|
4-Way Nylon Heavy-Duty Ratchet Mount with Cable Slot & Built-In Coax Cable Feed-Thru 1"-14 Thread
4 way ratchet mount in reinforced nylon UV resistant design with handle for deck or bulkhead. Hole for GPS and feed-thru for coax cable. Usable with antennas no longer than 9' in self supporting mode. Standard 1" x 14 thread.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.79 |
|
|
Shakespeare Style 4187-HD
EXTRA HEAVY-DUTY RATCHET MOUNT STAINLESS STEEL
Versatile four-way ratchet design for deck or side mounting. Quick-action handle makes operation easy. Standard 1"-14 thread. The Style 4187-HD adds extra strength and rigidity.
Use wherever its extra heavy-duty construction is needed. Standard 1"-14 thread.
9/32" hole for cable feed-through
Bolt holes: 5/16" dia., 3" x 1-1/2" on center
|
53.56 |
|
|
RAM Heavy Duty Electronics Mount w/3" x 11" Base & 3-3/4" Base
Part #: RAM-E-111U
The included plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications, additional holes may need to be drilled for proper fit with your electronic device.
Ball Size: 3.38" Rubber Ball
Material: Powder Coated Marine
Color:Black Poweder Coat
|
271.79 |
|
|
Fixed Antenna Base 4-1/4" Size with 1"-14 Thread Formed 304 Stainless Steel
Fixed Antenna Base features a flange mount base. Designed to allow wire to feed directly through the base, eliminating the need for a separate cable grommet. Accepts any standard antenna with 1"-14 threads, but is ideal for TV, Loran, GPS, and VHF antennas. Constructed of corrosion resistant formed 304 stainless steel. Installs with three 1/4” RH fasteners (not included).
|
13.62 |
|
|
LTB Top Standard 1"-14 Thread for GPS or Wind Transducer
Adapter to mount a GPS unit or wind transducer. Uses standard 1"-14 threads.
|
17.28 |
|
|
Starlink Modular Top Plate with Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel Base
Starlink quick-release top plate for Seaview "M1" and "M2" style mounts.
Features:
316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate
The top of the adapter is machined to fit the Starlink antenna post
The adapter with the fixed base and modular plate is 4 1/4” tall
The ¼” aluminum plate is powder-coated white and can accommodate a Seaview light bar
|
288.00 |
|
|
Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel Ratchet Base
Features:
316L stainless steel Starlink adapter with a 1"-14 threaded ratchet base
The bottom of the adapter has 1”-14 threads with setscrew to lock in place
The top of the adapter is machined to fit the Starlink antenna post
The overall height is 7-1/2” (adapter with the ratchet base).
Base measures 2-1/2" x 3-9/16" with 4 holes for 1/4” bolts
Mount has a 3/8" hole for cable pass-through
|
240.00 |
|
|
Swivel Base Rod Holders
RH570XL
Stainless Steel Side Mount w/ Swivel Base Extra Long
This holder is 4" longer than the standard length allowing the bent butt to sit deeper in the holder thus reducing the leverage and stress on the mounting surface.
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.
|
230.77 |
|
|
Quick Connect Nylon Mount with Cable for Quick Connect Antenna
Nylon Ratchet Mount with Cable for Quick Connect Series Antennas.
|
38.71 |
|
|
Heavy-Duty Ratchet Trailer Tie-Down - 2" x 3' - Pair
This heavy duty 2” x 3' ratchet tie-down is ideal for medium to large runabouts, pontoons or cuddy cabins. It features American made heavy vinyl coated top hook and zinc plated bottom hook. 2,400 lb. capacity - sold in pairs.
|
41.44 |
|
|
Heavy-Duty Ratchet Trailer Tie-Down - 2" x 5' - Pair
This heavy duty 2” x 5' ratchet tie-down is ideal for medium to large runabouts, pontoons or cuddy cabins. It features American made heavy vinyl coated top hook and zinc plated bottom hook. 2,400 lb. capacity - sold in pairs.
|
42.13 |
|
|
Quick Connect SS Mount with Cable for Quick Connect Antenna
Stainless Steel Ratchet Mount with Cable for Quick Connect Series Antennas.
|
69.70 |
|
|
Heavy-Duty Ratchet Antenna Mount - 316 Stainless Steel
Features:
316 stainless steel construction
Lay-down handle quickly loosens the ratchet for a fast, easy antenna drop
Features standard 1”-14 male thread mount with a hole for a Loran cable
The lightweight mount may be used self-supporting with an antenna up to 15’ long
Both mounts feature two ratchets for both up/down and side-to-side adjustments
Flat base for deck mounting
Base dimensions: 3½” x 2½”
|
78.41 |
|
|
8 to 4/0 AWG Heavy-Duty Hex Lug & Terminal Crimper
This crimper uses revolving dies to create a hex style crimp for 8 AWG to 4/0 AWG
Length 24.4" (62 cm)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
231.16 |
|
|
3/4" x 50' Heavy Duty PVC Bilge & Livewell Hose (FDA) - Clear with Black Helix
Trident Smooth extra heavy wall vinyl (FDA) well hose. All clear (see thru) with black helix. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs are required.
Features:
Flexible, but the 147 series is less flexible than the 149 series of hoses
Application:
Bilge and live well hose
Specifications:
Tube & Cover: Clear vinyl reinforced with black helix
Color: Clear with black helix
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-49°C)
Boxed: 50ft. / (15.24m)
Inner Diameter: (inch) 3/4" / (mm) 19
Outer Diameter: (inch) 0.968" / (mm) 24.6
Working Pressure: (Psi Vac In./Hg) 28
Weight: (Lb./ 50 ft.) 11 / (Kg/m) 0.33
Bend Radius: (inch) 2.25" / (mm) 57.2
*Burst Pressure is 4 x Working Pressure
|
88.32 |
|