Flush Mount Rod Holder - 30 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl Liner These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place. Features: 316L stainless steel 1/2 in. threaded drain Specifications: Angle: 30-degrees Length: 9 in. Inner Diameter: 1-5/8 in.

70 Series Standard Flush Mount Rod Holder - 30 Degree - Stainless Steel - Gimbal Bar Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. A built-in gimbal bar on the open bottom allows water to drain and prevents the rod from spinning. Features: 316L stainless steel Fits 2-3/16 in. hole diameter No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 30 degrees Bottom Style: Bar Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Gimbal Bar: ¼ in. wide x ½ in. tall

70 Series Screwless Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner - Boxed These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 30 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Outer Diameter: 2-1/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in.

80 Series Screwless Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. Features: 316L stainless steel Fits 2-9/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 30 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in.

70 Series Standard Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.  Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a 1/2 in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 30 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in.

80 Series Standard Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.  Features: 316L stainless steel Fits 2-1/2 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 30 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-7/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10-1/2 in.

Flush Mount Rod Holder - 15 Degree & 9" Depth - Stainless Steel - Cast Gimbal - White Vinyl Liner These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place. Features: Safe, rounded bottom 316L Stainless Steel 1/2" pipe-threaded drain hole 9" tube Specifications: Angle: 15-degrees Inner Diameter: 1-5/8"  Outer Diameter: 2"  Cap (L x W): 4-1/2 x 3-5/8 inches

Flush Mount Rod Holder - 0 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl Liner These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place. Features: 316L stainless steel 1/2 in. threaded drain Specifications: Angle: 0-degrees Length: 9 in. Inner Diameter: 1-5/8 in.

FLUSH MOUNT Stainless Steel Rod Holders Tough enough for heavy tackle Made of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat. They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place. Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8". ANGLE: 30° LENGTH: 9" I.D.: 1-5/8" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

70 Series Screwless Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black Liner - Boxed These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 0 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Outer Diameter: 2-1/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in.

70 Series Screwless Flush Mount Rod Holder - 15 Degree - Stainless Steel - Cast Bottom - Black Liner - Boxed These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 15 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Outer Diameter: 2-1/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in.

80 Series Screwless Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. Features: 316L stainless steel Fits 2-9/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 0 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in.

80 Series Screwless Flush Mount Rod Holder - 15 Degree - Stainless Steel - Cast Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. Features: 316L stainless steel Fits 2-9/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 15 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in.

80 Series Screwless Flush Mount Rod Holder - 0 Degree - Stainless Steel - Swivel Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. Features: 316L stainless steel Fits 2-9/16 in. hole diameter No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 0 degrees Bottom Style: Swivel Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in.

80 Series Screwless Flush Mount Rod Holder - 15 Degree - Stainless Steel - Swivel Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. Features: 316L stainless steel Fits 2-9/16 in. hole diameter No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 15 degrees Bottom Style: Swivel Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in.