ML-2 LED Combination Deck/Steaming Light This top selling light has been completely retooled to provide better access for bulb replacement. At the same time, the deck light/bulb assembly has been greatly improved with a prismatic reflector for enhanced deck illumination. Features: Steaming Light meets Coast Guard requirements for yachts up to 65' LOA Separate Switching 10 Watt Boy Light Bulb is easily replaceable (WN-211).8 amps Deck Light features identical to ML-1 Provided with 6” of triple-lead wire Weighs 7 oz – measure 5 ¾” vertically Molded body Available in black finish only Mast Light Chafe Guard will also work with Aqua Signal model 254047-7 combo light Replacement bottom ring for NL-1 & 2. Top bulb ML-2 Bottom Bulb ML-1 & 2. Top Clear Lens, ML-2 only.

ML-1 LED Spreader/Deck Light Forespar® now offers two mast light systems of superior quality. Model ML-1 is a deck light designed primarily for installation on the mast just below the spreaders. Model ML-2 is a combination deck-steaming light with separate switching, to be mounted on the forward part of the mast. The ML-1 and ML-2 lights feature a durable molded polymer housing assembly with a readily adaptable wraparound mounting apron to accommodate virtually any mast surface curvature. For 12V systems. Replacement bulbs are available from Forespar® and most marine dealers. Features: Lightweight Rugged Composite Material Adaptable to Mast Radius of Ease in Mounting 20W Adaptable to Mast Radius of Ease in Mounting 20W Easily Replaceable Halogen Type Bulb 1.4 amps Weighs 4 oz. – Measures 3-5/8” Vertically Provided with 6” of Twin-Lead Wire Molded Body Available in black finish only Replacement bottom ring for NL-1 & 2 Top bulb ML-2 Bottom Bulb ML-1 & 2. Top Clear Lens, ML-2 only. Protect your mast lights from sails and birds

Perko Combination Anchor/Steaming Light (50" Wire Length) Edson offers the 67500 Perko Combination Anchor/Steaming Light (50" Wire Length) that is specifically designed for Edson's Vision Series Light Arms. All-Round White Light with 12 volt bulb and is constructed of Black Polymer and Chrome Plated Zinc Alloy Top.  Certified For Use on Sail or Power Driven Vessels Under 20 Meters (65.6 ft.) in Length The 67500 Perko Combination Anchor/Steaming Light requires an Edson Light Arm that is secured to a Vision Series Base Mount with a Light Arm Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm Receiver,  Base Mount and Mounting Plate separately.

12V Converter Module for Perko LED Combination Masthead/Anchor Lights This module is designed to allow the installation of a Perko LED combination masthead/all round light as an upgrade to an existing incandescent combination masthead/all round light without rewiring the original incandescent switching arrangement of the boat navigation light system. Wiring Note:  Because direct wire-to-wire substitution of an older style incandescent light with this new style L.E.D. light will not work, there are two installation alternatives: Rewire the existing switch to match the diagram supplied in the L.E.D. light instructions or, Use the optional converter module (Cat. No 1680DP012V) and follow the wiring in the instructions provided with the new L.E.D. light so that no rewiring of the switch is necessary.

keywords: Golight, golight led lights, led lighting, led spotlight, led searchlight

Attwood LED 12V Combination Anchor/Streaming Light Edson offers the 67510 Attwood LED Anchor/Steaming Light (72" Wire Length) that is specifically designed for Edson's Vision Series Light Arms. With 3NM of 360° visibility while drawing a fraction of the power of traditional incandescent lights, Attwood's 3NM LED Masthead/Anchor light is one of the first of its kind. Constructed of corrosion resistant composites with stainless steel accents, this product was designed for the harsh coastal marine environment. For use on boats up to 65.6 ft. (20 meters) The 67510 Attwood LED Anchor/Steaming Light requires an Edson Light Arm that is secured to a Vision Series Base Mount with a Light Arm Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm Receiver,  Base Mount and Mounting Plate separately.

SC113 PowerTower® Port Light Bar w/Integrated 360° White LED Light Scanstrut integrated light mount comes pre-fitted with a LED 360° all-round white light. Compatible With: Scanstrut aft leaning PowerTower® radar mounts Features: Perfect anchor / steaming light upgrade All mounting holes predrilled for easy retrofit installation No extra fastenings required Cables run internally via a watertight seal Technical Specifications: Range 2NM Input Voltage - 12V Material - 316 Stainless Steel Height - 17" (431mm) Mount Position - Port side In the Box: Light bar LED 360° all-round light - White Instruction manual *Sold as an Individual

GPS Mount with Light Extension Adapter Edson's 67400 GPS Mount with Light Extension Adapter is specifically designed for Edson's Vision Series Light Arms. The  powder coated stainless steel GPS Mount allows you to add a GPS antenna to your Light Arm. The GPS Mount also has an extension to attach your navigation anchor/steaming light.  *Shown with optional Perko Anchor/Steaming Light. Must be ordered separately.* The 67400 GPS Mount with Light Extension Adapter requires an Edson Light Arm that is secured to a Vision Series Base Mount with a Light Arm Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm Receiver,  Base Mount and Mounting Plate separately.

