FishTrax™ Adjustable Mounting Bracket with Suction Cup Utilizing the TraxMount FishTrax™ adjustable mounting bracket with suction cup you can easily mount your FishTrax™ fish finder to any flat surface on your kayak, small boat or canoe.  Combine it with a TraxMount Weighted Display Mount Pad or TraxMount Mounting Disk to maximize usability. Compatible with:  FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C *Sold as an Individual

ROKK Mini Tablet Mount Kit with Suction Cup Base The hi-performance system allows users to suction a tablet to any rigid, clean, smooth, non-textured surface. The 360-degree aluminum body features a metal-on-metal locking system that multiplies the clamping efforts to achieve 100% locking force. The tablet will never move unless the user wants it to. Features: Engineered better for longer-lasting grip Tablet Clamp Top Plate Secure mount for mini and full-size tablets – ratchet adjustable Fits devices from 125mm to 220mm (5-8¼”) 360 Degree Body  Install devices instantly onboard. With one reassuring click, tech is both secured and released A metal-on-metal locking system multiplies clamping efforts to achieve 100% locking force. Electronics will never move until you want them to Suction Cup Base  Fits to any rigid, clean, smooth, non-textured surface* Tough, marine-grade, UV-stable materials Mounts quickly with over-center locking arm (no tools required) Safety lock prevents accidental release when the ROKK Mini adjustable body is attached

FishTrax™ Transom Mount Transducer  The FishTrax transom mount transducer allows high-speed, on-plane operation of all FishTrax fish finders.  Compatible with: FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C In the box: Transom mount transducer w/30' cable  Transom mount bracket w/mounting hardware Instruction manual *Sold as an Individual 

Heavy-Duty Transom Mount Bracket w/Spray Shield Mount the transducer on the transom of your boat so it remains in the water at all times to provide excellent sonar returns.  Bracket can be adjusted to allow the angle of the transducer to be parallel with the water surface. The spray shield blocks excessive water from spraying off the transducer when the boat is running at high speeds.  Creates minimal drag on the boat. Compatible with: 4-Pin, 8-Pin or 12-Pin scanning transducers WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Standard Upper Mounting Bracket w/Gland Seal   VANDAR - (3 screw, 1 wire) (2008-Present) Specifications Lenco Part #: 15085-001 (Original Part #116) System Type: Single or Dual Actuator Compatibility: Any Boat WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

FishTrax™ Suction Cup Transducer Mounting Bracket The FishTrax™ Suction Cup Transducer Mount easily attaches the standard FishTrax™ transducer to any hull for optimal performance.  Click and go for easy installation and removal on any vessel.    *Transducer not included Compatible with: FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C In the Box: Suction Cup with Lock Tab Stainless Steel Bolt & Thumb Nut Stainless Steel Lock Washers *Sold as an Individual

FishTrax™ Display Mounting Disc The TraxMount Suction Cup Mounting Disk is an adhesive pad disc that allows you to stick it to any surface and attach any FishTrax or TraxMount accessory that incorporates a suction cup.   No tools are required to install - simply clean the surface and stick to the surface using the strong adhesive base.  Compatible with: TraxMount suction cup display mount FishTrax™ suction cup transducer mount FishTrax™ IceShack enclosure In the Box: Suction Cup Mounting Disk 3M® Adhesive Backing *Sold as an Individual

FishTrax™ Strap Mount Attaches any FishTrax Fish Finder and transducer to a float tube, kayak or canoe.   Integrated adjustable strap with quick release buckle, allows for easy installation and removal. It can also be used to attach a GoPro Camera or any Camera with a female 1/4 x 20 thread pattern.  The strap mount is adjustable to 48" so it can also be mounted on kayaks and canoes as well.    Compatible with: FishTrax™ 1, 1X and 1C fish finders   In the Box: FishTrax Strap Mount TraxNut Display Mount Adjustable Strap (48') with Quick Release Buckle Transducer Mount Thumb Screw Hardware *Sold as an Individual 

FishTrax™ 1C Fish Finder w/HD Color Display Introducing the world’s most versatile fish finder.  This powerful, handheld unit uses SONAR technology to locate fish depth and measure water temperature & bottom contour.   Use it on a motorboat, kayak, or even on the ice in winter. Features: 2” HD Color Display Waterproof Housing Easy-to-use menu options and settings.  Designed by fishermen, for fishing enthusiasts of all experience levels. Use automatic mode for quick and easy setup, or dial in precise readings with manual mode. Ice Mode Digital Flasher allows precise jig depth readings while ice fishing. Programmable audible alarms let you know when fish are present, or a desired depth has been measured.  VariableZone Temperature Sensor measures water temperature throughout the water column for species pinpointing. Polarized LCD for glare-free viewing Technical Specifications: Dimensions (H x W x D)  6" x 3" x 2" (153 x 77 x 51mm) Screen Size (H x W) -  2" x 1.6" (50 x 40mm) Operating Temperature - 0 to 160°F  (-18 to 71 °c) Depth Range -  1.5' to 240 ft (.5 to 75 M) Transducer Cable Length - 15' (4.5 m) Transducer Frequency - Dual 200/83 kHz Transducer Beam Angle - Dual 14/26° Power - four (4) AAA Batteries In the Box: FishTrax™ 1C fish finder Transducer w/15' cable *Sold as an Individual 

