Power Cable 12AWG - Straight - 100' Power cable for FLIR M132, M232, M400, M400XR and M500 models. Features: Heavy duty 12-gauge power leads 100' in Length Straight power connector Low Smoke and Zero Halogen jacketing (LSZH.)

Power Cable RA 12 AWG - 100' FLIR's Power Cable RA 12 AWG comes 100 feet in length.

Quantum™ Q24C Radome w/Wi-Fi & Ethernet - 10M Power Cable Included Raymarine Quantum Radar, by FLIR, is the next generation of marine radar featuring CHIRP pulse compression technology. Setting a standard for compact solid state radar, Quantum delivers superior radar imaging on both long and extremely short ranges. Integrated Wi-Fi and thin cabling simplifies installation plus Quantum's energy efficient and lightweight design provides safe radiated emissions and substantially reduced power consumption. Superior Radar Imaging FLIR's exclusive ATXT advanced target separation technology displays targets like boats, landmarks, rocks, buoys, and weather cells with unsurpassed resolution and separation quality. CHIRP Pulse Compression Excellent short-range detection and enhanced target detail with 18' (6m) minimum range. CHIRP Pulse compression ensures more energy reaches each target, resulting in superior imaging on long ranges. Small Target Detection Quantum's CHIRP Pulse Compression technology identifies small, weak targets, even when positioned close to strong returns. Simplified Installation Simple Wi-Fi connection between Quantum and any Raymarine LightHouse II powered MFD. Quantum's small diameter power cable is easy to route through tight spaces. Easy to upgrade - Quantum uses the same bolt pattern as previous generation radars. Optional Quantum adapter cable eliminate the need to run new radar cables. Energy Efficient & Lightweight Design Weighs 50% less than traditional magnetron radars. Safe Emissions thanks to Quantum's low power solid state radar transmitter. Very low power consumption (17 Watts transmit and 7 watts standby). Extended vessel battery life when under sail.

Quantum™ Q24W Radome w/Wi-Fi Only - 10M Power Cable Included Raymarine Quantum Radar, by FLIR, is the next generation of marine radar featuring CHIRP pulse compression technology. Setting a standard for compact solid state radar, Quantum delivers superior radar imaging on both long and extremely short ranges. Integrated Wi-Fi and thin cabling simplifies installation plus Quantum's energy efficient and lightweight design provides safe radiated emissions and substantially reduced power consumption. Superior Radar Imaging FLIR's exclusive ATXT advanced target separation technology displays targets like boats, landmarks, rocks, buoys, and weather cells with unsurpassed resolution and separation quality. CHIRP Pulse Compression Excellent short-range detection and enhanced target detail with 18' (6m) minimum range. CHIRP Pulse compression ensures more energy reaches each target, resulting in superior imaging on long ranges. Small Target Detection Quantum's CHIRP Pulse Compression technology identifies small, weak targets, even when positioned close to strong returns. Simplified Installation Simple Wi-Fi connection between Quantum and any Raymarine LightHouse II powered MFD. Quantum's small diameter power cable is easy to route through tight spaces. Easy to upgrade - Quantum uses the same bolt pattern as previous generation radars. Optional Quantum adapter cable eliminate the need to run new radar cables. Energy Efficient & Lightweight Design Weighs 50% less than traditional magnetron radars. Safe Emissions thanks to Quantum's low power solid state radar transmitter. Very low power consumption (17 Watts transmit and 7 watts standby). Extended vessel battery life when under sail.

Quantum™ Q24C Radome w/Wi-Fi & Ethernet - 15M Power & 15M Data Cable Included Raymarine Quantum Radar, by FLIR, is the next generation of marine radar featuring CHIRP pulse compression technology. Setting a standard for compact solid state radar, Quantum delivers superior radar imaging on both long and extremely short ranges. Integrated Wi-Fi and thin cabling simplifies installation plus Quantum's energy efficient and lightweight design provides safe radiated emissions and substantially reduced power consumption. Superior Radar Imaging FLIR's exclusive ATX™ advanced target separation technology displays targets like boats, landmarks, rocks, buoys, and weather cells with unsurpassed resolution and separation quality. CHIRP Pulse Compression Excellent short-range detection and enhanced target detail with 18' (6m) minimum range. CHIRP Pulse compression ensures more energy reaches each target, resulting in superior imaging on long ranges. Small Target Detection Quantum's CHIRP Pulse Compression technology identifies small, weak targets, even when positioned close to strong returns. Simplified Installation Simple Wi-Fi connection between Quantum and any Raymarine LightHouse II powered MFD. Quantum's small diameter power cable is easy to route through tight spaces. Easy to upgrade - Quantum uses the same bolt pattern as previous generation radars. Optional Quantum adapter cable eliminate the need to run new radar cables. Energy Efficient & Lightweight Design Weighs 50% less than traditional magnetron radars. Safe Emissions thanks to Quantum's low power solid state radar transmitter. Very low power consumption (17 Watts transmit and 7 watts standby). Extended vessel battery life when under sail.

