|
SG200 Battery Monitor Kit with Display Shunt & 10M Cable - 12-48 VDC
Balmar’s Expandable, Next Generation Monitor.
Features:
Learns & Displays All Critical Battery Parameters
State of Charge (SoC%)
State of Health (SoH%)
Charge/Discharge Current Flow
Time Remaining
History, Faults & Alerts
Support for All Common Battery Chemistries & Voltages
Including Lead Acid, Lithium (LiFePO4), Standard AGM, TPPL AGM, Carbon Foam AGM, and GEL Batteries
Supports 12V-48V Battery Banks
Typically 97% Accurate within 2 Cycles
Auto-Calibrating
Does not Lose Accuracy with Age
Large, Bright Color Display
Sunlight Readable, Configurable & Dimmable
60 Degree Viewing Angle
Fits in Standard 2 1/16″ Gauge Socket
Expandable Architecture
Support Multiple Displays (Optional)
Supports Multiple Battery Banks (Optional)
Standard Support for 2 Start Batteries (Voltage Only)
Simple, easy-to-install Point-to-Point Network
Optional Smartphone/Bluetooth® Gateway
Free iOS and Android Apps (Requires Bluetooth® Gateway PN SG2-0300)
View All Parameters on your Phone
Download Product Updates
Balmar has combined recent technology advances to introduce a next generation battery monitor. The SG200 is quite simply the most accurate battery monitor available today.
Balmar has combined the best features of its 1st generation Smartgauge™ with many advantages of a shunt-based amp-hour counting system. Further, we’ve designed a device architecture which facilitates multiple gauges or multiple shunts to be added to the network-allowing the boater to monitor multiple energy storage banks simultaneously from multiple locations.
In addition, the SG200 Color Display is easy to read, configurable and fits any standard 2 1/16″ gauge socket. Now you can determine your battery(s) condition from anywhere on the vessel or vehicle with multiple displays, or simply add the optional Bluetooth® Smartphone App to keep information in your pocket!
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
233.45 |
|
|
SG210 Battery Monitor Kit with Display Shunt Gateway
Features:
Learns and displays all critical battery parameters
Supports for all common battery chemistries and voltages
Intelligent, self-calibrating accuracy
Large, bright, color display
Expandable architecture
Includes Display Shunt Gateway
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
280.31 |
|
|
SG205 Battery Monitor Kit with Bluetooth Gateway - No Display
Features:
Learns and displays all critical battery parameters
Supports for all common battery chemistries and voltages
Intelligent, self-calibrating accuracy
No display included
Expandable architecture
Includes Bluetooth Gateway
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
186.55 |
|
|
SG230 Battery Monitor Kit N2K BT Gateway Color Display 12-48VDC
N2K Version, connect to an existing N2K network to provide real-time data on the network, including: Voltage, SoC, SoH, Time Remaining, and Current. Incluses N2K Adapter cable.
Features:
Learns and displays all critical battery parameters
Supports for all common battery chemistries and voltages
Intelligent, self-calibrating accuracy
Large, bright, color display
Expandable architecture
Includes Display Shunt Gateway
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
317.82 |
|
|
SmartShunt 350A - 12-48 VDC for SG200 Display
Add a SmartShunt for Additional Bank: Includes SmartShunt and SmartLink Com Cable
*Works with the SG200 display and or Bluetooth Gateway sold separately. One is needed for Programming.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
135.40 |
|
|
BM100 Battery Monitoring Solution
The BM100 is a complete system comprising SmartShunt and the veKonvert NMEA 2000 interface. It is part of Digital Yacht’s iSeaSense range of NMEA 2000 boat instruments. With this solution, your multi-function display becomes a sophisticated battery and energy management system.
Features
Digital Yacht’s BM100 battery monitoring system allows highly accurate DC voltage, current, and capacity measurements, enabling reliable monitoring of your boat’s battery and electrical system.
Core to the system is the SmartShunt. It measures battery voltage and current. Based on these measurements, it intelligently calculates the battery’s state of charge and the time to depletion for the remaining charge. It also keeps track of historical data, such as the deepest discharge and average discharge current, as well as the number of charge and discharge cycles. The smart shunt can also monitor the voltage of a 2nd battery, typically dedicated to engine starting.
