|
Spectator 12 x 50 Binocular
Bushnell Spector sport binoculars, 12x50mm. Features: - keeps distant objects in focus, eliminating need for constant adjustment - four color tiles included to customize your binocular - waterproof construction - Nitrogen purge - lead free glass - multi coated optics. Specifications: - magnification: 12x50mm - Prism system: porro - Prism glass: BaK-4 - field of view at 1000 yards: 265' - close focus: 200' - exit Pupil: 4.20mm - eye relief: 11mm - eyecups: twist-up - length: 6.30 inch - weight: 31 oz - finish: black
Features:
Keeps distant objects in focus, eliminating need for constant adjustment
Four color tiles included to customize your binocular
Waterproof construction
|
97.14 |
|
|
Spectator 10 x 50 Binocular
Spectator Sport 10 x 50 mm. Binoculars are designed to see all the action right out of the box. PermaFocus technology brings distant objects close with no adjustments necessary. The rugged armor housing is waterproof, handling all outdoor activities and perfect for boating. Four included color tiles can customize your binoculars to support your favorite teams. Action happens fast, whether you're at the soccer field or the stadium. Bushnell Spectator Sport binoculars are designed to see it all.
Features:
10 x 50mm
Porro prism
Fully multicoated lenses
PermaFocus keeps distant objects in focus
Water, rain and fog-resistant
|
86.92 |
|
|
Marine
Built to withstand extreme nautical environments. And float in them. We suggest you keep them on board, but made our Marine™ series binoculars buoyant, waterproof and corrosion resistant, so a little dunking won't deep-six your day. You'll appreciate the ultra-bright, crisp views granted by their multi-coated optics and premium BaK-4 prism glass. Rugged rubber armoring provides a sure grip, absorbs shock and keeps them from sliding in rough conditions. They're essential equipment if you spend much time on deck, and aren't fazed by a little time off it.
Features
BaK-4 porro prisms for bright, clear, crisp viewing
Fully Multi-coated optics for superior light transmission and brightness
100% waterproof / fogproof
O-ring sealed and nitrogen-purged to keep out moisture
Highly resistant to saltwater corrosion
Non-slip, non-skid rubber armor cushions bumps and shock, prevents sliding and provides a firm grip when wet
Hermetically sealed
Fold-down eyecups
|
210.47 |
|
|
Marine
Built to withstand extreme nautical environments. And float in them. We suggest you keep them on board, but made our Marine™ series binoculars buoyant, waterproof and corrosion resistant, so a little dunking won't deep-six your day. You'll appreciate the ultra-bright, crisp views granted by their multi-coated optics and premium BaK-4 prism glass. Rugged rubber armoring provides a sure grip, absorbs shock and keeps them from sliding in rough conditions. They're essential equipment if you spend much time on deck, and aren't fazed by a little time off it.
Features
BaK-4 porro prisms for bright, clear, crisp viewing
Fully Multi-coated optics for superior light transmission and brightness
100% waterproof / fogproof
O-ring sealed and nitrogen-purged to keep out moisture
Highly resistant to saltwater corrosion
Non-slip, non-skid rubber armor cushions bumps and shock, prevents sliding and provides a firm grip when wet
Hermetically sealed
Fold-down eyecups
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
160.36 |
|
|
Venture Folding Roof Prism Binocular - 10 x 50
Hunters can wait hours or even days for an opportunity of a lifetime. Specifically designed for hunters and outdoor enthusiasts, Simmons® Venture™ binoculars will make sure you're ready when this chance presents itself. Fully multi- coated lenses transmit the maximum amount of light, revealing the finest of details even at first and last light when game is most active.
Available in five configurations, Simmons® Venture™ binoculars can go anywhere arming you with quality optics when you need it most.
Features:
Finish: Black
10 x 50
Porro
BK7
Fully Multi Coated
Field of View: 325' at 100 yards/99.06M at 100M
Eye Relief: 15.24mm
Exit Pupil: 4mm
Short Focus: 9m
Waterproof/Fogproof: No
Adapt to Tripod: Yes
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
63.59 |
|
|
Hustler® - Right Hand - Aluminum Propeller - H2-1210 - 3-Blade - 12" x 10.5 Pitch
Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.
The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.
Squeeze Cast for Added Strength
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.
Long Lasting Ultracoat™ Powder Coated Finish
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.
