|
Engine Shutdown - 5 Circuit with 20A Relays - Round Display
If a fire breaks out aboard a diesel powered vessel, the engine(s) must be shut down prior or during the discharge of a suppression system to effectively extinguish the fire. Continued engine operation may remove the agent, lowering the concentration required to effectively extinguish the fire, making an Engine Shutdown System necessary.
Consisting of a Shutdown Control Module and Helm Display Unit with an Override Button the Fireboy Engine Shutdown Systems is an effective means to automatically shut down engines, generators, and blower systems in the event of a fire.
Technical Specifications:
Operating Voltage - 9 to 38 VDC
Maximum Current Draw - 310mA @ 12 VDC
Operating Temperature - 22°F (-6°C) to 158°F (70°C)
Circuits - Five (5) with 20 Amp relays
*Sold as an Individual
|
397.50 |
|
|
Engine Shutdown - 5 Circuit with 20A Relays - Round Display for Volvo Engines
If a fire breaks out aboard a diesel-powered vessel, the engine(s) must be shut down prior to or during the discharge of a suppression system to effectively extinguish the fire. Continued engine operation may remove the agent, lowering the concentration required to effectively extinguish the fire, making an Engine Shutdown System necessary.
Consisting of a Shutdown Control Module and Helm Display Unit with an Override Button the Fireboy Engine Shutdown System is an effective means to automatically shut down engines, generators, and blower systems in the event of a fire.
Features:
For Volvo engines
Technical Specifications:
Operating Voltage: 9 to 38 VDC
Maximum Current Draw: 310mA @ 12 VDC
Operating Temperature: - 22°F (-6°C) to 158°F (70°C)
Circuits: Five (5) with 20 Amp relays
*Sold as an Individual
|
397.50 |
|
|
Engine Shut Down System
Features:
3 - 20 Amp Circuits
12/24 VDC
Engine Shut Down System
Round Display
|
337.50 |
|
|
8 Circuit Engine Shutdown with Time Delay - Round Display
Features:
Required for Diesel Engines
Each engine shutdown display unit comes with:
Integrated alarm horn
Charged/discharged lights
Override switch for restart or control of auto-shutdown
Additional units and wire harnesses are available for a second station
|
540.00 |
|
|
CO Alarm Internal Battery w/Interconnect - Black
A Carbon Monoxide (CO) detector should be installed in each accommodation space. Small crafts or RV's with an open design may require only one (1) detector for adequate protection. If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.
The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels. Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb). COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage. The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.
The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.
*Long sensor life – approximately 7 year end-of-life (EOL)
Features:
Interconnect up to ten (10) CO alarms - all connected CO alarms sound together
Microprocessor controlled
Compact design for inconspicuous protection
Time-weighted average CO measurement process constantly monitors all CO levels
Highly resistant to most chemicals, solvents & cleaners
CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries. No wiring and reduced labor and material costs to install.
Technical Specifications:
Power Usage - None
Alarm Point - 10% COHb
Alarm Horn - 85 dBA
Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm)
Interconnect Functionality - Yes
*Sold as an Individual
|
135.00 |
|
|
CO Alarm Internal Battery w/Interconnect - White
A Carbon Monoxide (CO) detector should be installed in each accommodation space. Small crafts or RV's with an open design may require only one (1) detector for adequate protection. If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.
The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels. Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb). COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage. The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream.
The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.
*Long sensor life – approximately 7 year end-of-life (EOL)
Features:
Interconnect up to ten (10) CO alarms - all connected CO alarms sound together
Microprocessor controlled
Compact design for inconspicuous protection
Time-weighted average CO measurement process constantly monitors all CO levels
Highly resistant to most chemicals, solvents & cleaners
CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries. No wiring and reduced labor and material costs to install.
Technical Specifications:
Power Usage - None
Alarm Point - 10% COHb
Alarm Horn - 85 dBA
Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm)
Interconnect Functionality - Yes
*Sold as an Individual
|
135.00 |
|
|
3 Circuit Engine Shutdown with Square Display
Designed for low-current, electronically controlled engines. Featuring sealed relays with gold-plated contacts and is guaranteed to operate in all electronic
engine applications. Engine circuit relays feature an operating range of 10 µA to 2 amps. Auxiliary relays have an operating range of 100 mA to 10 amps for the shutdown of generators, dampers, louvers, and other types of related engine room equipment.