The product is a collaboration between Victron Energy and Digital Yacht. The system utilizes Victron’s proprietary VE.Direct data connectivity as a source for the NMEA 2000 data.
The BM100 is part of a wider group of products now introduced by Digital Yacht that bring NMEA 2000 connectivity to Victron systems using the VE.Direct interface.
Victron solar panel controllers (MPPTs) and battery monitors can now also interconnect to NMEA 2000 via the veKonvert interface.
Monitoring the battery with the BM100 will give important feedback to the user so that remedial measures can be taken when necessary. Doing this will extend battery life. There’s also an optional battery temperature sensor available.
The BM100 can also integrate with Digital Yacht’s other NMEA 2000 and wireless instruments, which offer hybrid NMEA 2000 and wireless display options.
NMEA 2000 Interface
The system features an NMEA 2000 interface, so your navigation multi-function display or plotter can display all key parameters. Modern MFDs from leading manufacturers such as Garmin, Raymarine, Furuno, and Navico allow electrical battery data to be displayed via their NMEA 2000 interface. Alarms and alerts for low capacity and voltage can also be enabled.
Bluetooth Interface
The BM100 also has a standalone wireless Bluetooth interface, so your mobile phone or iPad can connect and display current, voltage, capacity, additional historical data, state of charge information, and time to go based on remaining battery capacity.
Specifications:
BM100 solution comes as a complete package with SmartShunt and the veKonvert NMEA 2000 interface
Bluetooth interface for setup and detailed analysis, including charge/discharge cycles, state of charge, remaining capacity, and historical data
Use your phone/tablet and your NMEA 2000 devices for battery monitoring and management
500A SmartShunt included for the main battery system
Monitor the voltage of a separate (eg starter) battery
Universal NMEA 2000 gateway for Victron’s popular range of smart battery monitors/SmartShunt using the VE.Direct interface (see compatibility list in the FAQ tab)
Enables electrical and battery monitoring and management on compatible multi-function displays (Raymarine, Garmin, Navico, Furuno, etc)
Provides battery voltage, charge/discharge current, state of charge, and time to depletion based on a sophisticated algorithm
Easy installation, plug ‘n play connectivity, and self-powering from the NMEA 2000 bus
Supports alerts generated by the SmartShunt
Supports multiple SmartShunts for multi-battery systems
Also compatible with other VE.Direct products such as solar MPPT controllers
Vekonvert Is Compatible with the Following Victron Products:
BMV -700, BMV -702, BMV -700H, BMV-712 Smart, BMV-710H Smart, BMV-712 Smart Rev2, SmartShunt 500A/50mV, SmartShunt 1000A/50mV, SmartShunt 2000A/50mV, and All MPPT Charge Controllers
NOTE: veKonvert is not compatible with Victron Chargers and Inverters. It should also not be plugged into the VE.Direct interfaces of any Victron "Consumers" such as Multiplus, Quattro, Cerbo, etc.
|
335.95 |
|
|
Axiom XL 16 15.6" Multifunction Display Kit with RCR-SD, Alarm & Cable
The Axiom XL range is the pinnacle of Raymarine navigation and modern helm integration.
Designed for glass bridge installations, Axiom XL displays offer superior performance, large format visibility and elegant simplicity. Engineered to perform in extreme conditions, the fully waterproof Axiom XL family of glass bridge MFDS can be installed in both open cockpits and enclosed bridge stations. Each model uses in-plane switching technology (IPS) and Raymarine optical bonding to deliver wider viewing angles, sharp contrast, and unmatched readability in bright sun.
Flagship Performance
At the heart of each Axiom XL display is a blazing fast quad core processor that delivers a responsive and powerful all-in-one big screen navigation experience. Axiom XL brings together multiple technologies and sensors into single or multi display helm solution. Integrate Axiom XL with additional Axiom XL displays or connect seamlessly with Raymarine’s family of Axiom and Axiom Pro displays at remote stations.
