External Speaker - Black Features: 4x4 inch external speaker, same as supplied Input impedance: 4 ohms Max input power: 7 Watts

10W Amplified External Speaker - Black  Redesigned for clear, crisp, and audible reception, the Standard Horizon MLS-410PA is setting the bar on external speakers.  With 10 Watts of amplification built in, this compact high-performance communications speaker matches the impedance and output requirements of most Standard Horizon transceivers.  Compatible With: Standard Horizon VLH-3000A and older models, GX2000/2150/2200/1700/1600 Features: Flush or bracket mounted Compact size Weather-resistant  Technical Specifications: Speaker Cable Length - 6.5' (2 M) Dimensions (Diameter) - 5" Maximum Power - 10 Watts Speaker Impedance - 8 Ohm In the Box: Speaker w/speaker wire Mounting bracket Instruction manual *Sold as an Individual 

External Speaker f/M412 5W external speaker with 3.5mm speaker jack and 2M cable

MLS-410 Fixed Mount Speaker - Black  Redesigned for clear, crisp, and audible reception, the Standard Horizon MLS-410 is setting the bar on external VHF speakers. Compact in size, this high-performance communications speaker matches the impedance and output requirements of most Standard Horizon transceivers.  Compatible With: Standard Horizon fixed mount VHF radios/Transceiver  Features: Flush or bracket mounted Compact size Weather resistant  Technical Specifications: Speaker Cable Length - 6.5' (2 M) Dimensions (Diameter) - 5" Maximum Power - 10 Watts Speaker Impedance - 4 Ohm In the Box: Speaker w/speaker wire Mounting bracket Instruction manual *Sold as an Individual

R1 6.5" x 6.5" Vamp Spin Tower Speakers - Black - 160W RMS & 320W Peak Power Roswell took the classic Vamp Spin speaker off the shelves for a season or two to reintroduce a new look. With 11 different speaker positions and the new 360 Clamp, users can get the music right where they want it. ENJOY! Features: Klippel® tested and certified to guarantee acoustic performance Two R1 6.5" component-style speakers    Coaxially mounted 1" silk dome tweeter Patented speaker spin technology allows the 6.5" speaker to spin 180 degrees   Concealed integrated 12 dB/oct crossover network Integrated RGB LED backlight the cone to create your desired visual atmosphere   Machined billet Roswell 360º 3" Universal Clamp with 1.90", 2.375, and 3" adapters Deutsch wiring harness included for water-tight connection Specifications: Color: Black Continuous Power (RMS): 160 Watts Peak Power (RMS): 320 Watts Sensitivity: 90 dB @ 1W/1M Frequency Response (+ / - 3 dB): 60Hz - 20kHz Impedance Ω: 2Ω Dimensions: Spin & Mounted Speaker Diameter: 6.5 in. I 16.51 cm Total Width: 16.40 in. I 41.64 cm  Total Depth: 9.063 in. I 23.02 cm Total Height: 13.575 in. 23.02 cm Hanging Distance (from center to lowest point): 12.26 in. I 31.93 cm *Sold as a Pair