Features:
2-2A gold-plated relays
Water-resistant display
Includes 3 ft. cable
Specifications:
Relay Ratings (2A): 2
Relay Ratings (20A): 1
Helm Display: Square DU-SBH-20
|
412.50 |
|
|
Deluxe Helm Display w/Gauge Body, LED & Color Graphics f/Engine Shutdown System - Black Bezel Display
Features/Specifications:
Compact Design
2-3/16" Round Black Bezel
Simple Installation
9-30VDC
Operating Temperature: -40°F to 185°F (-40°C to 85°C)
Reverse Polarity Protected
|
135.00 |
|
|
Deluxe Helm Display w/Gauge Body, LED & Color Graphics f/Engine Shutdown System - Chrome Bezel Display
Features/Specifications:
Compact Design
2-3/16" Round Chrome Bezel
Simple Installation
9-30VDC
Operating Temperature: -40°F to 185°F (-40°C to 85°C)
Reverse Polarity Protected
|
142.50 |
|
|
MA Series Fire Extinguishing System - 450 Cubic Feet
Fireboy-Xintex clean agent fire extinguisher systems are designed to automatically discharge whenever the protected space's ambient temperature reaches 175 degrees Fahrenheit.
When the Fireboy System discharges, the extinguisher is designed to fully empty the HFC-227ea (Heptafluoropropane) and 3M Novec Clean Agent in less than 10 seconds. No clean-up is required. There is no powdery residue or water left behind. The fire is extinguished by a combination of heat reduction and chemical reactions.
*Diesel-powered craft require installation of an Engine Shutdown System
Features:
Protects engine rooms and machinery spaces
Pre-engineered, total flooding system
The safest way to combat an engine room fire
Automatic discharge at 175°F (79°C) with optional manual release
Utilizes HFC-227ea and 3M Novec clean agents – an effective Halon replacement
No water or powdery residue
Includes locking lever for increased safety when removing or installing cable
Certifications:
U.S.C.G.
EN ISO 9094-1 and 9094-2 standards
ISO RINA
MCA Certified
Factory Mutual
Technical Specifications:
Volume Protected - 450 ft3
Dimensions (Dia. x H) - 7.1" x 19.4" (18 x 49.3 cm)
Agent - HFC-227ea and 3M Novec
Agent Weight - 19.4 lbs (8.8 kg)
System Pressure (@70°F) - 240 psi
In the Box:
Fire extinguisher
Mounting bracket
Helm station panel - 90107
Owners manual
*Sold as an Individual
|
1293.75 |
|
|
Deluxe Helm Display w/Membrane Switch, Remote Horn & LEDs f/Engine Shutdown System - Black Bezel Display
Features/Specifications:
Compact Design
2-5/8" Square Black Bezel
Simple Installation
9-30VDC
Operating Temperature: -40°F to 185°F (-40°C to 85°C)
Reverse Polarity Protected
|
142.50 |
|
|
MU Series Horizontal Clean Agent Fire Extinguisher - 225 Cubic Feet
As an enhancement to Fireboy's product line, the company has added this manual/automatic extinguisher designed specifically for horizontal mounting.
This unit uses the FK-5-1-12 clean extinguishing agent and is designed for maximum firefighting efficiency when mounted in the horizontal position.
Why Fireboy-Xintex is Needed:
Continuous protection
Automatic operation
Manual operation with pull cable
Peace of mind
Often detects and suppresses a fire before it is known
International system approvals (FM, USCG, CE, RINA, BV)
FK-5-1-12 Clean Extinguishing Agent approved for marine use worldwide (EPA SNAP and European)
Approved for Class B fires in engine rooms, machinery spaces, and similar industrial applications
Applications:
Fire protection fluid with very low global warming potential (GWP <1)
Low toxicity in a properly designed system (no harm to personnel)
No damage to sensitive equipment
Not targeted for emission reduction or phase-out
Coverage from 25-485 ft3 (0.7-13.7 m3) for engine rooms, machinery spaces, and other enclosed spaces for Class B fires
Factory Mutual and USCG Approved
Don't Just Manage a Fire. Extinguish it.
FK-5-1-12 clean extinguishing agent is a highly effective clean fire suppressant designed to extinguish a fire in its incipient stage before it has a chance to spread.
The FK-5-1-12 clean extinguishing agent evaporates more than 50 times faster than water. Transitions from a liquid to a gaseous state very rapidly when discharged through a nozzle and readily achieves vapor-extinguishing concentrations in the air.
Low toxicity (no harm to personnel)
Extinguishes fires in less than half the time of CO2 and other inert gases
No damage to sensitive equipment
Not targeted for emission reduction or phase-out
Ready to Install
Each Fireboy system includes a heavy-duty powder-coated steel shelf bracket system, helm display, and owner’s manual.