Superior Integration
A powerful network and video integration platform, Axiom XL displays feature three Ethernet ports for connecting radar, CHIRP and 3D sonar modules, plus additional Axiom family displays. FLIR thermal camera support enhances awareness and HDMI input enables Axiom XL to serve as a remote PC or entertainment display.
Elegant Simplicity
Axiom XL displays are powered by Raymarine’s LightHouse 3 OS and offer a fast, fluid, and uncluttered interface that is easily personalized for your navigation style. Enjoy multi-touch screen control or add the Raymarine RMK-10 keypad for complete remote system.
Features:
Smart and Rugged All-Glass Display is optimized for flush or surface mounting and features sleek buttonless design with swipe-to-power touch control. A built-in ambient light sensor automatically adjusts display brightness based on lighting conditions.
Connect Even More with LightHouse Apps. Expand the power and capabilities of Axiom XL by streaming mobile entertainment apps and connect with leading marine technology partners like Seakeeper, Mazy and Luminshore.
Keep Watch on the crew or engine room with marine video cameras. Connect both analog and video over IP to view 4 simultaneous video streams. Built in recording capability transforms Axiom XL into an onboard DVR.
Access Axiom Everywhere using Axiom XL’s HDMI video output. Monitor Axiom from the big screen below deck or stream Axiom XL to your phone or tablet with Raymarine mobile apps.
Vessel Automation with Raymarine Digital Switching solutions for boat builders. Axiom XL Digital Switching technology offers simple touch screen control of onboard electrical devices.
Get Underway Faster with the intuitive LightHouse 3 OS. Spend seconds, not minutes, plotting your next course. LightHouse 3 is easy to learn and easy to customize.
Elevate Awareness with Quantum 2 CHIRP radar and Doppler target tracking, the easier way to keep a watchful eye on potentially dangerous targets.
An Extra Set of Eyes for safer navigation with FLIR ClearCruise™ thermal object recognition. Let Axiom XL and FLIR be your sixth sense on the water so you can navigate safer, both night and day.
Ready to Fish with the optional RVX1000 remotely mounted 3D CHIRP sonar module. Experience Raymarine CHIRP sonar and award winning RealVision™ 3D on the big the screen.
Bring your computer to the helm. Axiom XL lets captains view and control a remote personal computer using a computer’s HDMI output and USB touch screen control.
Navigate with the Best Charts from Navionics, C-MAP, and Raymarine’s library of LightHouse raster and vector charts from leading map makers.
Stay on Course with advanced Evolution autopilot integration. Plot a waypoint on Axiom XL and let Evolution’s 9-axis intelligent sensor keep you on the perfect course.
|
5015.99 |
|
|
Multifunction Indoor RGB LED Controller with Buttons & RF Remote 5/12/24 VDC
RF Mini RGB Transmitter/Receiver allows for affordable control of constant voltage LED products such as Strip LED Lights. It utilizes the 433Mhz wireless frequency. Easy connection, compact size and simple control make this a great choice.
Specifications:
Input Voltage: 5 / 12VDC
Output current: 72W Max / <2A*3CH(each circuit)
Output Power: 5V:<30W, 12V:<72W
Static power consumption: <0.5W
Environment: IP20 Indoor only
Working temperature: -20°-60°C
|
18.95 |
|
|
XKA Stainless Steel Trim Tab Kit with Rocker Switch - 9 x 12
The Lectrotab stainless steel trim tab design provides unmatched strength and reliability. All stainless steel tabs are fabricated with a continuous rolled and pinned hinge. This design eliminates the need for welding.
Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat.
Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates either a standard or low profile transom mounting bracket.
Lectrotab's new flat rocker switch has improved sealing to prevent water entry and recessed rocker to prevent breaking. Specially designed to provide and "instant stop" circuit when the switches are released, thus preventing actuator over-run.
