|
Antenna Cable Kit - 20M
Iridium's mast antenna cable - 20-Meter
Antenna cables for the Iridium passive Mast Antenna. The cable is made of high quality LMR 240 and each end of the cable has a male TNC connector. The Iridium Mast Antenna is sold separately. These cables cannot be used with active antennas.
Installation and Weather Proofing: During installation, be very careful to avoid sharp bends in the coaxial antenna cable which increase signal loss. It is important to weatherproof the exposed connectors between the Mast Antenna and the antenna cable. This prevent moisture and salt water intrusion into the connection which can cause corrosion. For most applications, we recommend Coax-Seal Tape (hand moldable plastic) as a reliable weatherproofing product.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
330.00 |
|
|
Antenna Cable Kit - 10M
Iridium's mast antenna cable - 10-Meter
Antenna cables for the Iridium passive Mast Antenna. The cable is made of high quality LMR 240 and each end of the cable has a male TNC connector. The Iridium Mast Antenna is sold separately. These cables cannot be used with active antennas.
Installation and Weather Proofing: During installation, be very careful to avoid sharp bends in the coaxial antenna cable which increase signal loss. It is important to weatherproof the exposed connectors between the Mast Antenna and the antenna cable. This prevent moisture and salt water intrusion into the connection which can cause corrosion. For most applications, we recommend Coax-Seal Tape (hand moldable plastic) as a reliable weatherproofing product.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
233.33 |
|
|
Antenna Cable Kit - 15M
Iridium's mast antenna cable - 15-Meter
Antenna cables for the Iridium passive Mast Antenna. The cable is made of high quality LMR 240 and each end of the cable has a male TNC connector. The Iridium Mast Antenna is sold separately. These cables cannot be used with active antennas.
Installation and Weather Proofing: During installation, be very careful to avoid sharp bends in the coaxial antenna cable which increase signal loss. It is important to weatherproof the exposed connectors between the Mast Antenna and the antenna cable. This prevent moisture and salt water intrusion into the connection which can cause corrosion. For most applications, we recommend Coax-Seal Tape (hand moldable plastic) as a reliable weatherproofing product.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
263.99 |
|
|
External GPS/Iridium Antenna with Adapter Cable
Use our external passive antenna/extension cable when you want to install an external GPS/Iridium antenna. Can be used on the exteriors of vehicles or buildings as the antenna is magnetic. The antenna cable is 1.5 meters (4.9 ft) long; the dongle, or adapter cable, is about 0.2 meters (8 in).
|
95.98 |
|
|
All-Americas i-Series (i3-i6) TVRO Spares Kit
lntellian supplies 3 types of TVRO spare parts kits with replacement LNBs, ACUs, and control board components to ensure that technicians have what they need on hand. All kits come neatly packaged in a custom rugged case. Each part is individually wrapped and labeled with a part number and description.
**Does not support i2 Intellian antennas**
What's In The Box?
All-Americas LNB (Part # S2-0820)
DC Powered ACU (Part # BP-T901P)
Antenna Control Board (Part # S3-0503)
|
971.99 |
|
|
WorldView i-Series (i6W-i9W) TVRO Spares Kit
lntellian supplies 3 types of TVRO spare parts kits with replacement LNBs, ACUs, and control board components to ensure that technicians have what they need on hand. All kits come neatly packaged in a custom rugged case. Each part is individually wrapped and labeled with a part number and description.
In the Box:
WorldView LNB (Part # S2-0817_B)
DC Powered ACU (Part # BP-T901P)
Antenna Control Board (Part # S3-0506_A)
|
3038.70 |
|
|
4078-20-ER 20' Extension Cable Kit for VHF, AIS, CB Antenna with RG-8x & Easy Route FME Mini-End
The cable that connects your antenna to your radio can make or break signal quality literally. Shakespeare offers a range of coaxial cables tailored to the needs of marine communications, and to withstand the rigors of the boating environment.
Features:
20' Length
White
|
56.99 |
|
|
15M Antenna Cable for SC50
Furuno's 15M antenna cable specifically for the SC50 4.5" Monochrome LCD Display, Satellite Compass with Three GPS Antenna Receivers.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
409.09 |
|
|
Antenna Cable
Use this 32'(10m) cable to connect your antenna to your compatible Garmin chartplotter.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
39.47 |
|
|
20' Cable Kit for Phase III VHF/AIS Antennas - 2 Screw On PL259S & RG-8X Cable with FME Mini Ends Included
Easy Route Accessory - 20' cable kit for Phase III VHF/AIS antenna. 2 screw-on PL-259s and RG8X cable with FME mini-ends included.
|
60.35 |
|
|
Antenna Cable for Cortex® V1 & M1
Use this 32 ft cable to connect your antenna to your compatible Cortex VHF and AIS.
Features:
Cable fitted for Cortex® V1 & M1
32' cable
|
31.91 |
|
|
NMEA 0183 Antenna Cable, 7 Pin, 15 Meters
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
136.37 |
|
|
NMEA 0183 Antenna Cable, 7 Pin, 25 Meters
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
174.54 |
|
|
NMEA 2000 Starter Cable Kit
Nearly every new marine electronics product has an NMEA2000 interface now, but it is still “black magic” to many boat owners and even fairly technical users struggle to understand NMEA2000 and what is needed to make products work correctly together.
With Digtial Yacht's large range of AIS, often the first add-on device to make a boat owner think about NMEA2000, we are regularly asked “what do I need to make it work?” This prompted Digital Yacht to create a cost effective and smart NMEA2000 Starter Kit that is ideal for smaller boats but can also be easily expanded in the future.
There are other starter kits on the market, but none offer three device connection, metal connectors and a smart 4-Way T-Piece at such a good price.
By utilizing the NMEA2000 standard “Micro C” type connectors, users can easily add and expand to this Starter Kit as their installation grows or simply buy two or more kits for a larger install, still cheaper than buying the parts separately.
Features:
Everything you need in one box
Smart 4-Way T-Piece “Backbone”
1M (3') Power Cable with in-line fuse
1M (3') “Drop Cable”
Pair of removable network terminators
Allows three devices to be connected
Standard “Micro C” connectors make it very easy for future network expansion
Metal connectors and reduced T-Piece connections, improve reliability
|
100.75 |
|
|
Solar Starter Cable Kit
Xantrex's Solar Starter Cable Kit provides weather-resistant, certified cables for connecting a solar panel to a charge controller, and from the charge controller to the battery.
Features:
Designed to connect a PV array to a charge controller and battery
Weather-resistant and certified cables
PV and battery cables both have built-in ferrule terminations for quick connections to the charge controller
Battery cables have built-in fuse and ring terminals
In the Box:
(1) Pair of (black/red) 20-foot MC4-type PV cables
(1) Pair of (black/red) 10-foot MC4-type battery cables
Built-in 30A DC ATC fuse on the red cable
|
115.26 |
|