|
Tiller Lock Box
This inexpensive product turns any boat with a ball-grip Forespar® tiller extension into a boat with a simple, effective and adjustable tiller lock. Install one into your cockpit coaming and you have it in minutes.
Cut-out dimensions: 3-3/8”w X 4-3/4”h X 1-1/2”d.
|
47.18 |
|
|
Tiller Lock Gun - Grey
This tiller lock maintains the rugged reliability of the original and brings the design fully up to date.
Design suitable for any tiller-steered yacht or sports boat
A simple mechanism allows the tiller to be set and adjusted, which is indispensable for short-handed sailing
The innovative design incorporates a snubber, which holds a far better course than simply lashing the tiller
A variety of methods for fixing or locking the tiller have been used over the years, and many have only been adequate. Improvements in performance involving short keels and dagger rudders are often transom-hung and suffer from an unfortunate handicap. With no skeg and no shelf, but with a sensitive rudder, a boat will fall off her elegant balancing act if the helmsman lets go of the tiller. The increased sensitivity and faster response of newer boat designs call for a better system. Such a system should:
1. Allow precise locking of the tiller with minimum difficulty.
2. Be quick and simple to operate when locking and particularly when releasing.
3. If possible, the system should be able to be detached instantly from the tiller in the event of any emergency.
This Tiller Lock rope lock was designed to meet these points. The device consists of a sheave and lever cam with a toothed slider mounted in a block that is fitted beneath the tiller. The rope is fitted across the back part of the cockpit as a means of keeping it under tension. When locked onto the rope, the toothed slider prevents the tiller from moving in either direction.
Features:
Releasing the lock (by turning the lever to port) immediately frees the tiller and allows the rope to ride freely over the sheave for manual steering
In an emergency or when the device is not required, the rope can easily be snapped out of the block by a downward pull, clearing the tiller
Specifications:
Weight: 0.2kg
Color: Grey
|
65.52 |
|
|
From now until December 31st, 2011, enjoy FREE unlimited updates when you purchase Navionics Hotmaps Premium, Hotmaps Platinum, Fish'N Chip, Gold or Platinum Plus products. See our complete Navionics line at
http://www.clrmarine.com/462m4/cartography-navionics.html
Otterbox has not released there new product yet. Our Distributor has 800 OTTERBOX DEFENDER SERIES APPLE IPOD TOUCH 4TH GENERATION on order and have 499 of those commited to customers at this time. See all 225 Otterbox items at
http://www.clrmarine.com/462m4/manufacturers/otterbox.html
|
|
|
Troll-Tamer™ for MotorGuide Trolling Motor Stabilizer Lock 5"-8" Spacing
The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions
|
148.45 |
|
|
Oceanic Boutique 40" Dock Box
This dock box measures 40" X 21" X 19" and has one hasp for locking the box.
UV Gel Coat offers long lasting Durability
Reinforced Fiberglass Dock Box with
3/16" - 1/4" Wall Thickness
Stainless Steel Hardware include the following:
Gas Springs, Hinges, Ventilation Grids, and Hasps.
This item ships by truck from Miami Florida. Please go to https://www.clrmarine.com/Contact-Us to request a shipping quote. Please provide us the following information. Ship to address with zip code, also tell us if there is a forklift or dock at the ship to address.
|
499.00 |
|
|
Oceanic Boutique 51" Dock Box
This dock box measures 51" X 22" X 24" and has one hasp for locking the box.
UV Gel Coat offers long lasting Durability
Reinforced Fiberglass Dock Box with
3/16" - 1/4" Wall Thickness
Stainless Steel Hardware include the following:
Gas Springs, Hinges, Ventilation Grids, and Hasps.
This item ships by truck from Miami Florida. Please go to https://www.clrmarine.com/Contact-Us to request a shipping quote. Please provide us the following information. Ship to address with zip code, also tell us if there is a forklift or dock at the ship to address.
|
660.00 |
|
|
Oceanic Boutique 55" Dock Box
This dock box measures 55" X 22" X 24" and has one hasp for locking the box.
UV Gel Coat offers long lasting Durability
Reinforced Fiberglass Dock Box with
3/16" - 1/4" Wall Thickness
Stainless Steel Hardware include the following:
Gas Springs, Hinges, Ventilation Grids, and Hasps.