Features:
Continuous rolled and pinned hinge provides added strength and eliminates the need for welding
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
Actuators are fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Trim Tab Size (L x W) - 9" x 12" (23 x 30 cm)
Boat Length - 16' to 25' (5 to 7.5 M)
Trim Tab Material - 12 gauge, 304 Stainless Steel
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Rocker Switch Dimensions (W x H) - 3.125" x 3.25" (79.4 x 82.5 mm)
Rocker Switch Mounting Hole Cutout (H x W) - 2.25" x 2" (57.5 x 50 mm)
Rocker Switch Operating Voltage - 12 or 24 V
In the Box:
One (1) Flat Rocker Switch
Two (2) Stainless Steel tabs
Two (2) actuators w/23' (7 M) cables
Instruction Manual
*Sold as a Kit
|
745.73 |
|
|
XKA Aluminum Alloy Trim Tab Kit with Rocker Switch - 9 x 12
The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats. All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge. All Aluminum tabs are sealed with a corrosion resistant epoxy coating.
Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat.
Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates either a standard or low profile transom mounting bracket.
Lectrotab's new flat rocker switch has improved sealing to prevent water entry and recessed rocker to prevent breaking. Specially designed to provide and "instant stop" circuit when the switches are released, thus preventing actuator over-run.
Features:
All Tabs sealed with a corrosive resistant epoxy coating
Equivalent strength to 10 gauge stainless steel
"No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
Actuators are fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Trim Tab Size (L x W) - 9" x 12" (23 x 30 cm)
Boat Length - 16' to 25' (5 to 7.5 M)
Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Rocker Switch Dimensions (W x H) - 3.125" x 3.25" (79.4 x 82.5 mm)
Rocker Switch Mounting Hole Cutout (H x W) - 2.25" x 2" (57.5 x 50 mm)
Rocker Switch Operating Voltage - 12 or 24 V
In the Box:
One (1) Flat Rocker Switch
Two (2) Aluminum Alloy tabs
Two (2) actuators w/23' (7 M) cables
Instruction Manual
*Sold as a Kit
|
709.48 |
|
|
BMV-700H High Voltage Battery Monitor (60-385VDC)
The BMV-700H is a high-precision battery monitor that has been specially designed for systems with a high battery voltage ranging from 60 to 385 volts.
These battery monitors calculate the state of charge of a battery and keep track of the ampere-hours consumed from the battery by integrating the current flowing in or out of the battery.
They both come with a round head unit, a square bezel overlay, a screw ring for mounting, a 10m UTP RJ12 cable, a fused power supply cable, and a 500 A/50 mV shunt. Because of the high voltage application, the shunt is housed in a special enclosure.
Battery ‘fuel gauge’, time-to-go indicator, and much more
The remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature, and the age of the battery. Complex software algorithms are needed to take all these variables into account.
Next to the basic display options, such as voltage, current, and ampere-hours consumed, the BMV-700 series also displays the state of charge, time to go, and power consumption in Watts.
Easy to Install
All electrical connections are to the quick-connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ12 cable (10m) and battery cable with fuse (2m); No other components are needed.
Also included is a separate front bezel for a square or round display appearance and a securing ring for the rear mounting and screws for the front mounting.
BMV-700H: 60 to 385 VDC Voltage Range
No additional parts are needed. Note: This is suitable for systems with grounded negative only (the battery monitor is not isolated from the shunt).
Features:
Battery voltage, current, power, ampere-hours consumed, and state of charge
Remaining time at the current rate of discharge
Programmable visual and audible alarm
Programmable relay, to turn off noncritical loads or run a generator when needed
500 Amp quick connect shunt and connection kit
Shunt selection capability up to 10,000 amps
VE.Direct communication port
Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
Wide input voltage range: 6.5 – 95V
High current measurement resolution: 10 mA (0.01A)
Low current consumption: 2.9Ah per month (4mA) @12V and 2.2Ah per month (3mA) @ 24V
BMV-700H Specifications:
Supply Voltage Range: 60 – 385 VDC
Current Draw, Back Light Off: < 4mA
Input Voltage Range, Auxiliary Battery: n. a.
Battery Capacity (Ah): 1 - 9999 Ah
Operating Temperature Range: -40 +50°C (-40 - 120°F)
Measures Voltage of Second Battery, or Temperature, or Midpoint: No
Temperature Measurement Range: n. a.