FishTrax™ Transducer Mount The FishTrax transducer mount provides a universal transducer mounting option for sup's, paddleboards, kayaks canoes and small boats.   This solution enables the quick and effective mounting and removal of your transducer.  Compatible with: FishTrax 1 FishTrax 1X FishTrax 1C In the Box: ABS Plastic Transducer Mount Stainless Steel Bolt and Wing Nut Instruction manual  *Sold as an Individual

RAM Dual Articulating Suction Cup Base with 1" Ball Base RAM Suction Cups are regarded as one of the most impressive suction cups in the world. Their incredible holding power is surprising when considering how most suction cups function. When two suction cups are used together the performance is amazing. The RAM Dual Articulating Suction Cup is an amazing innovation in suction cup mounting. With the ability to independently articulate each suction cup, this mounting base can be used in a variety of applications such as curved windows and surfaces. Whether you are mounting to a curved surface on a vehicle, or a curved windshield, this product is the ideal solution for secure suction cup mounting. Features: Customize mounting position for convex and concave surfaces by repositioning suction cup bases Dual suction cups provide extra strength and stability for devices up to 5 lbs. Commercial grade product for unparalleled performance Dual suction cups for redundancy High strength materials maximize longevity of the mount Ball and socket mounting system offers ease of adjustment product adjustment Lifetime warranty Made in U.S.A. Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Double Suction Cup Base RAM suction cups are regarded as one of the most impressive suction cups in the world. The incredible holding power is surprising when considering how most suction cups function. When two suction cups are used together the performance is amazing. The RAM Double Suction Cup Base is an amazing innovation in suction cup mounting. Features: Double Suction Cup Base Dual Suction Cups provide extra strength and stability Dual Suction Cups for redundancy High strength materials maximize longevity of the mount Made in the U.S.A.

Twist-Lock™ Suction Cup Mount with EZY-Mount™ Quick Release Adapter This single suction cup mount (RAM-B-166-326U) was designed in collaboration with OtterBox Hardline Series for industrial applications. This kit includes a B-size RAM® Twist-Lock™ suction cup base, a medium-length socket arm, and a RAM® EZY-Mount™ Quick Release Adapter for OtterBox Hardline Series. With the quick-release tab, simply push the tab to dismount the tablet without having to adjust the mount itself. The RAM-B-224-1U suction cup base consists of a 3.3" diameter RAM® Twist-Lock™ suction cup connected to a RAM-B-238U diamond base with a 1" B-size rubber ball. The RAM® Twist-Lock™ suction cup base is a fan favorite for use on vehicle windshields and provides an extra-strong hold on any smooth, non-porous surface. Features: RAM® Twist-Lock™ suction cup base is ideal for vehicle windshields and other nonporous surfaces includes a B-size medium-length socket arm and RAM® EZY-Mount™ Quick Release Adapter for OtterBox Hardline Series Quick-release adapter with release tab for easy docking and removal of devices wrapped in an OtterBox Hardline Series case Backed by a lifetime warranty Specifications: Hardware Included: Assembly hardware Suction Size (inch) 3.3” diameter  Socket to Socket Length (inch): 3” Hole Pattern (inch):  2-Hole AMPS: 1.912” Ball Size (inch): B size (1”) Weight Capacity: The standard use is 2.0 lb. and the heavy-duty use is 1 lb. Materials: Marine-grade aluminum, high-strength composite, and cast acrylic Weight: 0.75 lb.

Straight Double Suction Cup Base RAM suction cups are regarded as one of the most impressive suction cups in the world. The incredible holding power is surprising when considering how most suction cups function. When two suction cups are used together the performance is amazing. The RAM Straight Double Suction Cup Base is an amazing innovation in suction cup mounting. Features: Straight Double Suction Cup Base Dual Suction Cups provide extra strength and stability Dual Suction Cups for redundancy High strength materials maximize longevity of the mount Made in the U.S.A.

RAM 3.3" Diameter Suction Cup Base with Twist Lock The RAP-224-1U, suction cup twist lock base contains a standard RAM double hole diamond shaped end. The 3.3" diameter suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass surface. The diamond shaped end has two holes 1.912" from center to center. This will connect to RAM-B-238 Diamond Plates Series, the universal industry standard AMPS hole pattern or directly to the back of the RAM Composite HOL Cradles. This suction base DOES NOT have a RAM 1" rubber connection ball. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size