The Clipper Compass Repeater has all the features of the master unit and an independent off course alarm. Steer to course function When the steering function is selected a series of chevrons accumulate showing the magnitude and direction of the steering error. To stay on course simply turn the wheel in the direction of the chevrons until they are extinguished. The steering sensitivity can be preset by the user. An off course alarm provides a safety feature when not at the helm. If the heading deviates by more than a preset amount then the alarm will sound. Technical Specifications: Adjustable Damping 1 degree display resolution Display case size 110 x 110mm Depth behind panel 30mm Complete with 5 meter cable, 'O' ring and weather cover This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

The Clipper GPS repeater has quickly established itself as the market leader in cockpit GPS repeaters. Typical of the Clipper range it boats large clear digits and simple operation. Installation coundn't be simpler with just two wing nuts to fasten the unit into the panel ans two wires to connect to the GPS. Technical Specifications: Standard 110mm case Super large high contrast LCD Four instantly accessable display screens Standard NMEA 0183 interface suits most Complete with weather cover and 10 meters of cableThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

The Clipper Compass is a fully electronic compass with remote fluxgate sensor. The large clear display has 7 levels of illumination and gives True or magnetic heading. The sensor which is gimballed for plus/minus 45 degrees of pitch and roll, is mounted in a position where stray magnetic fields are at a minimum. An electronic auto calibration then cancels out small errors. Steer to Course Function - When the steering function is selected a series of chevrons accumulate showing the magnitude and direction of the steering error. To stay on course simply turn the wheel in the direction of the chevrons until they are extinguished. The steering sensitivity can be preset by the user. An off course alarm provides a safety feature when not at the helm. If the heading deviates by more than a preset amount then the alarm will sound. Technical Specifications: Supply voltage nominal 12v DC Consumption, 120mA+ (25mA for display illumination max) Fluxgate accuracy +/- 1 degree Adjustable Damping 1 Degree display resolution Display case size 110 x 110 m Depth behind panel 30mm Fluxgate 175mm diameter x 95mm Sensor supplied with 5 meters of cable Face Cover included Extension cables availableThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Wind Repeater Display Add or replace the display on the Clipper Wind V2 – 3 wire wind mast unit and the Clipper Wireless wind unit.  The Clipper Wind NMEA Repeater has user a selectable pointer style and selectable wind speed scale. It requires the standard NMEA 0183 MWV data sentence. Technical Specifications: Works with NMEA 0183 NMEA protocol  7 levels of display backlighting Dimensions  (H x W x D) - 4.33" x 4.33" x 1.18" (110 x 110 x 30mm) In the Box: 16.5' (5 M) Cable Mounting 'O' ring  Weather cover *Sold as Individual  This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

The Clipper Log Repeater has its own independent alarm function as well as repeating all data from the master unit. Technical Specifications: 40mm high digits 7 level display backlighting Complete with 5 meter cable, 'O' ring and weather cover Consumption 10mA + 25mA for display backlightThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

If you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. Ease of use and display clarity were top of the design brief. All Clipper instruments have giant digits and multilevel backlighting. Technical Specifications: 40mm high digits Depth below transducer/below keel/below surface Deep and shallow alarms (audio and visual) User selectable feet or meters Intellegent gain control & manual override Selectable display rate and depth averaging rate Depth trend indicator No echo indicator High transmit power All settings stored in non volatile memory Tactile keypad Consumption 20mA + 25Ma for backlight (max) ***Note - this is not a stand alone unit and cannot be connected to a depth transducer. It must be connecetd to the Clipper Depth master display unit. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Wireless Masthead & Data Box The mast head transmitter is completely wireless and is supplied with a base unit, which is powered by the vessel's 12Vsupply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to any compatible NMEA display unit. Wireless wind speed and direction data to any compatible NMEA display The masthead transmitter requires only occasional bright daylight falling on the solar panel to top up its internal battery. It will operate for 2000 hours without further solar charging from its fu lly charged battery. Easy insta ll ation with mast in place no wires to run down Simple masthead alignment through base unit Light weight - 190 grams Specifications: Sleep time > 15,000 Hours * Operating time > 2,000 Hours * Charging time < 150 Hours of bright daylight * Fully charged with no further daylight NMEA 0183 4800 Baud 0/P Level 0 to 12 volt from 220 ohm source resistance. NMEA data sentence MWV Supply voltage 6 to 16 volts. (Nominal 12 volts) Supply current 17mA Fuse 1 Amp. Display Wind speed and direction data to any compatible NMEA device The Clipper Wind Repeater disp lay is presented in the industry standard 11Omm square case. It boasts an exceptionally large and clear display with 60 segments for full 360 degree direction indication. Display Unit Spcifications Supply voltage Nomina l12V DC NMEA 0183 input sentence MWV 9 levels of display backlighting Display case size 110 x 11Omm Depth behind panel 30mm Consumption, 1OmA+ (1OmA for display illumination max) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Micropump GA-V23.C8FS.C Pump Head C Mount Micropump Low-flow pump head, pressure-loaded, 0.084 mL/revolution Max Flow Rate (mL/min): 672 Flow Rate (mL/rev): 0.084 Min Flow Rate (mL/min): 12.6 Differential Pressure (PSI): 40 Differential Pressure (bar): 2.8 Max Motor RPM (rpm): 8000 Seal Material: PTFE Body Material: 316 SS Gear Material: Carbon graphite Relief Valve: No Run Dry: Under 30 seconds Duty Cycle Continuous: Yes Particulates: No Max Temperature ( F): 350 Min Temperature ( F): -50 Max Temperature ( C): 177 Min Temperature ( C): -46 Max Viscosity (cP): 100 Model Number: GA-V23.C8FS.C Part Number: 82117

March 815 PL C Beer Pump March Pump’s industrial 815-PL-C is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maximum head is 18.6 Feet (8PSI).   At 60Hz SystemUS                Metric Max Flow8 GPM  30.3 LPM Max Head18.6 FT  5.7 M Power0.04 HP        0.029 KW   At 50Hz USMetric 7.9 GPM30 LPM 13.5 FT4.1 M 0.04 HP0.029 KW   Electrical: 115V 50/60Hz or 230V 50/60Hz Inlet: 3/8"FPT & 3/4"MPT Outlet: 1/2"MPT   Wet End: Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller) Max Internal Pressure: 50 PSI / 3.4 bar Max Liquid Temperature: 250 °F / 121 °C   Applications for the 815-PL-C Magnetic Drive Pump include home brewing, hot water systems, solar heating, and fryers.   The 815-PL-C has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water.

Groco S-87-C Tie Rod .250 X 15.313  

Groco Ht-3560-C Handle &Amp; Grip  

Groco ARG-501-C Cap, Bronze Bronze Cap For strainers after Sept 1, 2001 (010901) Does not come with O-rings Order O-rings Part #(2-135) & (2-228) Separately

Groco Sp-49-C Pump Body W/Only Insid Thrd  

Groco Arg-1501-C Cover Casting And Label  

Groco S-88-C Sight Glass