. Keep the containers in a dry, cool, and well-ventilated space away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.
|
30.85 |
|
|
Super Stainless is a water based, non-toxic, biodegradable, stainless steel cleaning solution formulated to remove rust stains and corrosion from the stainless fittings, cleaning and protecting them from further attack on board your boat.
|
|
|
16oz Stainless Steel Cleaner
This is a phosphoric acid-based stainless steel cleaner.
Features:
It removes rust staining and surface corrosion from polished marine-grade stainless steel
Shelf Life at 23 degrees Celsius is 24 months
Specifications:
pH Value: 1.0
Size: 16oz bottle
Contents: Contains non-ionic surfactants < 5%
Recommended Applications: A brush is recommended, but cotton, a rag, or a sponge may be used
Recommended Use
Used for cleaning rust staining and surface corrosion from polished marine-grade stainless steel.
Surface Preparation
Apply the product to the area to be treated. Allow it to work for up to 30 minutes. Rinse well with fresh water and a sponge.
Pre-treatment
Clean with detergent.
Storage
This product must be stored in accordance with national regulations. Keep the containers in a dry, cool, and well-ventilated space away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.
|
19.28 |
|
|
Stainless Steel Cleaner - 16oz
Cleans and protects in one easy step. Non-streaking formula. Removes grease and stains. Easy spray-on, wipe-off. Leaves surface fingerprint resistant.
|
14.39 |
|
|
Stainless Steel Cleaner - 16oz *Case of 12*
Cleans and protects in one easy step. Non-streaking formula. Removes grease and stains. Easy spray-on, wipe-off. Leaves surface fingerprint resistant.
|
212.21 |
|
|
Gianneschi SUPER LARIO 2 Bronze Hand Pump 1"
Gianneschi SUPER-LARIO-3, SUPER LARIO 3 Self Priming Double Acting Piston Pump, rated for 9.2 GPM, Bronze construction, Bronze impeller. Inlet Port is 1 Inch, Discharge Port is 1 Inch.
Applications for the SUPERLARIO3 include pumping aggressive liquids, bilge emptying, tanks, diesel oil intake, oil transfer.
|
2540.79 |
|
|
Gianneschi SUPER LARIO 3 Bronze Hand Pump 1 1/4"
Gianneschi SUPER-LARIO-3, SUPER LARIO 3 Self Priming Double Acting Piston Pump, rated for 13.2 GPM at 95 feet head (40 PSI), Bronze construction, Bronze impeller. Inlet Port is 1-1/4 Inch, Discharge Port is 1-1/4 Inch.
Applications for the SUPERLARIO3 include pumping aggressive liquids, bilge emptying, tanks, diesel oil intake, oil transfer.
|
3446.19 |
|
|
Large Stainless Steel Bolt-less Rod Holder - 0°
2020 IBEX Innovation Award Winner. This patent-pending rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Rupp heavy-duty rod holders are the perfect combination of form and function with an exclusive forged end cap that gives unbreakable rod support while providing a completely finished look and mirror-like finish
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
168.52 |
|
|
Large Stainless Steel Bolt-less Rod Holder - 15°
2020 IBEX Innovation Award Winner. This patent-pending rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Rupp heavy-duty rod holders are the perfect combination of form and function with an exclusive forged end cap that gives unbreakable rod support while providing a completely finished look and mirror-like finish
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
151.67 |
|
|
Large Stainless Steel Bolt-less Rod Holder - 30°
2020 IBEX Innovation Award Winner. This patent-pending rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Rupp heavy-duty rod holders are the perfect combination of form and function with an exclusive forged end cap that gives unbreakable rod support while providing a completely finished look and mirror-like finish
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
151.67 |
|
|
Large Stainless Steel Bolt-less Swivel Rod Holder - 0°
2020 IBEX Innovation Award Winner. This patent-pending SWIVEL rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
164.66 |
|
|
Large Stainless Steel Bolt-less Swivel Rod Holder - 15°
2020 IBEX Innovation Award Winner. This patent-pending SWIVEL rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
164.66 |
|
|
Large Stainless Steel Bolt-less Swivel Rod Holder - 30°
2020 IBEX Innovation Award Winner. This patent-pending SWIVEL rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
164.66 |
|
|
SC80 Satcom Mount - Stainless Steel
Manufactured from marine grade Stainless Steel.
Your chosen antenna will attach through external fixings and pre-drilled mounting holes, making installation and maintenance easy to perform.
Compatible Units:
JRC - JUE-501 Fleetbroadband
KVH - Fleet BB 500 / V7, V7IP(M9 matching dome), TracPhone V7-HTS, TracVision G8, M9, TV8
Features:
Reduces the overall footprint of the Satcom antenna
Mirror polished for a hi-end finish
Satcom mounting hardware is hidden internally
Watertight installation
Technical Specifications:
Material - Stainless Steel
Height - 3.14" (80mm)
Mounting Type - Vertical
In the Box:
Mount
Mount seal
Mounting hardware (excluding screws/bolts)
Instruction manual
*Sold as an Individual
|
1022.63 |
|