Large Free Flowing Exhaust Ports
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.
WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
78.37 |
|
|
Hustler® - Right Hand - Aluminum Propeller - H1-1210 - 3-Blade - 12" x 10.5 Pitch
Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.
The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.
Squeeze Cast for Added Strength
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.
Long Lasting Ultracoat™ Powder Coated Finish
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.
Large Free Flowing Exhaust Ports
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.
WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
71.09 |
|
|
Tough-Ball™ with 1/4"-20 x .50" Threaded Stud
The RAP-B-379U-252050 consists of a 1" diameter rubber ball, connected to a 1/4"-20 X .50" male threaded post. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera.
U.S. Standard Thread Diameter and Pitch Option:
1/4"-20 X .50"
Material:
High Strength Composite & Steel
Ball Size:
B Size 1" Rubber Ball
Note:
The "U" in the part number reflects product packaged in poly bag.
|
8.20 |
|
|
SailPod Pre-Cut for Simrad NSS9 evo3 & B & G Zeus3 9 for 12″ Wide Guard
SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips… “Where you need it, when you need it.” SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above it on the straight section.
Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.
Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!
Commitment to Quality – NavPod stands behind their commitment by offering a 10-year warranty on all new Gen3 NavPods.
|
392.71 |
|
|
SailPod Pre-Cut for Simrad GO12 XSE, GO12 XSR & B & G Vulcan 12R for 12″ Wide Guard
SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your fingertips… “Where you need it when you need it.” SailPods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above it on the straight section.
Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal – All SailPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SailPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The gasket will continue to do its job.
Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!
Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.
|
392.71 |
|
|
RAM® Tough-Ball™ B Size with 3/8”-16 x .375” Threaded Stud
The RAM tough ball consists of a 1" diameter rubber ball that is connected to a 3/8"-16 x .375" male threaded post.
Features:
RAM® Tough-Ball™ features a 3/8"-16 x .375" male threaded post for connection to a variety of devices
Included B size 1" RAM® rubber balls allow for connection to any B size RAM® double socket arm; ball and socket technology allows for near infinite adjustability
Made of high-strength composites with stainless steel thread posts for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Thread Pitch: 3/8"-16 x .375"
Ball Size: B Size (1")
Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb
Materials: High-strength composite and stainless steel threads
Packaging Type: Polybag
Weight: 0.1 lbs
|
9.56 |
|
|
GP2050-10 SailPod Pre-Cut for Simrad NSE8 or B&G Zeus Z8 for 12" Wide Guard
GP2050 Series for 12" Guard, SailPods for Sail are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.
SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.
Sizing:
Overall Size: 10.875"H x 15.125"W x 6.75"D
Usable Face: 8.75"H x 12.75"W x 5"D
Max Cutout: 8.375"H x 12.375"W
All SailPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners and wrench
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
|
392.71 |
|
|
GP2050-13 SailPod Pre-Cut for Simrad NSS9 evo2 or B&G Zeus² 9 for 12" Wide Guard
GP2050 Series for 12" Guard, SailPods for Sail are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.
SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.
Sizing:
Overall Size: 10.875"H x 15.125"W x 6.75"D
Usable Face: 8.75"H x 12.75"W x 5"D
Max Cutout: 8.375"H x 12.375"W
All SailPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners and wrench
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
|
392.71 |
|
|
12" x 18" Deluxe Sewn 50 Star Flag
These deluxe sewn flags are constructed from lightweight yet durable fade resistant polyester fabric, which make them the perfect all-weather flags.
Features:
Individually Sewn Stripes
Embroidered Stars
Brass Grommets
Four-Needle Flyend
|
23.39 |
|
|
BOLT 1212ED Electric - Edge Mount Limited Space Trim Tab Kit - 12V - 12" x 12"
Designed with an adjustable upper hinge for transoms with limited vertical space. Tabs turn up for added strength and feature piano-hinged backing plates.
Kits Include:
(2) 12-volt adjustable upper hinge actuators with 6' wire harnesses and waterproof connectors (BEA3000)
(2) Stainless steel trim planes (tabs) and mounting plates
(2) 20' wire harnesses with waterproof connectors (BAW2020)
Features:
Requires less than 6.5" of vertical transom space to install
Superior seal design inspired by over 50 years of Bennett’s proven success in actuator manufacturing excellence
Controls sold separately
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
520.09 |
|