Deck Mount Stabilizer Kit Use this to stabilize your Force® Kraken Trolling motor when in the stowed position.

MKA-50 Bow-Mount Stabilizer Kit for Fortrex Features: Reduces motor bouncing when in stowed position Attaches to the left or right side of bowguard Pivots into vertical position and rests on the boat deck when motor is stowed Rotates in the horizontal position with bowguard when the motor is deployed Includes rubber bumper to protect deck finish Stainless steel hardware tested for saltwater use Fits any Fortrex or Riptide SF bow-mount trolling motor WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MKA-60 Stabilizer Kit Reduces bounce on bow-mount trolling motors. Equipped with a low profile mounting base that allows the stabilizer to be easily removed. The pivoting arm can be folded down when not in use. Features: Reduces motor bounce in the stowed position Absorb vibrations to protect the motor shaft Folds down when not in use Multiple mounting orientations to fit your boat configuration Easily removable, it leaves only a low-profile base Stabilizer shafts can be cut to fit Multi-position strap adjusts to accommodate all shaft sizes Includes Stainless steel mounting hardware Compatible with the QUEST series RT Instinct, Ulterra, RT Terrova, Terrova, and Ulterra, Riptide Ulterra, Terrova, Riptide Terrova, Riptide ST, PowerDrive, Riptide PowerDrive, PowerDrive V2, Riptide SP, and PowerDrive Pontoon

Deck Mount 22.5° Angle Electronics Mount Secure most fishfinders and sonar/GPS up to 16 in. on most casting decks. Designed to mount over recessed trolling motor foot control pedals to more freely operate the pedal and free up deck space for rod butts. Features a 22.5° angled plate. Best suited for decks with less space forward of the foot pedal, allowing more aft foot clearance over the pedal. Fits most major electronics brands. Spans most recessed foot pedals. Powder-coated, marine-grade aluminum construction. Inside Span: 14.1 in. Features: Secure most fishfinders and sonar/GPS up to 16 in. on most casting decks Designed to mount over recessed trolling motor foot control pedals to more freely operate the pedal and free up deck space for rod butts Features a 22.5° angled plate Best suited for decks with less space forward of the foot pedal, allowing more aft foot clearance over the pedal Fits most major electronics brands, spans most recessed foot pedals

Antenna Under Deck Mount Mount your antenna under a fiberglass surface with this under deck mount. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Deck Mount Plate This adaptable 4" x 3" plate works with Cannon dual axis rod holders, pedestal mount tracks and downrigger pedestal mounts. Plates can be mounted in a variety of locations, and a protective mounting boot lets you avoid sharp edges. Includes mounting hardware

Float Tube Adapter 266 Mounting straps and brackets for use with No. 241 Combination Side/Deck Mount or 241L Locking Combination Side/Deck Mount These adjustable wrap-around straps are quick and easy to release from your float tube or pontoon boat Includes 2 brackets, 2 mounting straps and hardware (Combination Side/Deck Mounts not included) For use with No. 241 side/deck mount (No. 241 not included) WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Swivel Fishfinder Mount 269 Includes No. 241 Side/Deck Mount Uses the Scotty post mount design for quick removal and infinitely adjustable rotation. Fits or can be adapted to most fishfinder brands including Lowrance, Eagle Humminbird and Garmin. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

LightArmor Deck Mount Navigation Light - Black Composite - Port (red) - 2NM INTRODUCING LIGHTARMOR NAVIGATION LIGHTS, a new line of streamlined deck mount lights that meet today's global regulatory requirements, including EN/ISO 19009:2015.* LED Light Engine Cool to the touch Long lasting - 50,000+ hours Color indicated cores for ease of installation Be Safe, Be Seen Sharper cut-off angles and vibrant starboard and port colors for better visibility 2 NM U.S.C.G. Certified Corrosion Resistant Water-Resistant (IP Rating 67) Features tell-tale indicators for ease of use Smaller footprint with refined styling WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LightArmor Deck Mount Navigation Light - Black Composite - Starboard (green) - 2NM INTRODUCING LIGHTARMOR NAVIGATION LIGHTS, a new line of streamlined deck mount lights that meet today's global regulatory requirements, including EN/ISO 19009:2015.* LED Light Engine Cool to the touch Long lasting - 50,000+ hours Color indicated cores for ease of installation Be Safe, Be Seen Sharper cut-off angles and vibrant starboard and port colors for better visibility 2 NM U.S.C.G. Certified Corrosion Resistant Water-Resistant (IP Rating 67) Features tell-tale indicators for ease of use Smaller footprint with refined styling WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LightArmor Deck Mount Navigation Light - Stainless Steel - Port (red) - 2NM INTRODUCING LIGHTARMOR NAVIGATION LIGHTS, a new line of streamlined deck mount lights that meet today's global regulatory requirements, including EN/ISO 19009:2015.* LED Light Engine Cool to the touch Long lasting - 50,000+ hours Color indicated cores for ease of installation Be Safe, Be Seen Sharper cut-off angles and vibrant starboard and port colors for better visibility 2 NM U.S.C.G. Certified Corrosion Resistant Water-Resistant (IP Rating 67) Features tell-tale indicators for ease of use Smaller footprint with refined styling WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LightArmor Deck Mount Navigation Light - Stainless Steel - Starboard (green) - 2NM INTRODUCING LIGHTARMOR NAVIGATION LIGHTS, a new line of streamlined deck mount lights that meet today's global regulatory requirements, including EN/ISO 19009:2015.* LED Light Engine Cool to the touch Long lasting - 50,000+ hours Color indicated cores for ease of installation Be Safe, Be Seen Sharper cut-off angles and vibrant starboard and port colors for better visibility 2 NM U.S.C.G. Certified Corrosion Resistant Water-Resistant (IP Rating 67) Features tell-tale indicators for ease of use Smaller footprint with refined styling WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Deck Mount Flat Electronics Mount Secure most fishfinders and sonar/GPS up to 16 in. on most casting decks. Designed to mount over recessed trolling motor foot control pedals to more freely operate the pedal and free up deck space for rod butts. Fits most major electronics brands. Spans most recessed foot pedals. Powder-coated, marine-grade aluminum construction. Inside Span: 14.1 in. Features: Secure most fishfinders and sonar/GPS up to 16 in. on most casting decks Designed to mount over recessed trolling motor foot control pedals to more freely operate the pedal and free up deck space for rod butts Fits most major electronics brands Spans most recessed foot pedals Powder-coated, marine-grade aluminum construction

All-Round Deck Mount Light The Deck Mount Light has 7-inch leads for connection to a 12V DC power supply. Also, the bayonet lock secures the lens and cover to the base, providing easy lamp replacement. Light mounts flush, making it ideal for installation atop the tow piece on ski or wakeboard boat towers. Features: Includes a 9W wedge base lamp Installs directly to deck with two required #10 fasteners Deck mount   Black *Does not have a raised base 

ShadeFin Mini Deck Mount with Backing Plate Designed for boat decks, console tops, or any flat surface, the deck mount is a secure and permanent mounting option for ShadeFin Mini. When not in use, simply remove the ShadeFin Mini from the deck mount and stow. Features and Benefits: Includes six mounting screws for installation Powder-coated aluminum 6061 alloy Includes an injection-molded nylon cap Includes a backing plate and mounting hardware 3-year limited warranty Specifications: Finish: Powder coated, misty silver