|
IWAKI 23020, COUPLING NUT
|
8.03 |
|
|
IWAKI 24005, COUPLING NUT KBR
|
9.18 |
|
|
RAM® Tough-Ball™ with Coupling Nut for WeBoost Antennas
This WeBoost Kit Ball adapter consists of a 1.5" diameter RAM® Tough-Ball™ ball connected to a 3/8"-24 x .375" male threaded post with a coupling nut and two lock washers. The ball is compatible with all RAM® C Size ball & socket components, allowing you to secure your WeBoost antenna in virtually any location.
Features:
This WeBoost Adapter features a RAM® Tough-Ball™ with a 3/8"-24 x .375" male threaded post with a coupling nut and two lock washers
Included C size 1.5" RAM® rubber balls allow for connection to any C size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
Made of high-strength composites with stainless steel thread post for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: (1) Coupling Nut, (2) Lock Washers
Thread Pitch: 3/8"-24 x 0.375"
Ball Size: C Size (1.5")
Materials: High strength composite/Stainless steel threads
Weight: 0.24lbs
|
18.30 |
|
|
Iwaki MD-100RLT, 1 inch MPT in/outlet 1986gph 120v
Iwaki MD-100RLT Water Pump
Mag Drive Centrifugal Pump and Motor Assembly, GFRPP Polypropylene Construction, close coupled to a 1/3 Horsepower, 115 Volts AC, 1 Phase, TEFC Electric Motor. 1 Inch NPT Threaded Port Connections.
Japanese pressure rated flow pump.
1 inch MPT inlet and outlet.
1/3 HP Motor output.
3300 RPM motor speed.
120 volts
3.4 amps.
Max flow 35.6 GPM.
1986 GPH at 6 feet of head.
Max head 39.0 ft.
Max system pressure 25.6 psi.
Twin bearing system handles thrust loads, extends service life
Hollow rotating / internal cooling circuit reduces bearing temperature.
Compact / Quiet energy for easy maintenance.
Few moving parts for easy maintenance
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
Iwaki America Inc. of Holliston, Massachusetts, is a joint venture which grew from a 15 year association between Walchem Corp. of Holliston, MA and Iwaki Co. Ltd. of Tokyo, Japan. Combining Walchems 30 years of chemical injection and control experience with Iwakis 50 years of pump design engineering, Iwaki America offers the best chemical handling equipment for use in Chemical Process, O.E.M., Industrial and Semiconductor applications.
|
748.00 |
|
|
MP Pump 23020 Hsg Asy B:22250 Flo S Svc
|
2485.84 |
|
|
IWAKI 2KBA-3ZBU1, PUMP DOUBLE BELLOWS 100V
Blow-molded polypropylene bellows ensuring even wall thickness for long life
Easy output adjustment, Simple liquid end construction assuring trouble-free pumping
Anti-syphon spring (Hastelloy C) available
Sure-seating elastomeric poppet valves provide positive backflow protection
Optional duckbill valves for slurries
Thermoplastic motor housing, Stainless steel or non-metallic frame
DC motor options available
Addressing the specific requirements of equipment manufacturers, Iwaki America has developed a full line of economical, versatile, OEM and Multiplex pumps featuring rugged gear-motor drives and flexible designs. Proven performers, Iwaki America bellows pumps are extensively used in the photographic, plating and electronics industries.
|
377.52 |
|
|
IWAKI 2KBA-3ZBU2, PUMP DUPLEX BELLOWS
Blow-molded polypropylene bellows ensuring even wall thickness for long life
Easy output adjustment, Simple liquid end construction assuring trouble-free pumping
Anti-syphon spring (Hastelloy C) available
Sure-seating elastomeric poppet valves provide positive backflow protection
Optional duckbill valves for slurries
Thermoplastic motor housing, Stainless steel or non-metallic frame
DC motor options available
Addressing the specific requirements of equipment manufacturers, Iwaki America has developed a full line of economical, versatile, OEM and Multiplex pumps featuring rugged gear-motor drives and flexible designs. Proven performers, Iwaki America bellows pumps are extensively used in the photographic, plating and electronics industries.
|
377.52 |
|
|
IWAKI KBA-3ZBU2, PUMP SINGLE BELLOWS 115V
Addressing the specific requirements of equipment manufacturers, Iwaki America has developed a full line of economical, versatile, OEM and Multiplex pumps featuring rugged gear-motor drives and flexible designs. Proven performers, Iwaki America bellows pumps are extensively used in the photographic, plating and electronics industries.
