|
Bosworth 2400 Sanitary Hand Pump
Bosworth Hand Diaphragm Pump Guzzler FDA Approved Natural Delrin, .44Qt per Stroke, 1” Smooth Ports, White Buna Flapper Valves, Silicone Diaphragm, Horizontal Handle.
|
110.37 |
|
|
Bosworth 2600 Bronze Hand Pump
Bosworth Hand Diaphragm Pump Guzzler Bronze, 1.4Qt per Stroke, 1 1/4” Female Threaded Ports, Buna Flapper Valves and Diaphragm, Universal Handle for Vertical or Horizontal Pumping Action
|
654.56 |
|
|
March 1A-MD-1/2 Mag Drive Pump
March Pump's industrial 1A-MD-1/2 is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.5 Feet (or around 2PSI). The 1A-MD-1/2 pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, and Stainless Steel. When submerged, Epoxy, Noryl, and the SJT Cord are also in contact with the solution. The inlet connection is 1/2 inch smooth, and the outlet is 1/2 inch smooth. The standard motor is a 1 Phase 115V 0.005 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 160 Celsius in open air, or 87 Fahrenheit or 71 Celsius if submerged. The March 1A-MD-1/2 centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals. To determine if the March 1A-MD-1/2 is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the 1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
Great for Chemicals Including
The 1A-MD-1/2 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals.
Inlet: 1/2"OD
Outlet: 1/2"OD
Wet End: Polypropylene (Front Housing, Rear Housing, Impeller), Buna N (O-Ring), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft)
Uses:Submersible or Open Air
When submerged, the following is also in contact with the solutionEpoxy, Noryl, SJT Cord
P/N:0115-0007-0200 (115V)
|
317.85 |
|
|
March 1A-MD-1/2 Mag Drive Pump
March Pump's industrial 1A-MD-1/2 is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.5 Feet (or around 2PSI). The 1A-MD-1/2 pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, and Stainless Steel. When submerged, Epoxy, Noryl, and the SJT Cord are also in contact with the solution. The inlet connection is 1/2 inch smooth, and the outlet is 1/2 inch smooth. The standard motor is a 1 Phase 230V 0.005 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 160 Celsius in open air, or 87 Fahrenheit or 71 Celsius if submerged. The March 1A-MD-1/2 centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals. To determine if the March 1A-MD-1/2 is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the 1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
Great for Chemicals Including
The 1A-MD-1/2 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals.
Inlet: 1/2"OD
Outlet: 1/2"OD
Wet End: Polypropylene (Front Housing, Rear Housing, Impeller), Buna N (O-Ring), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft)
Uses:Submersible or Open Air
When submerged, the following is also in contact with the solutionEpoxy, Noryl, SJT Cord
P/N 0115-0007-0700 (230V)
|
320.78 |
|
|
Bosworth Y Valve Handle Delrin
Bosworth Y Valve Handle Only fits 94 and 95 series valves made of Delrin
|
4.60 |
|
|
Bosworth 400-H-Ale Guzzler 1" Hand Pump,Smooth
Bosworth- Hand Diaphragm Pump Guzzler Delrin, .44Qt per Stroke, 1" Smooth Ports, Buna Flapper Valves and Diaphragm, Horizontal Handle with Epoxy Coated Aluminum Clamp Ring for Durability
|
106.08 |
|
|
Bosworth 500H 1 1/2" Hand Pump
Bosworth- Hand Diaphragm Pump Guzzler Delrin, .67Qt per Stroke, 1 1/2" Smooth Ports, Buna Flapper Valves and Diaphragm, Horizontal Handle
|
100.18 |
|
|
Bosworth 2600-1 1/4F Alum Hand Pump, Thr Ports
Bosworth Hand Diaphragm Pump Guzzler Epoxy Coated Aluminum, 1.4Qt per Stroke, 1 1/4” Female Threaded Ports, Buna Flapper Valves and Diaphragm, Universal Handle for Vertical or Horizontal Pumping Action
|
601.26 |
|
|
Bosworth 400H Guzzler 1"Hnd Pmp,Smth Prts
Bosworth Hand Diaphragm Pump Guzzler Delrin, .44Qt per Stroke, 1" Smooth Ports, Buna Flapper Valves and Diaphragm, Horizontal Handle
|
79.27 |
|
|
Micropump DG-F61.G1R2P5.J.B I Drive Motor J Mount
Replacement for Micropump I-Drive IEG
J-mount, Speed Control(0-5VDC)
Micropump I-Drive IEG, 0-5 VDC SPEED CONTROL INPUT; J-Mount
|
1649.51 |
|
|
|
3.11 |
|
|
Bosworth 74-B-1/8 1 1/8" Barb
Bosworth Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 1 1/8” Hose Barb
|
21.85 |
|
|
Bosworth 2800-B Guzzler Brz Peo 56C
Bosworth Diaphragm Pump End Only Guzzler Bronze, 13.4GPM, 2” Smooth Ports, 56C Motor Flange, Buna Flapper Valves and Diaphragm
GE-2600B Requires 1/2HP Motor
|
1945.86 |
|
|
Bosworth 1.25 Tapped Inlet Aluminum
|
93.55 |
|
|
Bosworth 1.25 Tapped Outlet Bronze
|
105.79 |
|