FM-F65RB FM Series 6.5" Flush Mount Round Marine Speakers - Black Grill - 120W Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends. Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish. With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season. Enhanced Design Aesthetics The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues. Innovative Flush Mount Design The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker. The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel. The True-Marine™ Standard As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty. IP65 Weatherproof Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Designed To Comply With ISO12216 The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality. Features: Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes. Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel. Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel. True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation. Designed To Comply With ISO12216: Tested to international standards for pressure and water tightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness. Specifications: Speaker Size: 6.5" Peak Power: 120W RMS Power Rating: 30W Efficiency (1W/1M): 87 dB Frequency Response: 100 Hz - 18 kHz Nominal Impedance: 4 Ohms Recommended Amplifier Power (RMS): 15-80W/Ch Tweeter Type: Aluminum Dome Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 138mm (5-7/16") Mounting Depth Clearance: 70mm (2-3/4") Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 4L Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 3 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FM-65SB FM Series 6.5" 120 Flush Mount Square Marine Speakers - Black Grill - 120W Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends. Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish. With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season. Enhanced Design Aesthetics The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues. Innovative Flush Mount Design The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker. The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel. The True-Marine™ Standard As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty. IP65 Weatherproof Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Designed To Comply With ISO12216 The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality. Features: Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes. Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel. Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel. True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation. Designed To Comply With ISO12216: Tested to international standards for pressure and water tightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness. Specifications: Speaker Size: 6.5" Peak Power: 120W RMS Power Rating: 30W Efficiency (1W/1M): 87 dB Frequency Response: 100 Hz - 18 kHz Nominal Impedance: 4 Ohms Recommended Amplifier Power (RMS): 15-80W/Ch Tweeter Type: Aluminum Dome Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 138mm x 138mm (5-7/16" x 5-7/16") Mounting Depth Clearance: 70mm (2-3/4") Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 4L Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 3 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FM-F77RB FM Series 7.7" Flush Mount Round Marine Speakers - Black Grill - 200W Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends. Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish. With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season. Enhanced Design Aesthetics The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues. Innovative Flush Mount Design The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker. The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel. The True-Marine™ Standard As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty. IP65 Weatherproof Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Designed To Comply With ISO12216 The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality. Features: Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes. Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel. Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel. True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation. Designed To Comply With ISO12216: Tested to international standards for pressure and watertightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness. Specifications: Speaker Size: 7.7" Peak Power: 200W RMS Power Rating: 50W Efficiency (1W/1M): 91 dB Frequency Response: 80 Hz - 18 kHz Nominal Impedance: 4 Ohms Recommended Amplifier Power (RMS): 20-150W/Ch Tweeter Type: Aluminum Dome Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 165mm (6-1/2") Mounting Depth Clearance: 83mm (3-1/4") Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 8L Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 3 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FM-F77RB FM Series 7.7" Flush Mount Square Marine Speakers - Black Grill - 200W Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends. Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish. With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season. Enhanced Design Aesthetics The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues. Innovative Flush Mount Design The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker. The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel. The True-Marine™ Standard As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty. IP65 Weatherproof Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Designed To Comply With ISO12216 The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality. Features: Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes. Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel. Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel. True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation. Designed To Comply With ISO12216: Tested to international standards for pressure and watertightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness. Specifications: Speaker Size: 7.7" Peak Power: 200W RMS Power Rating: 50W Efficiency (1W/1M): 91 dB Frequency Response: 80 Hz - 18 kHz Nominal Impedance: 4 Ohms Recommended Amplifier Power (RMS): 20-150W/Ch Tweeter Type: Aluminum Dome Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 165mm x 165mm (6-1/2" x 6-1/2") Mounting Depth Clearance: 83mm (3-1/4") Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 8L Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 3 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

R1 8" x 6.5" Vamp Spin Tower Speakers - Black - 160W RMS & 320W Peak Power Roswell’s patented vamp spin technology is supercharged with the R1 audio series, giving users 360 degrees of premium sound-sending freedom. This versatile combination pairs our R1 8" and R1 6.5" together to keep the party cranking from the front to the back, on the sandbar, and beyond. Features: Klippel® tested and certified to guarantee acoustic performance R1 8” & R1 6.5” component-style speakers    Coaxially mounted 1" silk dome tweeter Patented speaker spin technology allows the 6.5" speaker to spin 180 degrees   Concealed integrated 12 dB/oct crossover network Integrated RGB LED backlight the cone to create your desired visual atmosphere   Machined billet Roswell 360º 3" Universal Clamp with 1.90", 2.375, and 3" adapters Deutsch wiring harness included for water-tight connection Specifications: Color: Black Continuous Power (RMS): 160 Watts Peak Power (RMS): 320 Watts Sensitivity: 90 dB @ 1W/1M Frequency Response (+ / - 3 dB): 50Hz - 20kHz Impedance Ω: 2Ω Dimensions: Diameter: Spin Speaker: 6.5 in. I 16.51 cm / Mounted Speaker: 8 in | 20.32 Total Width: 19.30 in. I 49.0 cm  Total Depth: 13.575 in. 34.5 cm Hanging Distance (from center to lowest point): 12.26 in. I 31.93 cm *Sold as a Pair