Blow-molded polypropylene bellows ensuring even wall thickness for long life
Easy output adjustment, Simple liquid end construction assuring trouble-free pumping
Anti-syphon spring (Hastelloy C) available
Sure-seating elastomeric poppet valves provide positive backflow protection
Optional duckbill valves for slurries
Thermoplastic motor housing, Stainless steel or non-metallic frame
DC motor options available
|
245.44 |
|
|
Iwaki MD-70RLZT, 3/4 inch MPT in/outlet 684gph 220v
Iwaki MD-70RLZT Water Pump
Japanese made high pressure rated pump.
3/4 inch MPT inlet and outlet.
2/7 HP Motor output.
3400 RPM motor speed.
220 Volt
1.90 amps.
Max flow 11.4 GPM.
684 GPH
Max head 66.6 ft.
Max system pressure 42.7 psi.
Iwaki water pumps are magnetic driven, seamless pumps for use on either freshwater or saltwater aquariums. These pumps have a low heat exchange rate combined with quiet operation. Also the Iwaki pumps have a highly durable and aquarium tested design.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
Iwaki America Inc. of Holliston, Massachusetts, is a joint venture which grew from a 15 year association between Walchem Corp. of Holliston, MA and Iwaki Co. Ltd. of Tokyo, Japan. Combining Walchems 30 years of chemical injection and control experience with Iwakis 50 years of pump design engineering, Iwaki America offers the best chemical handling equipment for use in Chemical Process, O.E.M., Industrial and Semiconductor applications.
|
693.00 |
|
|
IWAKI MD-6, 230v MAG DRIVE PUMP
Iwaki MD-6-230 Mag Drive Centrifugal Pump and Motor Assembly, GFRPP Polypropylene Construction, close coupled to a 1/250 Horsepower, 230 Volts AC, 1 Phase Electric Motor. 35/64 Inch Hose Barb Port Connections.
|
159.12 |
|
|
IWAKI MD-6Z, 115volts Mag Drive Pump
Iwaki Mag Drive Centrifugal Pump and Motor Assembly, High head impeller, GFRPP Polypropylene Construction, close coupled to a 1/250 Horsepower, 115 Volts AC, 1 Phase Electric Motor. 35/64 Inch Hose Barb Port Connections.
|
159.12 |
|
|
IWAKI MD-6Z, 220volt HIGH HEAD MAG DRIVE PUMP
Iwaki Mag Drive Centrifugal Pump and Motor Assembly, High head impeller, GFRPP Polypropylene Construction, close coupled to a 1/250 Horsepower, 220 Volts AC, 1 Phase Electric Motor. 35/64 Inch Hose Barb Port Connections.
|
141.00 |
|
|
Iwaki MD-30RLT, 3/4 inch MPT in/outlet 480gph 120v
Iwaki MD 30RLT Water Pump
Japanese pressure rated flow water pump.
3/4 inch MPT inlet and outlet.
1/16 HP Motor output.
3150 RPM motor speed.
0.8 amps.
Max flow 10.0 GPM.
480 GPH at 6 feet of head.
Max head 17.7 ft.
Max system pressure 11.60 psi.
Iwaki water pumps are magnetic driven, seamless pumps for use on either freshwater or saltwater aquariums. These pumps have a low heat exchange rate combined with quiet operation. Also the Iwaki pumps have a highly durable and aquarium tested design.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
310.00 |
|
|
Iwaki MD-55RLT, 1 inch MPT in/outlet 990gph 120v
Iwaki MD55RLT Water Pump
Japanese pressure rated water pump.
1 inch MPT inlet and outlet
1/8 HP Motor output.
3400 RPM motor speed.
120 Volt
1.60 amps.
Max flow 18.4 GPM.
990 GPH at 6 feet of head.
Max head 26.9 ft.
Max system pressure 17.06 psi.
Iwaki water pumps are magnetic driven, seamless pumps for use on either freshwater or saltwater aquariums. These pumps have a low heat exchange rate combined with quiet operation. Also the Iwaki pumps have a highly durable and aquarium tested design.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
552.00 |
|
|
Iwaki MD-70RLT, 1 inch MPT in/outlet 1440gph 120v
Iwaki MD-70RLT Water Pump
Japanese pressure rated water pump.
1 inch MPT inlet and outlet.
1/4 HP Motor output.
3400 RPM motor speed.
120 volt
2.80 amps.
Max flow 25.6 GPM.
1440 GPH at 6 feet of head pressure
Max head 31.8 ft.
Max system pressure 21.33 psi.
Iwaki water pumps are magnetic driven, seamless pumps for use on either freshwater or saltwater aquariums. These pumps have a low heat exchange rate combined with quiet operation. Also the Iwaki pumps have a highly durable and aquarium tested design.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
618.00 |
|