Specifications:
Volume Protected: 225 ft.^3 (6.4 m^3)
Diameter: 6.3 in. (160 mm)
Agent Weight: 12.7 lbs. (5.8 kgs)
Shipping Weight: 17.2 lbs. (8 kgs)
System Pressure: 360 psi @70 degrees F
|
1042.50 |
|
|
Automatic Vertical Fire Extinguisher with Heavy Duty Bracket - 225 Cubic Feet Volume Protected
This fire extinguisher provides clean agent fire suppression and is meant to be mounted vertically with the heavy-duty bracket.
Features:
Discharge is automatic at 175 degrees F (79 degrees C) for round-the-clock engine compartment fire protection
Total flooding of the engine compartment in less than 10 seconds for fast smothering of the fire
FK-5-1-12 clean extinguishing agent leaves no harmful residue to clean up
Easy to read color coded pressure gauge on the cylinder also identifies the “charged/discharged” status
Coverage from 25 ft3 to 1,800 ft3 in a broad array of increments provides maximum coverage at the lowest cost
Integrated shelf bracket mounting system
Up to 4,000 ft3 available with GA FK-5-1-12 Systems
Rugged industrial-designed pressure gauge ensures trouble-free performance
International system approvals (FM, USCG, CE, RINA, BV)
FK-5-1-12 clean extinguishing agent is approved for marine use worldwide (EPA SNAP, European)
Approved for Class B fires in engine compartments, machinery spaces, and similar industrial applications
Many marine insurance providers offer a discount to boaters who install a fixed fire extinguisher system (contact your insurer for details)
CG Series:
Automatic discharge only (@ 175 degrees F / 79 degrees C)
Engine compartments up to 1,000 ft3 (28.3 m3)
Heavy-duty mounting bracket
Helm display
Specifications:
Volume Protected: 225ft3 / 6.4 m3
Diameter: 6.3 in. / 160mm
Total Height: 18.7 in. / 476mm
Agent Weight: 12.1 lbs. / 5.5 kgs
Shipping Weight: 32 lbs. / 14.3 kgs
System Pressure: 360 psi @70 degrees F
|
982.50 |
|
|
Automatic Vertical Fire Extinguisher with Heavy Duty Bracket - 175 Cubic Feet Volume Protected
This fire extinguisher provides clean agent fire suppression and is meant to be mounted vertically with the heavy-duty bracket.
Features:
Discharge is automatic at 175 degrees F (79 degrees C) for round-the-clock engine compartment fire protection
Total flooding of the engine compartment in less than 10 seconds for fast smothering of the fire
FK-5-1-12 clean extinguishing agent leaves no harmful residue to clean up
Easy to read color coded pressure gauge on the cylinder also identifies the “charged/discharged” status
Coverage from 25 ft3 to 1,800 ft3 in a broad array of increments provides maximum coverage at the lowest cost
Integrated shelf bracket mounting system
Up to 4,000 ft3 available with GA FK-5-1-12 Systems
Rugged industrial-designed pressure gauge ensures trouble-free performance
International system approvals (FM, USCG, CE, RINA, BV)
FK-5-1-12 clean extinguishing agent is approved for marine use worldwide (EPA SNAP, European)
Approved for Class B fires in engine compartments, machinery spaces, and similar industrial applications
Many marine insurance providers offer a discount to boaters who install a fixed fire extinguisher system (contact your insurer for details)
CG Series:
Automatic discharge only (@ 175 degrees F / 79 degrees C)
Engine compartments up to 1,000 ft3 (28.3 m3)
Heavy-duty mounting bracket
Helm display
Specifications:
Volume Protected: 175ft3 / 4.9 m3
Diameter: 6.3 in. / 160mm
Total Height: 18.7 in. / 476mm
Agent Weight: 9.4 lbs. / 4.3 kgs
Shipping Weight: 26 lbs. / 11.9 kgs
System Pressure: 360 psi @70 degrees F
|
825.00 |
|
|
Propane Control & Solenoid Valve w/Black Bezel Display
Minimize the risk of personal injury and possible explosions! Conveniently turn off the gas supply at the source with the push of a button when not in use.
Features/Specifications:
Compact Design
2-3/16" Round Black Bezel
Solenoid Valve
Simple Installation
9-30VDC
Operating Temperature: -40°F to 185°F (-40°C to 85°C)
Reverse Polarity
Current Draw @ 12 VDC: Nominal:20mA / Maximum:650mA
|
172.50 |
|