|
BURKS 09812F, MOTOR 3PH 3HP ODP CS
|
2064.48 |
|
|
BURKS 330CS8M, TURBINE PUMP 3PH 3HP 230/460V
Bronze Fitted Cast Iron Construction. Close Coupled to a 3 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
|
3291.30 |
|
|
BURKS 330GA6-1 1/4, Centrifugal Pump 230/460v 3PH 3HP
Bronze Fitted Cast Iron Construction. Close Coupled to a 3 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 5.5 Inches.
|
2183.40 |
|
|
BURKS 330CS7M, Turbine Pump 3HP 3PH 230/460v
Turbine Pump, Close Coupled, 60 Hz, Three Phase, 3450/2850 RPM, 3 Horsepower, ODP Motor Enclosure
Bronze Fitted Cast Iron Construction. Close Coupled to a 3 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
Contact us for shipping quote http://www.clrmarine.com/Contact_Us
|
3291.30 |
|
|
FINISH THOMPSON 107324-1 ODP MOTOR 1/3HP 115V
S1 FTI EF Series Motor, ODP (Open Drip Proof), Splash-proof, IP24 Motor
|
299.33 |
|
|
AMT Pump 316A-95 Sewage/Trash Pmp 2" 3Ph 3Hp
Self-Priming Electric Motor Driven Sewage / Trash Pump
2" Cast Iron 3 HP 230/460V 3 Phase TEFC
Motor Frame Size 56J
Totally Enclosed and Fan Cooled
Shaft Seal Material: Viton Silicon/Carbide
|
1309.78 |
|
|
Oberdorfer 5993 Motor 1/3Hp 1725 Rpm
|
567.00 |
|
|
Oberdorfer 9876 Motor 1/3Hp Bracketless F41
|
687.00 |
|
|
OBERDORFER N991RQ-S5-10F18BCT GEAR PUMP & MOTOR 1/3HP 56C
Pump Body: Bronze
Impeller: Lip Seal Buna-N
Port Size: 1/4" inch NPT
Features:
• Rugged corrosion resistant bronze construction
• Compact close-coupled design
• Stainless steel shafts
• Durable bronze spur gears
• Process lubricated carbon graphite bearings
• O-ring cover seal for maximum leak protection
• Buna Lip Seal -standard
• Easy field assembly to a variety of motor frames
• For bronze pedestal pumps and mechanical seal styles - see model N1000
This pump is suitable for all liquids that are compatible with bronze. Most common liquids are water, oil, and mild chemicals in the pH range of 4 to 11. Viscous liquids require reduced shaft speeds of 1150 RPM or lower. Liquids containing solids, abrasives, powders, or paint pigments are definitely not recommended for gear pumps. If abrasives are unavoidable, use a very low shaft speed.
The recommended liquid temperature range is from 32o F to 140o F for best pump life. If more extreme temperature conditions exist, factory should be consulted. Freezing of water-filled pumps can cause damage and must be avoided. Oils at low temperatures are very viscous requiring a lower speed or extra power.
|
1553.76 |
|
|
March 0155-0174-1000 Motor 3Ph 1Hp 230/460V Tefc
|
725.00 |
|
|
BURKS 30WA6, Centrifugal Pump 115/230v 3HP
Burks 30WA6 Centrifugal Pump, Self Priming, 60 Hz, Single Phase, 3500 RPM, 3 Horsepower, ODP Motor Enclosure.
Close Coupled to a 3 Horsepower 115/230 Volts motor
Bronze Fitted Cast Iron Construction w/ Plastic Impeller.
Ports are 1-1/2 Inches NPT Inlet, 1-1/2 Inches NPT Outlet.
Please contact us for a shipping quote at http://www.clrmarine.com/Contact_Us
|
2650.46 |
|
|
BURKS 330CS9M, Turbine Pump 3Hp 3Ph 230/460v
Turbine Pump and Motor unit. Bronze Fitted Cast Iron Construction. Close Coupled to a 3 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
|
3503.48 |
|
|
BURKS 33CT5M, TURBINE PUMP 230/460v 3PH 1/3HP
Bronze Fitted Cast Iron Construction. Close Coupled to a 1/3 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
UNSPSC Code: 40150000
|
1960.20 |
|
|
BURKS 20CS6M Close Coupled Turbine Pump
BURKS exclusive unique regenerative type turbine pumps. Designed to handle clear water in addition to and many other non-abrasive, lower viscosity liquids on high pressure. As well as low capacity applications with the greatest possible efficiency.
BURKS is the only turbine pump with Life-Lok® External Impeller Adjustment. This feature allows re adjustment of impeller without disturbing piping, disassembling pump or replacing parts. This, as a result, gives up to 40% longer service life than turbine pumps of other designs.
Self-Priming Pump
Compact and Space-saving size
No coupling so this eliminates misalignment problems
Dependable carbon/ceramic mechanical shaft seal for same temperatures to 225 °F (107° C).
Bronze impeller with Monel blades, therefore the only moving part
Bronze raceway with cast-in vortex pockets – will not vapor lock
#303 Stainless Steel pump shaft
Every pump is factory tested
Motor Information
4CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 1750 RPM and therefore Three Phase motors are 208-230/460 Volts, 60/50 Hz, 1750/1450 RPM.
CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 3450 RPM Three Phase 1, 11/2 & 2HP. – 208-230/460 Volt, 60/50 Hz., 3450/2900 RPM Three Phase 3 & 5 HP – 208-230/460 Volt, 60 Hz, 3450 RPM Standard pump motors have open drip proof construction and are rated with jet pump service factors for continuous duty operation at all ratings shown. Single phase motors are capacitor
start/induction run with built-in overload protection. Three phase motors require a magnetic type starter which provides full 3-leg overload protection. Failure to use the correct starter and overloads will void the warranty.
High Temperature
For Temperatures to 500 °F (260 °C). Series CS Pumps are available while in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fluids in common use in high temperature heating or cooling applications. This feature greatly extends seal life in high temperature applications.
|
3161.06 |
|
|
BURKS 315CS6M TURBINE PUMP 230/460 Volts 1.5HP
All BRONZE Construction.
Close Coupled to a 11/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
Self-Priming Pump
Compact and Space-saving size
No coupling so this eliminates misalignment problems
Dependable carbon/ceramic mechanical shaft seal for same temperatures to 225 °F (107° C).
Bronze impeller with Monel blades – therefore the only moving part
Bronze raceway with cast-in vortex pockets – will not vapor lock
#303 Stainless Steel pump shaft
Easy to service as a result
Especially relevant, Every pump factory tested
Motor Information
4CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 1750 RPM and Three Phase motors are 208-230/460 Volts, 60/50 Hz, 1750/1450 RPM.
CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 3450 RPM Three Phase 1, 11/2 & 2HP. – 208-230/460 Volt, 60/50 Hz., 3450/2900 RPM Three Phase 3 & 5 HP – 208-230/460 Volt, 60 Hz, 3450 RPM Standard pump motors have open drip proof construction and are rated with jet pump service factors for continuous duty operation at all ratings shown. Single phase motors are capacitor start/induction run with built-in overload protection. Three phase motors require a magnetic type starter which provides full 3-leg overload protection. Failure to use the correct starter and overloads will void the warranty.
High Temperature
For Temperatures to 500 °F (260 °C). Series CS Pumps are available while in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fluids in common use in high temperature heating or cooling applications.
For High Temp Models please use the Contact Us page, also use the Contact Us page for a Shipping Quote.
|
2882.48 |
|