SM-F65CB SM Series 6.5" Shallow Mount Square Speakers - Black Cloth Grill - 100W Unique shallow mount design without compromising on sound quality. Fusion's SM Series shallow mount speakers, designed for installations where mounting depth is limited without compromising on sound quality and performance. The SM Series speakers are engineered with a sealed, perfectly-tuned enclosure to deliver quality audio reproduction that normally could not be achieved from the limitations of shallow mounting depths. Available in two colors (black or white), the SM Series speakers are a stylish addition to your vessel with its clean aesthetics and unique shallow mount form factor. Quality Audio Reproduction with Unique Shallow Mount Design The SM Series speakers solves the age-old problem of achieving quality audio reproduction from the limitations of shallow mounting depths often required in many installations. By engineering a tuned, sealed enclosure into the back of the speaker, it eliminates the need to have sufficient volume behind the speaker for quality audio reproduction. This makes the SM Series speakers capable of producing high-quality sound even with one of the most restrictive mounting depths of only 24mm [15/16"], allowing them to be installed in areas many other speakers will not fit, such as cabinets. Versatile Mounting Solutions The SM Series has two optional accessory mounting spacers to support installations in various positions. IP65 Weatherproof The SM Series speakers are designed for the harsh marine environment and are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Features: Shallow Basket Design - With a shallow mounting depth of only 24mm [15/16"], the SM Series speakers are ideal for installation where mounting depth is limited. Tuned, Sealed Enclosure Design - Protects the speakers' components from damage and ensures quality audio reproduction is delivered that normally could not be achieved by a speaker with such a shallow design. Retrofittable - The SM Series speakers have a circular back with a mounting diameter clearance of 130mm [5-1/8"], allowing it to fit easily into existing 6.5" speaker cutouts. Aesthetic Interior Design - Designed with aesthetics in mind, the SM Series come with a high-end acoustic fabric grille and feature rounded edges and contour cues to add style to your vessel. IP65 Weatherproof - The SM Series speakers are rated IP65 for protection against dust and water ingress in the harsh marine environment. Specifications: Cloth Grill cover Speaker Enclosure Size: 155mm x 155mm [6-1/8" x 6-1/8"]  Peak Power: 100W Driver Size: Tuned and optimized 3" Efficiency (1W/1M): 84 dB Frequency Response: 150 Hz - 20 kHz Nominal Impedance: 4 Ohms Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 130mm (5-1/8") Mounting Depth Clearance: 24mm (15/16") Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 1 Year WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

10W Amplified External Speaker - White Redesigned for clear, crisp, and audible reception, the Standard Horizon MLS-410PA is setting the bar on external speakers.  With 10 Watts of amplification built in, this compact high-performance communications speaker matches the impedance and output requirements of most Standard Horizon transceivers.  Compatible With: Standard Horizon VLH-3000A and older models, GX2000/2150/2200/1700/1600 Features: Flush or bracket mounted Compact size Weather-resistant  Technical Specifications: Speaker Cable Length - 6.5' (2 M) Dimensions (Diameter) - 5" Maximum Power - 10 Watts Speaker Impedance - 8 Ohm In the Box: Speaker w/speaker wire Mounting bracket Instruction manual *Sold as an Individual 

