Fuel System Locking Cap f/ 1-1/2" Non-Vented Fills (1324) Black Plastic with Gasket Built in Lock Cylinder Size #0 Fits PERKO Fills 1313 & 1399 Cap Outside Thread Diameter: 1-15/32"

Fuel System Locking Cap f/ 1-1/2" Non-Vented Fills (1324) Black Plastic with Gasket Built in Lock Cylinder Size #1 Fits PERKO Fills 0520, 0527, 0528, 0557, 0599 and 1270 Cap Outside Thread Diameter: 1-7/8"

Fuel Systems

In-Line Fuel Demand Valve Attwood's exclusive Fuel Demand Valve eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine. The valve ensures that fuel is supplied to the engine only when demanded during start-up or engine operation. Designed in partnership with OEM engine manufacturers,  Attwood’s Fuel Demand Valve is compatible with all OEM engine brands. Features: Prevents engine flooding and fuel spillage due to pressurized fuel Allows only the amount of fuel requested by the engine and prevents a pressurized "slug" of fuel from reaching the engine Made of high-strength composite material designed to withstand the harsh marine environment Compatible with 3/8" and 5/16" fuel hose Installs between the fuel tank and the primer bulb Low vacuum restriction helps ensure proper engine function during startup and engine operation (less than 2kPa at 125 liters/hour) Built-in manual override Compatible with Ethanol blended fuels Specifications: Operating Temperature: -4 degrees F to 176 degrees F / -20 degrees C to 80 degrees C / Storage Temperature: -40 degrees F to 176 degrees F / 40 degrees C to 80 degrees C Operating Input Pressure: 138 kPa (20 psi) protected for 276 kPa (40 psi) psi pressure spike Flow Performance: 125 L/H (33 GPH) at <2 kPa (10" gasoline) Hose Size: (inch) 5/16" – 3/8" / (mm) 8 – 10 *Fuel Demand Valve keeps all pressure at the fuel tank when the engine is off

Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Stainless Steel Cap Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling. Features: Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications) Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap Automatic nozzle shutoff 4-18 gpm Stainless Steel finish An essential component of VaporTec and SecureStop Designed and tested to prevent water from entering the fuel system EPA / CARB Certified Hinged audible click cap meets EPA requirements Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards *Compatible with Ethanol blended fuels

Portable Fuel Tank - 6 Gallon with Gauge Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine. Includes gauge. Features: 6 Gallon fuel capacity Compatible with 1/4" NPT fuel fittings Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve Cap with built-in vacuum valve means no need for manual venting High-contrast & easy to read gauge Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 19.82" Width: (inch) 13.50" Height: (inch) 9.16" *Fuel line is not included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Portable Fuel Tank - 3 Gallon with Gauge Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards. Includes gauge. Features:  3 Gallon fuel capacity Compatible with 1/4-inch NPT fuel fittings High-Contrast, easy to read gage Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve UV-grade multi-layer tank material Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Cap with built-in vacuum valve means no need for manual venting Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 16.6" Width: (inch) 11.45" Height: (inch) 7.3" *No fuel line included

Portable Fuel Tank - 12 Gallon with Gauge Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge. Features:  12 Gallon fuel capacity Compatible with 1/4-inch NPT fuel fittings High-Contrast, easy to read gage Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve UV-grade multi-layer tank material Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Cap with built-in vacuum valve means no need for manual venting Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 22.75" Width: (inch) 14.25" Height: (inch) 14.47" *No fuel line included