NMEA 2000 Power Cable With Tee - 1M Ancor's NMEA 2000 Approved Power Cable with Tee allows for power connection to an NMEA 2000 network quickly and easily. The tee is color coded red to make identifying the power cable easy once installed as part of an NMEA 2000 network. The yellow couplers connect to the corresponding Ancor backbone cables and tees creating a simplified, color coded network installation. Features: Color coded for easy installation and component identification 1 meter power cable includes a tee for direct connection to backbone cables Large 18 AWG power conductors to reduce voltage drop, provide better reliability and meet the requirements of ABYC and the USCG for minimum size power conductors NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Axiom & Element Power Cable w/NMEA 2000 Connector - 1.5M Axiom Power Cable, 1.5M Straight with NMEA 2000 Connector

100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - 100' All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.  Features: For use with 100 amp 120V/208V shore power systems  High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)  Ergonomic non-slip TPE coated gripping surfaces  IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant.  Feature integrated locking rings.  Internal frame terminals provide high clamping force for safe and secure contact  Options for use with on-board isolation transformers and male plug only power supply purposes  UL and ABYC approved components Specifications: Length: 100' Neutral Wire: No Female End: Yes Application: Isolation transformer cordset Color: Yellow WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - One-Ended Male Only Cord - Blunt Cut - 100' All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.  Features: For use with 100 amp 120V/208V shore power systems  High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)  Ergonomic non-slip TPE coated gripping surfaces  IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant.  Feature integrated locking rings.  Internal frame terminals provide high clamping force for safe and secure contact  Options for use with on-board isolation transformers and male plug only power supply purposes  UL and ABYC approved components Specifications: Length: 100' Neutral Wire: No Female End: No, Blunt Cut Application: Cable Winch with Isolation Transformer Color: Yellow WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

APT-F-150-02 Aluminum PowerTower® Radar Mount - 6" Forward Leaning The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D, DRS4D-NXT, DRS4W, 18" and 24" NavNet radars Humminbird - AS 21RD4KW radar Intellian - i1 radar Interphase - Mini RE-1, RE-8 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars Koden - 2kW 12" radar KVH - TracVision M1 and TV1 radars Lowrance - 3G/4G, LRA-1800 / RB714A / DX42, LRA-2400 HD radars Majestic - SATMAR32 radar Navman - 18" and 24" Series 8000 radars Nobletec - 2kW (20") radars Northstar - 18" and 24" M Series/8000i Raymarine - 33STV radar Seiwa - SWR-1, 8 and 9 radars Simrad - 3G/4G, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars Sitex - MDS-1, 8, 12, NKE-1066 radars Techmarine - T-72.01, 72.02, 72.04 radars Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium A range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Forward leaning - 33° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual

APT-F-250-02 Aluminum PowerTower® Radar Mount - 10" Forward Leaning The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D, DRS4D-NXT, DRS4W, 18" and 24" NavNet radars Humminbird - AS 21RD4KW radar Intellian - i1 radar Interphase - Mini RE-1, RE-8 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars Koden - 2kW 12" radar Lowrance - 3G/4G, LRA-1800 / RB714A / DX42, LRA-2400 HD radars Navman - 18" and 24" Series 8000 radars Nobletec - 2kW (20") radars Northstar - 18" and 24" M Series/8000i Seiwa - SWR-1, 8 and 9 radars Simrad - 3G/4G, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars Sitex - MDS-1, 8, 12, NKE-1066 radars Techmarine - T-72.01, 72.02, 72.04 radars Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium A range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 9.84" (250mm) Mounting Type - Forward leaning - 33° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual

16/2 Round Safety Duplex Cable - Red/Yellow - 100' Round boat cable is the ideal choice for installation in tight spaces like boat hulls.  All Pacer round boat cable is manufactured in the USA.  Pacer's manufactured round boat cable is UL approved.  The tinned copper conductors provide resistance to corrosion.   This boat cable is the ideal multiconductor boat cable and is easy to install for many reasons.  One reason it works so well is the fact that it can bend in any direction.  With other, flatter cables, your range of motion is limited.  It is also made from Type III finely stranded tinned copper conductors and it has a flexible high-quality PVC insulation and jacket.  These things work together to make this the best boat cable available and the easiest to install in small workspaces.  It also withstands the frequent vibration and flex commonly found in marine environments.  Pacer's round boat cable is the perfect choice for a multitude of marine jobs.  It's perfect for running through t-tops, sailing spars, and poling platforms.  Also, it's the ideal choice for small hulls or other tight workspaces.  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.  Features: Type III, stranded, tinned copper conductors Highly flexible Easy to install and organize  Easily sealed through bulkheads Compliances: UL Standard - 1426  U.S.C.G - 33 CFR part 183  ABYC - E-11.16  Technical Specifications: Conductor - Annealed Fine Stranded Tinned Copper, ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture No. of Conductors - 2 Type of Cable - Duplex  Shape of Jacket - Round *Sold as an Individual

