|
Eskimo Cup Holder - 12VDC
The Dometic Eskimo Cup is a thermoelectric refrigerated cup holder. It is designed to accommodate mounting into surfaces of various thicknesses.
A polished marine-quality 316 stainless-steel trim ring finishes the surface installation and is accented with two blue LED interior lights.
Features:
Keeps cold beverages chilled while you drink them, even on a hot day
Holds beverage containers up to 20 ounces (591 ml)
Replaces most standard cup holders and is easy to install
Polished 316 stainless steel trim ring
Blue LED interior lights
DC-powered premium thermoelectric Peltier cooling element
Easy to keep clean with a non-stick aluminum surface and built-in drain
Electronics are completely sealed for protection against salt spray
Safety features include a low-voltage cut off to avoid a dead battery, a high-voltage cut off to prevent damage to the unit, a high-heat cut-off, and an in-line fuse
4" recessed cup holder
Powered by the house battery
*Sold as an Individual
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
149.26 |
|
|
RAM® X-Grip® with RAM-A-CAN™ II Cup Holder Mount for 7"-8" Tablets
The RAP-299-3-UN8U consists of the RAM-A-CAN™ cup holder base, double socket system, and universal spring-loaded X-Grip® cradle for 7"-8" tablets. The cup holder base includes a 6" flex mounting feature. A durable composite shell construction and soft fins that can be trimmed to fit make the cup holder mount one of the most portable and versatile “Go Anywhere” products offered. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
The included X-Grip® cradle has a clean and clever four-leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring-loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Specifications:
Hardware Included: Assembly Hardware, (1) Optional Tether, (1) Glue Tube for Rubber Caps
Product Dimensions: Overall Height: 10.8"
Holder Dimensions: Width Range: 2.5" - 5.75", Depth Range: .875" max
Wedge Dimensions: Fits cup holders between 2.57" - 3.5" inside diameter
Socket To Socket Length: 3"
Ball Size: B Size (1")
Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb
Packaging Type: Polybag
Weight: 1.83 lbs.
|
73.49 |
|
|
Plastic Rod & Cup Holder Backing Plate for Round Rod/Cup Only for 3-3/4" Holes
Threaded Backing Plates for replacing existing ø3-3/4 cup holders with ROUND ABS PLASTIC Combination Rod & Cup Holders. Screws are included.
For use with Round Top ABS Plastic Only in a ø3-3/4 existing hole.
|
5.75 |
|
|
Stainless Steel Rod & Cup Holder Backing Plate for Round Rod/Cup Only for 3-3/4" Holes
Threaded Backing Plates for replacing existing ø3-3/4 cup holders with round SST plastic combination rod and cup holders.
For use with round top SST plastic only in a ø3-3/4 existing hole.
Features:
Screws are included
|
18.08 |
|
|
Clamp-On Rail Mounted Cup Holder - Large for Up to 2" Rail - White
Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 1-1/2-inch to 2-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers.
Features:
The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 1-1/2-inch to 2-inch boat rails
Compatibility: Fits most standard cups, cans, bottles and tumblers
Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place
Durable Construction: Constructed of a durable, UV-resistant polymer
Color: White
|
10.62 |
|
|
Clamp-On Rail Mounted Cup Holder - Small for Up to 1-1/4" Rail - White
Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 3/4-inch to 1-1/4-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers.
Features:
The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 3/4-inch to 1-1/4-inch boat rails
Compatibility: Fits most standard cups, cans, bottles and tumblers
Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place
Durable Construction: Constructed of a durable, UV-resistant polymer
Color: White
|
9.88 |
|
|
Clamp-On Rail Mounted Cup Holder - Large for Up to 2" Rail - Grey
Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 1-1/2-inch to 2-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers.