This item ships by truck from Miami Florida. Please go to https://www.clrmarine.com/Contact-Us to request a shipping quote. Please provide us the following information. Ship to address with zip code, also tell us if there is a forklift or dock at the ship to address.
|
680.00 |
|
|
Oceanic Boutique 72" Dock Box
This dock box measures 72" X 22" X 24" and has two hasps for locking the box.
UV Gel Coat offers long lasting Durability
Reinforced Fiberglass Dock Box with
3/16" - 1/4" Wall Thickness
Stainless Steel Hardware include the following:
Gas Springs, Hinges, Ventilation Grids, and Hasps.
This item ships by truck from Miami Florida. Please go to https://www.clrmarine.com/Contact-Us to request a shipping quote. Please provide us the following information. Ship to address with zip code, also tell us if there is a forklift or dock at the ship to address.
|
750.00 |
|
|
Oceanic Boutique 76" Dock Box
This dock box measures 76" X 27" X 26" and has two hasps for locking the box.
UV Gel Coat offers long lasting Durability
Reinforced Fiberglass Dock Box with
3/16" - 1/4" Wall Thickness
Stainless Steel Hardware include the following:
Gas Springs, Hinges, Ventilation Grids, and Hasps.
This item ships by truck from Miami Florida. Please go to https://www.clrmarine.com/Contact-Us to request a shipping quote. Please provide us the following information. Ship to address with zip code, also tell us if there is a forklift or dock at the ship to address.
|
975.00 |
|
|
Oceanic Boutique 81" Dock Box
This dock box measures 81" X 29" X 33" and has two hasps for locking the box.
UV Gel Coat offers long lasting Durability
Reinforced Fiberglass Dock Box with
3/16" - 1/4" Wall Thickness
Stainless Steel Hardware include the following:
Gas Springs, Hinges, Ventilation Grids, and Hasps.
This item ships by truck from Miami Florida. Please go to https://www.clrmarine.com/Contact-Us to request a shipping quote. Please provide us the following information. Ship to address with zip code, also tell us if there is a forklift or dock at the ship to address.
|
1160.00 |
|
|
Oceanic Boutique 71" Dock Box
This dock box measures 71" X 29" X 33" and has two hasps for locking the box.
UV Gel Coat offers long lasting Durability
Reinforced Fiberglass Dock Box with
3/16" - 1/4" Wall Thickness
Stainless Steel Hardware include the following:
Gas Springs, Hinges, Ventilation Grids, and Hasps.
This item ships by truck from Miami Florida. Please go to https://www.clrmarine.com/Contact-Us to request a shipping quote. Please provide us the following information. Ship to address with zip code, also tell us if there is a forklift or dock at the ship to address.
|
995.00 |
|
|
Spare Cap f/1313 Gas Fill
Non-Locking Spare Cap f/1313 Gas Fill
|
10.99 |
|
|
12kW Radar Gearbox f/FR8125 or FAR1513
Furuno 12kW Gearbox RSB0070-086A specifically for Furuno's FR8125 Radar or FAR1513 Radar.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
5201.78 |
|
|
Major Repair Kit for Sherwood F-85
This kit contains the following items
MS DATA SHEET
1
DATA SHEET
SH 10072
1
CAM
SH 10514C
1
LIP SEAL
SH 10515C
1
SCREW & WASHER
SH 11360A
1
GASKET
SH 12211
2
BALL BEARING
SH 12220
1
COVER
SH 12710
4
LOCKWASHER
SH 4432
1
KEY
SH 9919
4
SCREWS
SH 9959K
1
IMPELLER KIT
WB 11143
1
MOUNTING GASKET FOR F85
This kit is put together at time of order.
|
452.46 |
|
|
Major Rebuild Kit for Sherwood F-95
This kit contains the following items
GY 211P-2
1
SQ-HD-PLUG 1/8-B
MS DATA SHEET
1
DATA SHEET
SH 10183
1
COVER ASSEMBLY
SH 10515C
1
SCREW & WASHER
SH 10615K
1
IMPELLER KIT
SH 10927
1
SEAL/SEAT ASSEMBLY
SH 10929
1
CAM
SH 10931
1
VELLUMOID 505 FIBRE GASKET
SH 12710
4
LOCKWASHER
SH 1311
2
DOWELL PIN
SH 1482
4
SCREW HEX HD 1/4"-20 x 1/2"
SH 4257
1
BALL BEARING
SH 4258
3
SNAP RING (SMALL)
SH 4259
1
SNAP RING (LARGE)
SH 4432
1
KEY
This kit is put together at time of order.
|
455.05 |
|