|
Steering Trim Control Unit
Trim Switches on the Steering Wheel Improve Safety and Performance.
This steering trim control unit is molded of black plastic with raised white letters to not only enhance boat appearance but also provide the ultimate in control of any high performance boat. The steering trim control unit mounts easily to steering wheel spokes to place engine trim control at your finger tips for maximum safety and ease of operation. The weather proof, rubber booted, push button switches combined with a black urethane coiled cord provide a unit which will provide trim control without removing hands from steering wheel.
Features:
Puts trim switches on steering wheel for convenience and safety
Allows driver to keep both hands on the steering wheel
Mounts easily on steering wheel spokes
Weatherproof rubber booted switches
Rugged urethane coiled cord
Can be used for trim control or jack plate control
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
108.10 |
|
|
Single Lever Side Mount Control - Black/Chrome
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless the engine is idling
Can be installed horizontally or vertically, on the starboard or port side of the boat
Provided with a brake tension release system adjustable from outside
Pull-out handle disengages shift for warm-up Neutral safety switch X12 - 34543 Q (optional) prevents in-gear starting
Exceeds EN ISO 11547 standards when X12 safety switch is installed
|
444.28 |
|
|
Transom Trim Control Push Button Trim Switch
Transom Trim Control Switch/Hydraulic Jack Plate Switch
Put a trim switch or hydraulic jack plate anywhere you want with this versatile switch. The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18" pigtail wire and installation instructions.
Features:
Trim switch for outboards or stern drives
Hydraulic jack plate switch
Puts Tilt & Trim Control Anywhere
Weatherproof Control Switches
UV stable molded housing
Can Also Operate Power Jack Plates
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
49.16 |
|
|
No. 350 Rodmaster II
Fibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pin
Includes No. 241 combination deck or side mount.
Bolting dimensions: 1 5/16" x 3 3/16"
|
19.74 |
|
|
D-SS PRO Flood LED Surface Mount - Pair - White
One of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.
Features:
Family: D-SS Side Shooter | PRO
Optics: Flood
LED Color: White
Finish Color: White
Mount Type: Surface
Shipping Dimensions: 6" × 8" × 6"
Product Weight: 2.44lb
Sold As: Pair
Up to 50,000+ Hour Lifespan
IP68 Compliant
Impact Resistant Lens
GORE® Pressure Equalizing Vent
Harness & Switch Included
Mounting Brackets Included
Specifications:
Watts: 47
Amp Draw: 3.36
LED's: 7
Raw Lumens: 5544
Lux @ 10m: 71.29
Beam Distance: 84.4 m
Peak Beam Intensity: 7,129 cd
|
292.50 |
|
|
D-SS Series PRO Flood Surface Mount - Black
One of RIGID’s most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam.
The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID’s advanced Spot, Flood, or Driving optics, so there’s a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.
Features:
Up to 50,000+ Hour Lifespan
IP68 Compliant
Impact Resistant Lens
GORE® Pressure Equalizing Vent
Harness & Switch Included
Mounting Brackets Included
Specifications:
Watts: 53
Amp Draw: 3.79
LED's: 8
Raw Lumens: 6336
Lux @ 10m: 60.7
Beam Distance: 77.9 m
Peak Beam Intensity: 6,070 cd
|
162.74 |
|
|
D-SS Series Pro Spot Surface Mount - Pair - Black
One of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.
Features:
Up to 50,000+ Hour Lifespan
IP68 Compliant
Impact Resistant Lens
GORE® Pressure Equalizing Vent
Harness & Switch Included
Mounting Brackets Included
Specifications:
Watts: 45
Amp Draw: 3.21
LED's: 7
Raw Lumens: 5544
Lux @ 10m: 652.41
Beam Distance: 255.4 m
Peak Beam Intensity: 65,241 cd
|
292.50 |
|
|
D-SS Series Pro Driving Surface Mount - Pair - Black
One of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.
Features:
Up to 50,000+ Hour Lifespan
IP68 Compliant
Impact Resistant Lens
GORE® Pressure Equalizing Vent
Harness & Switch Included
Mounting Brackets Included
Specifications:
Watts: 72
Amp Draw: 5.14
LED's: 9
Raw Lumens: 7128
Lux @ 10m: 281.08
Beam Distance: 167.7 m
Peak Beam Intensity: 28,108 cd
|
420.00 |
|
|
D-SS Series PRO Spot Surface Mount- Black
One of RIGID’s most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter PROfessional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam.
The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID’s advanced Spot, Flood, or Driving optics, so there’s a D-SS PRO lighting solution for nearly any application.
The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.
Features:
Side Shooter Optics
GORE® Pressure Equalizing Vent
Harness & Switch Included
High-Grade Aluminum Alloy Heatsink
IP68 Compliant -Dust / Water Ingress
50,000+ Hour Lifespan
9-36 V DC
Impact Resistant Polycarbonate Lens
Integrated Thermal Management System
In the Box:
Mounting Hardware
Stainless Steel, U-Shape Bracket
Harness w/Switch
Deutsch Connector
∗ Sold as an Individual
|
162.74 |
|
|
D-SS Series PRO Driving Surface Mount - Black
One of RIGID’s most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter PROfessional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam.
The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID’s advanced Spot, Flood, or Driving optics, so there’s a D-SS PRO lighting solution for nearly any application.
The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.
Features:
Side Shooter Optics
GORE® Pressure Equalizing Vent
Harness & Switch Included
High-Grade Aluminum Alloy Heatsink
IP68 Compliant -Dust / Water Ingress
50,000+ Hour Lifespan
9-36 V DC
Impact Resistant Polycarbonate Lens
Integrated Thermal Management System
In the Box:
Mounting Hardware
Stainless Steel, U-Shape Bracket
Harness w/Switch
Deutsch Connector
∗ Sold as an Individual
|
225.00 |
|
|
Side Mount Outrigger Holders - Fabricated 304 S.S. - 1-1/8" I.D.-Pair
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. For best installation, use our backing plates 88502-1 or 88505-1. For replacement tubes use 88501 or 88503.
|
114.12 |
|
|
Side Mount Outrigger Holders - Cast 316 S.S. - 1-1/8" I.D.-Pair
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. For best installation, use our backing plates 88502-1 or 88505-1. For replacement tubes use 88501 or 88503.
|
187.49 |
|
|
Side Mount Outrigger Holders - Cast 316 S.S. - 1-1/2" I.D.- Pair
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. For best installation, use our backing plates 88502-1 or 88505-1. For replacement tubes use 88501 or 88503.
|
334.24 |
|
|
Bait Caster / Spinning Rod Holder
Holds a bait caster reel in a cushioned cradle.A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top.
Includes No. 241 combination deck or side mount.
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
19.06 |
|
|
280 Bait Caster / Spinning Rod Holder
Holds a bait caster reel in a cushioned cradle.A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top.
Includes No. 241 combination deck or side mount.
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
19.06 |
|