HYDRO 8" Marine Tower Speakers with RGB LED Lights & Pro Audio Loudspeakers - Black The NXL-X8PRO is DS18’s revamped compact wakeboard tower speaker designed to turn your sound system's volume ALL THE WAY UP! The new and improved clamping system these models come equipped with paired with their compact size makes it possible for these tower speakers to be installed just about anywhere. This upgraded model of the NXL-X8 comes equipped with a Pro Audio Water Resistant Hybrid Mid-Range & Compression Driver Loudspeaker, the PRO-HY8.4B, for an expansive range of frequencies that get as high as 20KHz and as low as 80Hz. The neodymium magnets installed in the PRO-HY8.4B’s compression driver reinforce the motor/cone assembly providing these tower pods with unbreakable strength and durability. The NXL-X8PRO has a larger voice coil with a higher potential for loudness over the standard NXL complete pods which also adds great sound reproduction and extended longevity. The power handling ratings on these pods are 250W RMS and 500W MAX, which is double the standard NXL pod rating. These tower speakers also have integrated RGB LED Lighting to complement the vibe of any system. The LED BTC (LED Bluetooth Controller) is sold separately and required to control the lights on this speaker. The NXL-X8PRO is an unbreakable volume-maximizing tower speaker that’s guaranteed to revitalize any sound system. Features: DS18 hydro series 8" tower speaker with built-in hybrid mid-range & compression driver to blast the competition's audio away. Enhanced durability and power handling for a tower speaker with unmatched longevity Pair the NBR pad with a 1” to 2” tube to help get the best fitment for your tower size Camps for 1” to 2” roll cage or tube Two CS8 silicone marine speaker covers included for added protection The front logo and back covers can be rotated for correct angle display RGB led system designed throughout the pod, so you see lighting on the speaker ring, and pod housing Great For: Marine audio ATV audio UTV audio Jeep audio Off-road audio DIY projects Specifications: Color: Matte black Nominal Diameter: 8 in. / 203mm Nominal Impedance: 4 Ohms RMS Power Handling: 250W MAX Power Handling: 500W Sensitivity (1w/1m): 97dB Frequency Response: 80Hz - 20KHz Recommended HI Pass Crossover: 100Hz Measurement: Overall Diameter: 8.6 in. / 218mm Overall Depth: 9.4 in. / 238mm Overall Height: 12.3 in. / 313mm

R1 Pro Tower Speakers - Black - 200W RMS & 400W Peak Power Discover a new age of audio with the revolutionary, patented Roswell R1 Pro Tower Speakers. Featuring the world’s first RGB LED light-permeable speaker housing, this award-winning innovation consumes your senses with unmatched acoustic clarity in a place where imagination meets sound. The R1 Pro is a mission accomplished in developing the flagship of the R1 Audio line to introduce an entirely new listening experience on the water. Features: Klippel® tested and certified to guarantee acoustic performance R1 Pro 8" woofer Side-mounted  1" compression tweeter with integrated protection circuit     Deutsch wiring harness included for water-tight connection Machined billet Roswell 360º 3" Universal Clamp with 1.90", 2.375" and 3" adapters The integrated RGB LED backlit grille helps to create your desired visual atmosphere  Extreme saltwater and UV resistance Specifications: Color: Black Continuous Power (RMS): 200 Watts Peak Power (RMS): 400 Watts Sensitivity: 8" Woofer: 95 dB @ 1W/1M / 1" Compression Tweeter: 103 dB @ 1W/1M Frequency Response (+ / - 3 dB): 60Hz - 20kHz Impedance Ω: 4Ω Dimensions: Diameter: Speaker: 8 in. I 20.32 cm / Tweeter: 1 in. | 2.54 cm Total Width: 15.48 in. I 39.32 cm  Total Depth: 13.35 in. 33.91 cm Hanging Distance (from center to lowest point): 12.25 in. I 31.12 cm *Sold as a Pair

MB-21 8 Watt VHF Extension Speaker - Black This compact marine communications speaker includes a stainless steel mounting bracket and stainless steel grill.  These waterproof communication speakers can be mounted where you can hear your VHF radio. Features: Completely waterproof and corrosion-proof Features stainless steel grills, sturdy plastic frames, polypropylene speaker cones and Teflon-coated wires 10' Lead wire w/mini-plug and RCA adapter  Specifications: Peak Power Handling - 8 watts Continuous Power - 4 watts Speaker Impedance - 4 ohm Weight - 0.35 lbs per speaker Overall Dimensions - 2-15/16" x 2-3/4" x 1-5/16" (74mm x 69mm x 33mm) *Sold as a Single This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.