Float-a-Pump Flotation Sleeve Add a Float-A-Pump Sleeve (FPS-3R) to provide positive flotation in case the pump slips overboard. This bright red sleeve slides over the foot onto the pump body, providing high visibility as well as flotation. Fits 124, 136 and 300 series pumps. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

"Off the Boat" Rock Strainer This strainer replaces the existing foot on the pump and prevents small rocks from damaging the foot valve. Fits 124, 136 and 300 series pumps. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Intake Extension Hose Designed to extend the intake reach of the 124, 136 and 300 series pumps. Use the intake hose to pump out hard to see or reach areas. Comes with bilge strainer to prevent clogging. Makes difficult pumping jobs easier. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Intake Extension Hose Designed to extend the intake reach of the 124, 136 and 300 series pumps. Use the intake hose to pump out hard to see or reach areas. Comes with bilge strainer to prevent clogging. Makes difficult pumping jobs easier. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Scot Pump 189-001-124 Strner Flg Adptr X 1.5M Npt

Micropump DG-F61.G1S2P5.J.B I Drive Motor J Mount Micropump Brushless DC I-Drive

Jabsco 10487-0010 Pump Shaft SHAFT FOR 2" PUMP 18370 Replacement shaft for 11470 series pumps. Steel construction.   Image is representation only of this shaft.

Sea Kayak Pump w/Float-a-Pump Sleeve Designed specifically with the Sea-Kayaker in mind, this upgraded version of our popular Canoe Pump includes an aluminum reinforcing shaft which prevents the pump shaft from flexing in a rolling sea and won't affect a compass. A hose can be added for extended discharge. The installed Float-a-Pump provides positive flotation for pumps dropped overboard. Features: Diameter: 1-3/4" Length: 18" Strokes per Gallon: 8 strokes Gallon per minute: 8 gallons Mounting clips sold separately WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Tuthill 2C2EN-C-7 Pump 9Gpm W/Outer Bearing Cast Iron Rotary Gear Pump Pump End Only 8 GPM C Series Pump Cast Iron Construction NO motor Ball Bearing on Shaft Clockwise rotation only (from shaft end view) Inlet Port is 1 inch NPT Discharge Port is 1 inch NPT

Tuthill 3C2EN-C-7 Pump 18Gpm 1 1/4 W/Outr Brg Cast Iron Rotary Gear Pump Pump End Only, 17 GPM C Series Pump Cast Iron Construction Ball Bearing on Shaft Clockwise rotation only (from shaft end view) Inlet Port is 1-1/4 inch NPT Discharge Port is 1-1/4 inch NPT

Tuthill CCI102017 Pump W/Vtn Seal 56C Cast Iron Rotary Gear Pump Pump End Only, 20 GPM CC Series Pump Cast Iron Construction Nema frame size is 56C Inlet Port is 1-1/2 inch NPT Discharge Port is 1-1/2 inch NPT  

Tuthill 3C2EN-V-C-7 Pump 18Gpm 1 1/4 Ports Cast Iron Rotary Gear Pump Pump End Only 17 GPM  C Series Pump Cast Iron Construction Ball Bearing on Shaft Clockwise rotation only (from shaft end view) Inlet Port is 1-1/4 inch NPT Discharge Port is 1-1/4 inch NPT

JMP Marine 7136K Impeller Kit with Gasket & O'Ring Kit Includes: 7136-01 (Impeller) QTY:1 GAK0061 (Gasket) QTY:1     Impeller Dimensions & Specs: A (Impeller Dia) 57mm B (Impeller Width) 48.2mm C (Shaft Dia) 16mm No. of Blades: 12 Insert Type: Spline Drive(12)   Replacement and Equivalent to the following Impellers: Jabsco 13554-0001 Johnson 08-812B, 09-812B, 09-812B-110, 09-812B(T)-110 Volvo Penta 3588914, 3593660, 3595485, 3841696, 3842786, 21212794, 21213664, 21700443, 21951352, 21951354, 22307636 Yanmar 119773-42600-01, 119773-42600 Yamaha GTA-12457-00 Indmar 68-5007   JMP Marine Pump(s) Using This Impeller: JPR-CP25UH (Crank Mounted Replacement Pump) JPR-VP0030DA (Volvo Penta Replacement) JPR-VP0030DB (Volvo Penta Replacement) JPR-VP2799G (Volvo Penta Gasoline Series Pump Replacement) JPR-VP2800G (Volvo Penta Gasoline Series Pump Replacement) JPR-VP5090G (Volvo Penta Gasoline Series Pump Replacement) JPR-YM06LPA (Yanmar Replacement) JPR-YM06LPB (Yanmar Replacement)

Micropump GC-M25.PVS.F Pump Head F Mount Micropump 81378 GC-M25.PVS.F Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81378 constructed of Base Material 316SS, Gear Material PPS (carbon fiber/ptfe) and Shaft Material 316SS. Pump Series: GC Series Ports/Fittings: 3/8-18 (F) NPT Side Port Min Speed (RPM): 500 Max Speed (RPM): 4000 Max Pressure (psi): 1500 Min Temperature (°C): -29 Max Temperature (°C): 176.666666666667 Max Diff. Pressure (psi): 75 Displacement (ml/rev): 1.82 Design: Standard Design Gear Set: 0.750/2/20 (1.82 ml/rev) Gear Material: PPS (carbon fiber/ptfe) Static Seals: Viton® Base Materials: 316SS Drive Mount: MP Housing (220 Style) Bypass: No Driven: Ferrite Driving Magnet: Not Included High System Pressure: No Bushings: PPS Shafts: 316SS Gear Trim: None Model: GC-M25.PVS.F

Micropump GC-M35.PVS.F Pump Head F Mount Micropump 81379 GC-M35.PVS.F Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81379 constructed of Base Material 316SS, Gear Material PPS (carbon fiber/ptfe) and Shaft Material 316SS.