Standard Cam-Matic® Aluminum Cleat Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.  Specifications: Height: 30 mm / 1-3/16 in Length: 65 mm / 2-9/16 in Width: 32 mm / 1-1/4 in Weight: 71 g / 2.5 oz Minimum line: 3 mm / 1/8 in Maximum line:12 mm / 1/2 in Fastener spacing: 38 mm / 1-1/2 in Fasteners: 5 FH mm / 10 FH in Maximum working load: 136 kg / 300 lb Breaking load: 340 kg / 750 lb Pawls: Aluminum

Micro Cam-Matic Aluminum Cleat Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications: Height: 22mm / 7/8in. Length: 48mm / 1-7/8in. Width: 24mm / 15/16in. Weight: 26g / .93oz Minimum line: 2mm / 3/32in Maximum line: 6mm / 1/4in. Fastener spacing: 27mm / 1-1/16in. Fasteners: 4 RH mm / #8 RH in. Maximum working load: 91kg/ 200lb Breaking load: 181kg / 400lb Pawls: Aluminum

Micro Cam-Matic Aluminum Cleat Kit with Wire Fairlead Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes 468 Cam-Matic® and 475 wire fairlead. Specifications: Weight: 33g / 1.2oz Maximum working load: 91kg / 200lb

Standard Cam-Matic® Aluminum Kit with Wire Fairlead Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes hardcoat-anodized 150 aluminum Cam-Matic® and 298 wire fairlead. Specifications: Weight: 85g / 3 oz. Maximum working load: 136kg / 300lb.

40mm Carbo Air Pivoting Lead Block with Aluminum Cam-Matic® Cleat High-strength pivoting lead blocks with cams are used for halyard controls on larger keelboats and as “headknockers” on dinghies and beachcats for sheeting directly from the boom. Hole spacing and rivet size are the same as Classic models, making upgrades easy. Cam reverses for either up or down cleating. Can be used as becket block. Specifications: Sheave Ø (mm)40 mm Sheave Ø (in)1 9/16 in Maximum line Ø (mm)10 mm Maximum line Ø (in)3/8 in Maximum working load (kg)136 kg Maximum working load (lb)300 lb

4MP H.265 AI IP Dome Camera with IR - 2.8mm Fixed Lens & Junction Box Features: Supports up to 4MP @ 30fps Built-in standard PoE (IEEE 802.3af) H.265/H.264/MJPEG compression supported True Day/Night operation (IR cut filter) Adaptive IR LEDs reduce IR saturation IR range: Up to 98FT (depending on scene reflection) Micro SD slot up to 256GB (card not included) True WDR (wide dynamic range) operation IP67 compliant, weather resistant IK10 compliant, vandal resistant Junction box included (works with NPT/BSP specifications) Conformant with ONVIF Profile T 5-year warranty UL Listed NDAA Compliant Technical Specifications: Power - DC Jack Maximum Resolution - 2592 x 1520 Field of View - 95.3°(H) , 53.2°(V), 115°(D) White Balance - Auto, Indoor, Outdoor, Manual Operating Temperature - -40°F 140°F Unit Dimensions - 4.7” (Dia.) x 3.5” (H)  Unit Weight - 1.43 lb

Standard Carbo-Cam® Cleat Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for racing where weight is critical, or where adjustments are less frequent.  Specifications: Height: 30mm / 1-3/16in. Length: 65mm / 2-9/16in. Width: 32mm / 1-1/4in Weight: 42g / 1.44oz Minimum line: 3mm / 1/8in Maximum line: 10mm / 3/8in Fastener spacing: 38mm / 1-1/2in Fasteners: 5 FH mm / #10 FH in Maximum working load: 91kg/ 200lb Breaking load: 227kg / 500lb Pawls: Plastic carbon-matrix

Standard Carbo-Cam® Kit with Wire Fairlead Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes lightweight, fiber-reinforced 326 Carbo Cam and 298 wire fairlead. Specifications: Weight: 54g / 2 oz. Maximum working load: 91kg / 200lb.

Micro Standard Carbo-Cam Base with Bullseye Micro Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base. Specifications: Height: 33mm/1-5/16in Weight: 85g/3oz Minimum line: 3mm / 1/8in Maximum line: 10mm / 3/8in Fastener spacing: 27mm / 1-1/16in Fasteners: 5 FH mm / #10 FH in Maximum working load: 91kg/ 200lb

Aluminum-S-Cleats These Aluminum-S-Cleat come in sizes to fit all boats. Pick from 10", 12", 15", or 18" S cleats   Made from 356 Corrosion-Resistant cast Aluminum these S Cleats are built to withstand the harshest marine environments. No matter the conditions you can trust these cleats. There is also a 10 year warranty on them.

Multi-Purpose 15° Portable Cleat We've combined a cleat and a fender holder into one glorious accessory with our Multi-Purpose Portable Deck Cleat! Securely tie off lines and set fenders all in one place. Because it fits standard rod holders, this cleat is movable, stowable and a practical step forward in your boating and docking experience. Features: Large S-shape 9-inch cleat design Accommodates up to ¾-inch dock line for larger boat applications Pipe diameter of 1-1/2-inch fits into standard rod holders 1-5/8-inch in diameter Loop hole design to hang fenders over the side Ideal for hanging hose while washing boat Packaged in mesh bag for easy drying if stored wet and to avoid scratching deck or storage surfaces on the boat 1-year limited warranty

Add-A-Cleat A versatile cleat easily mounts to a stanchion or rail 7/8" and 1" diameter ( will accommodate larger sizes with longer clamp). Construction consists of a husky Stainless Steel bracket and clamp with a 4-1/2" nylon coated aluminum cleat. Use them for fenders and flag halyards. Installation is easily made with a screwdriver. 

Midrange Single with Aluminum Sheave Block Midrange blocks’ robust construction makes them ideal to handle the high loads found on medium and large offshore boats. Sheave runs exclusively on a ball bearing system for fast trim and release under any load. Features:  Sheave: 76mm/3" Maximum Line: 14mm/9/16" Max Working Load: 1270kg/2800lbs

Sherwood H-10 CRUSADER 97512 Pump Body: Bronze Ports: 1" Hose Cam: Full Impeller: Neoprene Shaft Seal: Mechanical Drive: Bracket Mount Pulley Drive This H10 Crusader Chevy V6 97512 pump is made at time of order. The H-10 pumps have been discontinued. We make these pumps from a Sherwood G-30-2B and a shaft hub that is correct for the Crusader.  

Major Rebuild Kit for Sherwood H-10 This kit contains the following items   MS DATA SHEET 1 DATA SHEET SH 10515C 1 SCREW & WASHER SH 12211 2 BALL BEARING SH 12231 1 O'RING SH 12710 3 LOCKWASHER SH 12855 1 GASKET SH 12857 3 SCREW SH 12859 1 SEAL/SEAT ASSEMBLY SH 15883 1 CAM BRASS SH 25150 1 WEAR PLATE SH 4258 3 SNAP RING (SMALL) SH 4259 2 SNAP RING (LARGE) SH 4264 1 WASHER SH 4432 1 KEY SH 5133 1 SPACER SH 9959K 1 IMPELLER KIT     Kits are put together at time of order