|
HOT FOOT™ Pro - Top Load Foot Throttle for Chrysler Yamaha
HOT FOOT™ Pro is the ultimate upgrade for the boater looking for safety and performance features that made Hot Foot™ the foot throttle boaters demand. HOT FOOT™ Pro sports a rugged aluminum finish with great color graphics on the pedal to accent any high performance boat. The top loading feature for the throttle cable* makes HOT FOOT™ Pro easier to install and gives more foot and leg room. Standard features include a patented idle stop for the Ficht and Optimax engines, stainless steel return spring, Teflon bushings on all critical pivot points and tow clip for added security.
Features:
Drive your boat like you drive your car
Improved Safety & Throttle Control
Attractive Full Color Pedal Graphics
Topside Cable Connections
Patented Idle Stop for FICHT & Optimax
Stainless Steel Hardware with Teflon Bushings
*Requires Longer Throttle Cable (Not Included)
Optional Slide Mount (HFM-1-DP) available for comfort and multiple drivers.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
193.00 |
|
|
HOT FOOT™ Pro - Top Load Foot Throttle for OMC Mercury
HOT FOOT™ Pro is the ultimate upgrade for the boater looking for safety and performance features that made Hot Foot™ the foot throttle boaters demand. HOT FOOT™ Pro sports a rugged aluminum finish with great color graphics on the pedal to accent any high performance boat. The top loading feature for the throttle cable* makes HOT FOOT™ Pro easier to install and gives more foot and leg room. Standard features include a patented idle stop for the Ficht and Optimax engines, stainless steel return spring, Teflon bushings on all critical pivot points and tow clip for added security.
Features:
Drive your boat like you drive your car
Improved Safety & Throttle Control
Attractive Full Color Pedal Graphics
Topside Cable Connections
Patented Idle Stop for FICHT & Optimax
Stainless Steel Hardware with Teflon Bushings
*Requires Longer Throttle Cable (Not Included)
Optional Slide Mount (HFM-1-DP) available for comfort and multiple drivers.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
180.58 |
|
|
HOT FOOT™ Universal Original Foot Throttle for All Marine Engines
Now compatible with all Mercury 175-300 Pro XS outboard motors
The Original and ONLY real HOT FOOT™ Throttle
Drive your boat safer by driving it like your car. This is the one and only HOT FOOT™ throttle - the original boat foot throttle that has been on the market for 30+ years.
This throttle allows you to drive your boat like you do your car. You keep both hands on the wheel and control the throttle with your foot. The throttle returns to idle if you remove your foot. This throttle is a must-have for safe operation of high performance boats.
Features:
Drive your boat like you drive your car -- features make driving your boat fun and safe
Number one throttle on the market for over 20 years
Provides added safety and performance
Improves throttle control for all outboard and inboards
All cast aluminum and stainless steel hardware
Lightweight and resistant to corrosion
Stainless steel hardware and non-sticking teflon and nylon bearing surfaces for trouble free operation
Nylon and teflon bushings on all critical pivot points
Stainless steel spring returns engine to idle position when released
Equipped with toe clip for additional safety in extreme operating conditions
Uses standard control cables for easy hook-up (longer throttle cable not included)
Mounts directly to floor of boat with four screws (not included)
Patented Idle Stop for FICHT and Optimax Engines
Optional Slide Mount (HFM-1-DP) available for comfort and multiple drivers
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
171.44 |
|
|
Hot Foot™ Throttle Replacement Spring for All Models
Features:
Replacement spring for all HOT FOOT™ Throttle models
Stainless steel
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
17.04 |
|
|
Hot Foot™ Adjustable Slide Mount
This sliding mount allows easy adjustment of the Hot Foot™ throttle position for different drivers or driving conditions. Mount allows over 5" of adjustment for people of different heights.
Features:
Easy Adjustment of Hot Foot™ position
Stainless Steel Fasteners & Release Pin
Allows 5” of Slide Adjustment
Great for multiple drivers of different heights
Allows change of throttle position for longer runs
All extruded aluminum and stainless steel construction
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
77.74 |
|
|
ATLAS™ 10" Hydraulic Jack Plate Heavy-Duty for Verado - Black
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1983.30 |
|
|
ATLAS™ 10" Set Back Hydraulic Jack Plate - Heavy Duty
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1885.68 |
|
|
ATLAS™ 12" Set Back Hydraulic Jack Plate - Heavy Duty - Black
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2086.74 |
|
|
ATLAS™ 6" Set Back Hydraulic Jack Plate - Heavy Duty - Black
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1879.46 |
|
|
ATLAS™ 8" Set Back Hydraulic Jack Plate - Heavy Duty Black
T-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp.
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE
ATLAS™ is truly the best hydraulic jack plate in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China
6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER
ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
ATLAS™ was the first plate to offer a very simple actuator replacement in the field
ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1897.64 |
|
|
Quick Flush™ Outboard Flush Fitting Kit for Mercury & Yamaha Outboards
Provides a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating water pressure keeps the valve sealed when using engine.
Features:
Makes flushing outboard quick and easy
Unique previously patented slide valve replaces outboard flushing port plug
O-ring seal closes off port when operating engine
Quick connect on hose snaps onto valve for flushing
No plug to remove and no difficult turning of hose into port
Takes the hassle out of flushing your outboard
Fits all outboards equipped with a flushing port
Kit consists of slide valve, hose quick connector, and washer
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.96 |
|
|
T-H FLEX™ 1/4" Expandable Braided Sleeving - 100' Roll
T-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter. The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.
Features:
Lightweight Protective Sleeving
Protects Wire, Cables and Hoses
Braided from High Temperature Yarns
Chemical Resistant
Simplifies and beautifies any rigging application
|
45.02 |
|
|
T-H FLEX™ 1/2" Expandable Braided Sleeving - 100' Roll
T-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter. The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.
Features:
Lightweight Protective Sleeving
Protects Wire, Cables and Hoses
Braided from High Temperature Yarns
Chemical Resistant
Simplifies and beautifies any rigging application
|
90.08 |
|
|
T-H FLEX™ 3/4" Expandable Braided Sleeving - 100' Roll
T-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter. The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.
Features:
Lightweight Protective Sleeving
Protects Wire, Cables and Hoses
Braided from High Temperature Yarns
Chemical Resistant
Simplifies and beautifies any rigging application
|
121.39 |
|
|
T-H FLEX™ 1-1/4" Expandable Braided Sleeving - 50' Roll
T-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter. The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.
Features:
Lightweight Protective Sleeving
Protects Wire, Cables and Hoses
Braided from High Temperature Yarns
Chemical Resistant
Simplifies and beautifies any rigging application
|
90.08 |
|