Stainless Steel LED (CREE) Docking Lights  These Docking Lights are constructed of corrosion resistant stamped 304 stainless steel. Features two high power Cree LEDs providing 1300 lux light output from the front array, with a focused beam angle of 10° for a concentrated light beam. Eight regular LEDs on the top array have a wide-angle beam of 90° to illuminate a large portion of the dock area. Front lights and top lights can be controlled separately. Their small footprint makes for easy installation. Surface mounted with two #8 RH fasteners (not included). 300 lumens. Low amp draw of 0.28 @ 12VDC. IP68 waterproof rating. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

APT-LB-L1 PowerTower® Central Light Bar w/Integrated 360° White LED Light Maximize your Navlight performance.  Integrated light mount comes pre-fitted with a LED 360° all-round white light. Compatible With: Scanstrut aft leaning PowerTower® radar mounts Features: Perfect anchor / steaming light upgrade All mounting holes predrilled for easy retrofit installation No extra fastenings required Cables run internally via a watertight seal Technical Specifications: Range 2NM Input Voltage - 12V Material - Aluminum Height - 15.9" (404mm) Mount Position - Center In the Box: Light bar LED 360° all-round light - White Instruction manual *Sold as an Individual

Deck and Dock LED Light Kit Operates 12 Volt DC systems Included transformer plugs into standard outlet Ideal for illuminating decks, docks, and walkways Low cost insurance for lighted pathways Can be expanded up to 26 total lights Amber colored LED lights Kit Includes: 1 AC/DC transformer with 60 ft. of attached wire 1 UL Listed junction box 4 3-LED Step Lights 12 LED Accent Lights 32 Stainless Steel Screws 34 Wire Snap Quick Connects 40 Insulated Staples

Deck and Dock LED Light Kit Operates 12 Volt DC systems Included transformer plugs into standard outlet Ideal for illuminating decks, docks, and walkways Low cost insurance for lighted pathways Can be expanded up to 26 total lights Blue colored LED lights Kit Includes: 1 AC/DC transformer with 60 ft. of attached wire 1 UL Listed junction box 4 3-LED Step Lights 12 LED Accent Lights 32 Stainless Steel Screws 34 Wire Snap Quick Connects 40 Insulated Staples

Accent Lighting Flex Strip 16' Terminated w/20' of Lead Wire The Shadow-Caster Accent Lighting Controller (SCM-ALC-Box) allows for lighting control of our Accent Light LED Strips (SCM-AL Strip). You will be able to dim or change colors by toggling the power switch. Light up all of the indirect areas of your boats interior and deck space with this combination. Specifications: Conveniently installs in the gunwale space and coves of your deck The same kit will work with either 12 volt or 24 volt systems Changes colors from Red, Green, Blue and White Integrated light dimming feature to easily select output intensity Integrated fading between Blue and White, or Red, Green, Blue and White Compatible with our Zone Controller WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Accent Lighting Flex Strip 8' Terminated w/20' of Lead Wire The Shadow-Caster Accent Lighting Controller (SCM-ALC-Box) allows for lighting control of our Accent Light LED Strips (SCM-AL Strip). You will be able to dim or change colors by toggling the power switch. Light up all of the indirect areas of your boats interior and deck space with this combination. Specifications: Conveniently installs in the gunwale space and coves of your deck The same kit will work with either 12 volt or 24 volt systems Changes colors from Red, Green, Blue and White Integrated light dimming feature to easily select output intensity Integrated fading between Blue and White, or Red, Green, Blue and White Compatible with our Zone Controller WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

360-Series 4" LED Off-Road Fog Light Drive Beam with Red Backlight - Black Housing The optimized beam patterns project up to 8,600 raw lumens and are protected by an aluminum housing, features a blacked-out circuit board, prominent RIGID branding, and limited lifetime warranty making them the most robust and useful round lights on the market.  RIGID’s 360-Series feature beam patterns available from 17 degrees to 60 degrees, offering an option for any application.  Available in 4 backlight colors: red, white, blue or amber. RIGIDs 360-Series round lights seamlessly integrate into multiple OEM applications and makes it easier than ever to Own The Night.  Harness sold separately.  Features: Patented Optics 50,000 Hr+ LED Lifespan 9-36 VDC Black Exposed Printed Circuit Board Back-Lighting Independently Controlled Alloy Housing & Heatsink Dedicated Wire to Run Back-Lighting without Primary LEDs Pressure Equalizing Vent