Features:
The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 1-1/2-inch to 2-inch boat rails
Compatibility: Fits most standard cups, cans, bottles and tumblers
Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place
Durable Construction: Constructed of a durable, UV-resistant polymer
Color: Grey
|
10.62 |
|
|
Clamp-On Rail Mounted Cup Holder - Small for Up to 1-1/4" Rail - Grey
Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 3/4-inch to 1-1/4-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers.
Features:
The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 3/4-inch to 1-1/4-inch boat rails
Compatibility: Fits most standard cups, cans, bottles and tumblers
Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place
Durable Construction: Constructed of a durable, UV-resistant polymer
Color: Grey
|
9.88 |
|
|
Cup Holder - 316 Stainless Steel
Features:
Stainless Steel Cup Holder @3.25ID
Matches our ELITE Series Rod & Cup Holders
Cutout Diameter: ø3.5”
Flange Diameter: 4.75″
Ø1/2 Drain Barb
Adhesive Tape / Gasket Installation – Included
316L Stainless Steel
|
37.81 |
|
|
Rod/Cup Holder - 304 Stainless Steel - 0°
Threaded body includes locking nut for easy installation. No backing plate needed. Open bottom with threaded insert for pipe/hose barb installation. Includes pin for locking rod in place.
Features:
304 S.S. 0° Rod/Cup Holder
Material: 304 Stainless Steel
Rod Holder Degree: 0°
Cupholder O.D.: 4-3/4"
Depth: 2-1/2"
Cut-Out: 4"
|
107.83 |
|
|
Sandbar Slug Portable Cup Holder
Portable Cup Holder
Features:
Easily adjusts for 15° and 30° rod holders
Keeps your drinks readily available
Add extra drink holders in an instant
Perfect for the sandbar
|
17.93 |
|
|
Rod/Cup Holder - 304 Stainless Steel - 15°
Threaded body includes locking nut for easy installation. No backing plate needed. Open bottom with threaded insert for pipe/hose barb installation. Includes pin for locking rod in place.
Features:
304 S.S. 15° Rod/Cup Holder
Material: 304 Stainless Steel
Rod Holder Degree: 15°
Cupholder O.D.: 4-3/4"
Depth: 2-1/2"
Cut-Out: 4"
|
107.83 |
|
|
Rod/Cup Holder - 304 Stainless Steel - 30°
Threaded body includes locking nut for easy installation. No backing plate needed. Open bottom with threaded insert for pipe/hose barb installation. Includes pin for locking rod in place.
Features:
304 S.S. 30° Rod/Cup Holder
Material: 304 Stainless Steel
Rod Holder Degree: 30°
Cupholder O.D.: 4-3/4"
Depth: 2-1/2"
Cut-Out: 4"
|
107.83 |
|
|
RAM Drink Cup Holder Mount
Part #: RAM-B-132U
A favorite world wide, the RAM self leveling drink cup holder will bring a smile to anyone's face when they get it. The perfect accessory for any vehicle including motorcycles, ATV's, Big Rigs, and yes, even your prized riding lawn mower. Easily installed and positions to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. Take a corner as hard as you like, this holder is ready to ride.
Included is a cozy, self leveling drink cup, double socket arm and 2.5" diameter round base the contains the universal AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with an adjustment point at the round base and base of the cup holder.
Ball Size:
1" Rubber "B" Ball Size
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
|
33.41 |
|
|
RAM Drink Cup Holder Mount w/ Diamond Base
Part #: RAM-B-102-132u
A favorite world wide, the RAM self leveling drink cup holder will bring a smile to anyone's face when they get it. The perfect accessory for any vehicle including motorcycles, ATV's, Big Rigs, and yes, even your prized riding lawn mower. Easily installed and positions to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. Take a corner as hard as you like, this holder is ready to ride.
Included is a cozy, self leveling drink cup, double socket arm and diamond plate that contains the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with an adjustment point at the diamond plate and base of the cup holder.
Ball Size:
1" Rubber "B" Ball Size
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
|
32.59 |
|