|
Sealink Deluxe 12 Volt Receptacle
12VRC
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
11.99 |
|
|
SeaLink® Deluxe 12 Volt Plug
Moisture proof sealing ring
LED power indicator light
Interchangeable 10A fuse
Internal strain relief and cord seal
Compatible with standard 12V receptacles
Max. rating is 10A
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.96 |
|
|
SeaLink® Deluxe Dual USB Charger & 12V Receptacle
12VDC input
Dual USB has 5V, 2.1 amp total output
LED power indicator light for USB
Receptacle has 12VDC output, rated up to 20 amps
Water resistant covers protects against dust and water
Insulated terminals included
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.50 |
|
|
SeaLink® Deluxe Dual USB Charger Receptacle
12 to 24VDC input
5v, 2.1 amp total output
LED power indicator light for USB
Water resistant cover protects against dust and water
Insulated terminals included
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.54 |
|
|
Stainless Steel 12V Receptacle with Cap
12-Volt Receptacle - High quality, 12V female socket with watertight cap. Stainless steel construction.
Features:
AFI 12V stainless steel receptacle with cap
High quality, 12V female socket, with water tight cap
Highly recommended and durable
Stainless Steel construction
12V female socket
Includes watertight cap
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
18.06 |
|
|
March 809 BR 12VDC
Applications for the 809-BR 12V & 24V Magnetic Drive Pump include hot water systems, refrigeration systems and solar heating.
March Pump's industrial 809-BR 12V & 24V is an American seal-less centrifugal magnetic drive pump ideal for applications such as hot water systems. It is capable of generating a maximum flow of 5 gallons per minute at 1.5 feet, and its maximum head is 7 Feet (or around 3PSI). The standard wet end (the materials that come into contact with the solution) is composed of Bronze, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.5 male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 0.01 Horsepower DC Brush Type Motor, available in 12 or 24 Volts. The 12 Volt motor has an operating range from 0 to 14 Volts, and the 24 Volt motor has an operating range from 0 to 26 Volts. The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.
Max Flow
5 GPM
18.9 LPM
Max Head
7.1 FT
2.1 M
Power
.01 HP
.007 KW
Electrical
12V Range 0-14 or 24V Range 0-26
|
459.23 |
|
|
March 809-BR-HS 12V Mag Drive Pump
Applications for the 809-BR-HS 12V Magnetic Drive Pump include hot water systems and solar heating.
March Pump's industrial 809-BR-HS 12V & 24V is an American seal-less centrifugal magnetic drive pump ideal for applications such as hot water systems. It is capable of generating a maximum flow of 6 gallons per minute at 2.5 feet, and its maximum head is 15.5 Feet (or around 6.5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Bronze, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.5 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 0.04 Horsepower DC Brush Type Motor, available in 12 or 24 Volts. The 12 Volt motor has an operating range from 0 to 14 Volts, and the 24 Volt motor has an operating range from 0 to 26 Volts. The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.
Max Flow
6 GPM
22.7 LPM
Max Head
15.5 FT
4.7 M
Power
.04 HP
.029 KW
Electrical
12V Range 0-14 or 24V Range 0-26
Type
Centrifugal Mag Drive
Inlet
1/2"MPT
Outlet
1/2"MPT
Wet End
Bronze (Front Housing), Stainless Steel (Rear Housing, Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
|
465.08 |
|
|
Applications for the 809-BR-HS 12V Magnetic Drive Pump include hot water systems and solar heating.
March Pump's industrial 809-BR-HS 12V & 24V is an American seal-less centrifugal magnetic drive pump ideal for applications such as hot water systems. It is capable of generating a maximum flow of 6 gallons per minute at 2.5 feet, and its maximum head is 15.5 Feet (or around 6.5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Bronze, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.5 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 0.04 Horsepower DC Brush Type Motor, available in 12 or 24 Volts. The 12 Volt motor has an operating range from 0 to 14 Volts, and the 24 Volt motor has an operating range from 0 to 26 Volts. The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.