Fuel Stabilizer - 1 Gallon AMERICA’S #1 FUEL STABILIZER TREATMENT STA-BIL Storage Fuel Stabilizer keeps fuel fresh for quick easy starts after storage. It removes water to prevent corrosion and cleanses carburetors and fuel injectors. This product also protects the engine from gum, varnish, rust, and corrosion and prolongs the life of any engine. Eliminate the need to drain the fuel of your 2 or 4 cycle engine by treating the fuel with STA-BIL before storing. USAGE DIRECTIONS: Use STA-BIL Fuel Stabilizer in any gasoline-powered vehicle or equipment you plan to store for 30-days or longekeeps the fuel fresh for up to 24 months during storage, eliminating the need to drain your tank. Works effectively in all gasoline blends, including Ethanol-blended fuel, up to E-85. 1-ounce (30-milliliter) treats up to 2½ gallons (9.5-liters) of fuel. Use STA-BIL only with fresh fuel, and keep the gas can or tank 95% full to avoid condensation build up in the tank during storage. Run Engine for 5 minutes after adding product to treat entire fuel system. Product does not contain alcohol. Perfect for collector cars, generators, lawn mowers, snow blowers, etc. PERFECT FOR STORING: LAWNMOWERS: Fuel can deteriorate in as little as 60 days, causing gum and varnish to build up in your lawnmower engine. That means difficulty starting the engine, poor performance and reduced engine life. The simplest, easiest fix is using a fuel stabilizer to prevent fuel deterioration during storage. BOATS: Drain the lower unit of old gear oil and replace with a fresh supply. When changing the gear oil, be sure to check for moisture. If water comes out first, or if you see milky or lumpy oil, this is an indication your boat is experiencing moisture contamination and will need new seals before next season. AUTOMOBILES: Fill the tank 95% full with new fuel and add STA-BIL Storage to keep it fresh for up to 24 months. MOTORCYCLES: When putting your bike away for the season, it’s important to find winter storage that is dry and protected from environmental elements. Avoid storing it near windows to prevent the paint from fading with constant contact with light. Features: America’s #1 Fuel Stabilizer Treatment Keeps fuel fresh for long term storage – up to 24 months Eliminates the need to drain fuel prior to storage Ensures quick easy starts after storage by preventing gum and varnish build up* Effective in all gasoline, including Ethanol and Non-Ethanol For all gasoline engines, including 2-Cycle. Use in your vehicles, motorcycles, small engines, generators, boats Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fuel Stabilizer - 1 Gallon *Case of 4* AMERICA’S #1 FUEL STABILIZER TREATMENT STA-BIL Storage Fuel Stabilizer keeps fuel fresh for quick easy starts after storage. It removes water to prevent corrosion and cleanses carburetors and fuel injectors. This product also protects the engine from gum, varnish, rust, and corrosion and prolongs the life of any engine. Eliminate the need to drain the fuel of your 2 or 4 cycle engine by treating the fuel with STA-BIL before storing. USAGE DIRECTIONS: Use STA-BIL Fuel Stabilizer in any gasoline-powered vehicle or equipment you plan to store for 30-days or longekeeps the fuel fresh for up to 24 months during storage, eliminating the need to drain your tank. Works effectively in all gasoline blends, including Ethanol-blended fuel, up to E-85. 1-ounce (30-milliliter) treats up to 2½ gallons (9.5-liters) of fuel. Use STA-BIL only with fresh fuel, and keep the gas can or tank 95% full to avoid condensation build up in the tank during storage. Run Engine for 5 minutes after adding product to treat entire fuel system. Product does not contain alcohol. Perfect for collector cars, generators, lawn mowers, snow blowers, etc. PERFECT FOR STORING: LAWNMOWERS: Fuel can deteriorate in as little as 60 days, causing gum and varnish to build up in your lawnmower engine. That means difficulty starting the engine, poor performance and reduced engine life. The simplest, easiest fix is using a fuel stabilizer to prevent fuel deterioration during storage. BOATS: Drain the lower unit of old gear oil and replace with a fresh supply. When changing the gear oil, be sure to check for moisture. If water comes out first, or if you see milky or lumpy oil, this is an indication your boat is experiencing moisture contamination and will need new seals before next season. AUTOMOBILES: Fill the tank 95% full with new fuel and add STA-BIL Storage to keep it fresh for up to 24 months. MOTORCYCLES: When putting your bike away for the season, it’s important to find winter storage that is dry and protected from environmental elements. Avoid storing it near windows to prevent the paint from fading with constant contact with light. Features: America’s #1 Fuel Stabilizer Treatment Keeps fuel fresh for long term storage – up to 24 months Eliminates the need to drain fuel prior to storage Ensures quick easy starts after storage by preventing gum and varnish build up* Effective in all gasoline, including Ethanol and Non-Ethanol For all gasoline engines, including 2-Cycle. Use in your vehicles, motorcycles, small engines, generators, boats Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Yamaha Fuel Line Kit 6' x 3/8" Attwood's low-permeation fuel line kits set the standard in performance, safety, and value. Along with featuring Attwood's award-winning Universal Sprayless Connector, these kits meet strict United States EPA regulations. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance. Features: Includes Attwood's award-winning Universal Sprayless Connector; no more dangerous fuel sprays when connecting and disconnecting pressurized lines Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors Includes 3/8-inch low-permeation fuel hose that resists kinking and hardening; rated up to 100 degrees Centigrade Versatile: compatible with Ethanol blended fuels, Yamaha Brand engines and tanks Attwood products are both compatible and reliable, engineered and built with a never-fail attitude WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Deck Fill for Pressure Relief Systems - Straight Body & Scalloped Stainless Steel Cap Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling. Features: Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications) Automatic nozzle shutoff 4-18 gpm Stainless Steel finish An essential component of VaporTec and SecureStop Designed and tested to prevent water from entering the fuel system EPA / CARB Certified Hinged audible click cap meets EPA requirements Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards *Compatible with Ethanol blended fuels

Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Black Plastic Cap Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling. Features: Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications) Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap Automatic nozzle shutoff 4-18 gpm Black Composite finish An essential component of VaporTec and SecureStop Designed and tested to prevent water from entering the fuel system EPA / CARB Certified Hinged audible click cap meets EPA requirements Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards *Compatible with Ethanol blended fuels

Deck Fills for Pressure Relief Systems - Straight Body - Scalloped Black Plastic Cap Attwood's Pressure Relief Systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling. Features: Sold as a single unit Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications) Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap Automatic nozzle shutoff 4-18 gpm Black Composite finish An essential component of VaporTec and SecureStop Designed and tested to prevent water from entering the fuel system EPA / CARB Certified Hinged audible click cap meets EPA requirements Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards *Compatible with Ethanol blended fuels

Deck Fill for Carbon Canister System - Straight Body & Scalloped Stainless Steel Cap Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back.  Features: All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling Fits 1-1/2 (inch) fill hose Designed and tested to prevent water from entering the fuel system Compatible with Ethanol blended fuels Stainless Steel finish EPA / CARB Certified Dual 1 psi overpressure relief safety valves built into the deck fill caps Automatic nozzle shutoff 4-18 gpm