14/2 AWG Round Safety Duplex Cable - Red/Yellow - 100' Round boat cable is the ideal choice for installation in tight spaces like boat hulls.  All Pacer round boat cable is manufactured in the USA.  Pacer's manufactured round boat cable is UL approved.  The tinned copper conductors provide resistance to corrosion.   This boat cable is the ideal multiconductor boat cable and is easy to install for many reasons.  One reason it works so well is the fact that it can bend in any direction.  With other, flatter cables, your range of motion is limited.  It is also made from Type III finely stranded tinned copper conductors and it has a flexible high-quality PVC insulation and jacket.  These things work together to make this the best boat cable available and the easiest to install in small workspaces.  It also withstands the frequent vibration and flex commonly found in marine environments.  Pacer's round boat cable is the perfect choice for a multitude of marine jobs.  It's perfect for running through t-tops, sailing spars, and poling platforms.  Also, it's the ideal choice for small hulls or other tight workspaces.  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.  Features: Type III, stranded, tinned copper conductors Highly flexible Easy to install and organize  Easily sealed through bulkheads Compliances: UL Standard - 1426  U.S.C.G - 33 CFR part 183  ABYC - E-11.16  Technical Specifications: Conductor - Annealed Fine Stranded Tinned Copper, ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture No. of Conductors - 2 Type of Cable - Duplex  Shape of Jacket - Round *Sold as an Individual

10/2 AWG Round Safety Duplex Cable - Red/Yellow - 100' Round boat cable is the ideal choice for installation in tight spaces like boat hulls.  All Pacer round boat cable is manufactured in the USA.  Pacer's manufactured round boat cable is UL approved.  The tinned copper conductors provide resistance to corrosion.   This boat cable is the ideal multiconductor boat cable and is easy to install for many reasons.  One reason it works so well is the fact that it can bend in any direction.  With other, flatter cables, your range of motion is limited.  It is also made from Type III finely stranded tinned copper conductors and it has a flexible high-quality PVC insulation and jacket.  These things work together to make this the best boat cable available and the easiest to install in small workspaces.  It also withstands the frequent vibration and flex commonly found in marine environments.  Pacer's round boat cable is the perfect choice for a multitude of marine jobs.  It's perfect for running through t-tops, sailing spars, and poling platforms.  Also, it's the ideal choice for small hulls or other tight workspaces.  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.  Features: Type III, stranded, tinned copper conductors Highly flexible Easy to install and organize  Easily sealed through bulkheads Compliances: UL Standard - 1426  U.S.C.G - 33 CFR part 183  ABYC - E-11.16  Technical Specifications: Conductor - Annealed Fine Stranded Tinned Copper, ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture No. of Conductors - 2 Type of Cable - Duplex  Shape of Jacket - Round *Sold as an Individual

12/2 AWG Round Safety Duplex Cable - Red/Yellow - 100' Round boat cable is the ideal choice for installation in tight spaces like boat hulls.  All Pacer round boat cable is manufactured in the USA.  Pacer's manufactured round boat cable is UL approved.  The tinned copper conductors provide resistance to corrosion.   This boat cable is the ideal multiconductor boat cable and is easy to install for many reasons.  One reason it works so well is the fact that it can bend in any direction.  With other, flatter cables, your range of motion is limited.  It is also made from Type III finely stranded tinned copper conductors and it has a flexible high-quality PVC insulation and jacket.  These things work together to make this the best boat cable available and the easiest to install in small workspaces.  It also withstands the frequent vibration and flex commonly found in marine environments.  Pacer's round boat cable is the perfect choice for a multitude of marine jobs.  It's perfect for running through t-tops, sailing spars, and poling platforms.  Also, it's the ideal choice for small hulls or other tight workspaces.  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.  Features: Type III, stranded, tinned copper conductors Highly flexible Easy to install and organize  Easily sealed through bulkheads Compliances: UL Standard - 1426  U.S.C.G - 33 CFR part 183  ABYC - E-11.16  Technical Specifications: Conductor - Annealed Fine Stranded Tinned Copper, ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture No. of Conductors - 2 Type of Cable - Duplex  Shape of Jacket - Round *Sold as an Individual