Max Flow
6 GPM
22.7 LPM
Max Head
15.5 FT
4.7 M
Power
.04 HP
.029 KW
Electrical
12V Range 0-14 or 24V Range 0-26
Type
Centrifugal Mag Drive
Inlet
1/2"MPT
Outlet
1/2"MPT
Wet End
Bronze (Front Housing), Stainless Steel (Rear Housing, Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
|
526.73 |
|
|
Sealink 12V Plug & Receptacle
12VPK
Product Features:
SeaLink Deluxe 12 Volt Receptacle and Plug
Part Nos. 12VRC & 12VPG packaged together
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.52 |
|
|
Waterproof Wiper Motor 12V - 2.5" Shaft - 80° Sweep
The 1.5 Waterproof Wiper Motor is made with a fully sealed powder coated aluminum waterproof base and housing to power a 22" Deluxe arm and 22" Deluxe blade combination or a 20" Premier arm and 20" Premier blade combination.
Features:
Available in three shaft lengths: 1.5", 2.5" and 3.5" (includes .5" length of knurled arm fitting)
Factory pre-set sweep angles of 80 degrees or 110 degrees, with easy adjustment to 45 degrees or 60 degree
Chrome plated solid brass knurled drive nut with brass and stainless steel driveshaft
Two-speed motor
Sealed 6" wire leads, 16 AWG
Adjustable right or left self-parking
0.625" diameter shaft (16 mm)
Available in 12V and 24V models
Coast to park
RF shielded circuitry
Retail version includes 5 amp fuse and holder (operating switch not included)
Measures approximately 7.75" L x 4" W x 2.75" D
Stall torque: 109 in-lbs (125 kgf/cm; 12.3 Nm)
Stall current: 11.5-13.0 amps
No load current: 0.5-1.2 amps
Replaces AFI 2000 motor
|
231.17 |
|
|
ConnectPro® Charging/Trolling System Receptacle & Plug
ConnectPro® Receptacle
Universal design for 2 or 3-wire configuration 12, 24, 12/24, 24/36 or 36 volt systems
Watertight sealing cap
Corrosion resistant, plated brass electrical components
Drain holes in receptacle keep water away from electrical components
Perma-Lock™ screw terminals will not loosen under extreme hull vibration
Standard 1-1/8" diameter mounting hole
Easy to install, with supplied mounting plate for front panel installation, or locking ring for rear access installation
Accepts 10 and 8 gauge wire
Easily replaces other trolling motor plugs and receptacles
ConnectPro® Plug
O-ring seal for waterproof connections
Weather resistant plug cover
Corrosion resistant, plated brass electrical components
Accepts 16 to 8 gauge wire
Ergonomic contoured grip for easy hook-up and ground blade alignment
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
42.61 |
|
|
30A 125V Locking Receptacle
Product Features:
NEMA L5-30R
Marinco 3-Wire System
Glass-reinforced corrosion resistant nylon
Accepts up to 8 gauge stranded wire or up to 6 gauge with ring terminals
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
30.83 |
|
|
Receptacle & Bracket
Spring loaded flip lid cover and 2018BR receptacle, pre assembled
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
69.26 |
|
|
70A Trolling Motor Plug & Receptacle
Increased amperage for modern trolling motors.
Features:
70A continuous rating
Sealed, waterproof connection
Integrated strain relief
Keyed design with thumbprint locator
Accepts up to 6AWG wire
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
50.78 |
|
|
Wiper Arm Deluxe Black Stainless Steel Pantographic - 17"-22" Adjustable
Deluxe arms are used on Standard and Heavy-Duty motors.
Features:
Stainless Steel
Arm has "articulating/bend-back" feature
Motor shaft mounting has additional set screw clamping
For use with 2.5, 1.5 and MRV Motors
Dry pantographic wiper style
|
57.95 |
|