VE.Direct Communication Port: Yes
Relay: 60V / 1A normally open (function can be inverted)
Resolution & Accuracy (with a 500 A shunt):
Current: ± 0.01A
Voltage: ± 0.01V
Amp Hours: ± 0.1 Ah
State of Charge: (0 – 100%) ± 0.1%
Time to Go: ± 1 min
Temperature: n. a.
Accuracy of Current Measurement: ± 0.4%
Accuracy of Voltage Measurement: ± 0.3%
Installations & Dimensions:
Installation: Flush mount
Front: 63mm diameter
Front Bezel: 69 x 69 mm (2.7 x 2.7 inch)
Shunt Connection Bolts: M10 (0.3937 inches)
Body Diameter and Depth: 52 mm (2.0 inch) and 31 mm (1.2 inch)
Protection Category: IP55 (not intended for outdoor use)
Standards:
Safety: EN 60335-1
Emission / Immunity: EN 55014-1 / EN 55014-2
Automotive: ECE R10-4 / EN 50498
Accessories:
Shunt (included): 500A / 50mV
Cables (included): 10 meters 6 core UTP with RJ12 connectors, and cable with 1Amp slow blow fuse for ‘+’ connection
Temperature Sensor: Optional (ASS000100000)
Please contact your dealer for any returns, repairs, or support issues related to this product.
Please contact your dealer for any returns, repairs or support issues related to this product.
|
607.92 |
|
|
BMV-710H Smart High Voltage Battery Monitor (60-385VDC)
The BMV-710H Smart has Bluetooth built-in and can connect wirelessly to your phone (or tablet) via the VictronConnect App to conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
This battery monitor can calculate the state of charge of a battery and keep track of the ampere hours consumed from the battery by integrating the current flowing in or out of the battery.
The monitor comes with a round head unit, a square bezel overlay, a screw ring for mounting, a 10m UTP RJ12 cable, a fused power supply cable, and a 500 A/50 mV shunt. Because of the high voltage application, the shunt is housed in a special enclosure.
Battery ‘fuel gauge’, time-to-go indicator, and much more
The remaining battery capacity depends on the ampere-hours consumed, discharge current, and temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account.
Next to the basic display options, such as voltage, current, and ampere-hours consumed, the BMV-700 series also displays the state of charge, time to go, and power consumption in Watts.
Bluetooth Smart
Use the Bluetooth Smart dongle to monitor your batteries on Apple or Android smartphones, tablets, Macbooks and other devices.
Easy to Install
All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ12 cable (10m) and battery cable with fuse (2m); No other components are needed.
Also included are a separate front bezel for a square or round display appearance and a securing ring for the rear mounting and screws for the front mounting.
Easy to Program (with your smartphone!)
A quick install menu and a detailed setup menu with scrolling texts assist the user when going through the various settings.
Alternatively, choose the fast and easy solution: Download the smartphone app (Bluetooth Smart Dongle needed)
Features:
Battery voltage, current, power, ampere-hours consumed, and state of charge
Remaining time at the current rate of discharge
Programmable visual and audible alarm
Programmable relay, to turn off non critical loads or run a generator when needed
500 Amp quick connect shunt and connection kit
Shunt selection capability up to 10,000 amps
VE.Direct communication port
Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
Wide input voltage range: 6.5 – 95V
High current measurement resolution: 10 mA (0.01A)
Low current consumption: 2.9Ah per month (4mA) @12V and 2.2Ah per month (3mA) @ 24V
BMV-710H Specifications:
Supply Voltage Range: 60 – 385 VDC
Current Draw, Back Light Off: < 4mA
Input Voltage Range, Auxiliary Battery: n. a.
Battery Capacity (Ah): 1 - 9999 Ah
Operating Temperature Range: -40 +50°C (-40 - 120°F)
Measures Voltage of Second Battery, or Temperature, or Midpoint: No
Temperature Measurement Range: n. a.
VE.Direct Communication Port: Yes
Relay: 60V / 1A normally open (function can be inverted)
Resolution & Accuracy (with a 500 A shunt):
Current: ± 0.01A
Voltage: ± 0.01V
Amp Hours: ± 0.1 Ah
State of Charge: (0 – 100%) ± 0.1%
Time to Go: ± 1 min
Temperature: n. a.
Accuracy of Current Measurement: ± 0.4%
Accuracy of Voltage Measurement: ± 0.3%
Installations & Dimensions:
Installation: Flush mount
Front: 63mm diameter
Front Bezel: 69 x 69 mm (2.7 x 2.7 inch)
Shunt Connection Bolts: M10 (0.3937 inch)
Body Diameter and Depth: 52 mm (2.0 inch) and 31 mm (1.2 inch)
Protection Category: IP55 (not intended for outdoor use)
Standards:
Safety: EN 60335-1
Emission / Immunity: EN 55014-1 / EN 55014-2
Automotive: ECE R10-4 / EN 50498
Accessories:
Shunt (included): 500A / 50mV
Cables (included): 10 meter 6 core UTP with RJ12 connectors, and cable with 1Amp slow blow fuse for ‘+’ connection
Temperature Sensor: Optional (ASS000100000)
Please contact your dealer for any returns, repairs or support issues related to this product.
Please contact your dealer for any returns, repairs or support issues related to this product.
|
636.48 |
|
|
Regulator Kit for Valeo with MC-618
Balmar's MC-618 Regulator communicates with the SG200 Battery Monitor to provide information to the SG200 Color Display and Smartphone App. Now you can see how the MC-618 Regulator is directing your onboard charging activity from either the SG200 2" Color Display and/or the optional Bluetooth Smartphone App. Basic setup functions can be accomplished from the SG200 Color Display, Smartphone App, or the traditional on-regulator programming tool. Advanced Programming functions are available from the Bluetooth Smartphone App. Balmar customers have been asking for years to view regulator information from outside the engine compartment. Balmar has accomplished this goal without the need for a separate dedicated display device!
Kit Includes:
30-SR12-02 Internal Smart Ready® Regulator Conversion Kit
MC-618 External Regulator
Wire Harness
MC-TS-A & MC-TS-B Temp Sensors
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
524.51 |
|
|
Max Charge MC618 Multi-Stage Regulator without Harness - 12V
Balmar's MC-618 Regulator communicates with the SG200 Battery Monitor to provide information to the SG200 Color Display and Smartphone App. Now you can see how the MC-618 Regulator is directing your onboard charging activity from either the SG200 2" Color Display and/or the optional Bluetooth Smartphone App.
Basic setup functions can be accomplished from the SG200 Color Display, Smartphone App, or the traditional on-regulator programming tool. Advanced Programming functions are available from the Bluetooth Smartphone App. Balmar customers have been asking for years to view regulator information from outside the engine compartment. Balmar has accomplished this goal without the need for a separate dedicated display device!
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
302.46 |
|
|
CANNS500 Digital Battery Monitoring Shunt
Keep Your Battery Health In Check
Boating should be easy and carefree. And with the VETUS CANNS500 shunt, you are one knot closer to a light-hearted summer afternoon on board your electric-powered boat. Specially designed to keep track of your battery dataset, the VETUS CANNS500 Digital Battery Monitoring Shunt will give you that so-desired, worry-free stay on the water.
A Know-It-All Solution For Battery Readout
Wi-Fi equipped, the VETUS CANNS500 shunt enables you to keep a close eye on the percentage state of charge left in your batteries, as well as power consumption and the estimated remaining boating time. When in range, just connect your smartphone, tablet, or laptop to the CANNS500 shunt to get real-time information on your battery bank.
Features:
Easy Wi-Fi-connected monitoring with your smartphone, tablet, or laptop
Can be connected to an onboard NMEA 2000 network
Compatible with CANNME7 VETUS display
Suitable for various voltages (12, 24, 36, and 48 VDC)
Suitable for currents up to 500 A continuous
Real-time battery data readout
Integrated sensors for highly accurate reading and timely warning when monitoring an external device
Monitor the temperatures and block voltages of up to 4 batteries in 1 battery-bank
Compatible with multiple battery types, such as AGM, gel, deep-cycle flooded, and lithium LiFePO4
3 Year Warranty
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
659.47 |
|