|
IBC320-12 Battery Charger
The IBC series chargers are fully Digital Signal Processor controlled and feature Universal Input Voltage from 85 to 265 VAC at 50 or 60 Hz with Active Power Factor Correction for the most efficient use of AC power.
Four charging profiles are available with easy front panel selection to handle most types of batteries from traditional Lead Acid, Sealed Lead Acid and even Lithium Ion.
The free to download ‘Power Wizard’ software allows full programming and selection of each of the four profiles from a laptop computer. 300 and 1000 Watt models for 1 or 2 banks of 12, 24, 28, 32, 36 or 48 Volt batteries.
Features:
Digital Signal Processor controlled
Computer programmable
Temperature compensation
Easy connection for one or two battery banks
Universal worldwide AC input
Simple front panel controls
Digital Display of Voltage and Current (lengthens chassis)
High Vibration Rugged Duty
Dry Contact Output Fail Relay
Carrying Handle
Canbus / RS232 / Remote Control port
Five year parts and labour warranty
|
721.27 |
|
|
2-Bank Battery Isolator, 200A, 40V
Analytic Systems introduces the IBI (Ideal Battery Isolator) for 1, 2 and 3 bank battery systems, allowing all the batteries to be fully charged from a single alternator while maintaining electrical
isolation between the battery banks or between a vehicle and trailer.
Ideal Diode technology uses MosFet Transistors and control circuitry to replace the diode used in a traditional battery isolator and reduces the voltage drop across the isolator to a mere 160 millivolts at 200 Amps of charging current and essentially zero volts at low current, so all the power of the alternator is applied to the batteries ensuring a full recharge every time.
While the Ideal Battery Isolator is designed to be used with an alternator, it can also be used to convert a single bank battery charger to a 2 or 3 bank charger or as a pure diode between a vehicle and trailer or other remote load.
Features:
Waterproof Expoxy Sealed Construction
Easy Connection
Alternator/Charger post 5/16", Battery Post 1/4"
Most Efficient use of Available Alternator Output
Maximize Battery Performance
Three year parts and labour warranty
|
273.55 |
|
|
Single Bank Battery Isolator, 200A, 40V
Analytic Systems introduces the IBI (Ideal Battery Isolator) for 1, 2 and 3 bank battery systems, allowing all the batteries to be fully charged from a single alternator while maintaining electrical
isolation between the battery banks or between a vehicle and trailer.
Ideal Diode technology uses MosFet Transistors and control circuitry to replace the diode used in a traditional battery isolator and reduces the voltage drop across the isolator to a mere 160 millivolts at 200 Amps of charging current and essentially zero volts at low current, so all the power of the alternator is applied to the batteries ensuring a full recharge every time.
While the Ideal Battery Isolator is designed to be used with an alternator, it can also be used to convert a single bank battery charger to a 2 or 3 bank charger or as a pure diode between a vehicle and trailer or other remote load.
Features:
Waterproof Expoxy Sealed Construction
Easy Connection
Alternator/Charger Post 5/16", Battery Post 1/4"
Most Efficient use of Available Alternator Output
Maximize Battery Performance
Three year parts and labour warranty
|
219.74 |
|
|
XPLORE Battery Charger - 12V - 120 Amp - 6-Bank
The XPLORE 120/12 battery charger is the largest and most powerful charger on the market today. The universal, auto-ranging AC input and 120 amps of output current ensure ultra-fast and reliable worldwide charging. With up to six output banks of simultaneous charging combined with the ability to charge two battery banks with differing chemistries, the XPLORE 120/12 eliminates the need to have separate single-chemistry chargers and minimizes installation and wiring costs for your house bank and engine bank.
It is also equipped with an easy-to-read front panel LED display for basic configuration and status information. Advanced monitoring and configuration are enabled by NMEA 2000 protocol or Xantrex app using the Xantrex BLE module.
Performance Features:
6 Battery Banks and Dual-Chemistry Charging
Xantrex Lithium and Custom Battery Charging
NMEA 2000 Connectivity
Xantrex App Connectivity
Auto-ranging universal input voltage (80-265 Vac, 45-65 Hz)
Power Share: automatically reduces charging output to prevent nuisance tripping of the AC input breaker.
Quiet Mode: when enabled, the internal fan is turned off and the charger operates at a reduced output when quietness is needed.
Storage Mode: automatically refreshes your batteries once every several days of non-use to ensure optimal battery condition.
Dead Battery Charging: the ability to charge a battery as low as 0V back to full-charge
Protection Features:
Reverse battery polarity protection
Drip-proof design
Over and under-temperature protection
DC over-voltage protection
Battery overcharging protection
|
1455.16 |
|
|
Mass 24/25-2 25 AMP 24V Battery Charger
The right choice for demanding conditions
Mass battery chargers are designed for the toughest conditions for professional, semi-professional, and recreational purposes. Even under the most extreme conditions, the products from the Mass series operate faultlessly, giving you round-the-clock output when necessary. The sustainability and technologies underpinning the Mass concept have long been proven. With an MTBF of 180,000 hours at full capacity and 24/7 use, the Mass products are ideal for the toughest tasks and any situation that requires a reliable power supply.
Powerful selling points:
Designed for the most difficult conditions.
Lightweight, stainless steel, anodized aluminum casing.
Coating of internal components prevents damage from dampness or condensation to ensure a longer lifespan.
Insensitive to electromagnetic effects from other devices.
Suitable for every type of battery, it also charges flat batteries.
It is delivered as standard with a temperature sensor.
Full power at temperatures of up to 45 degrees.
Load capacities from 80 to 1000 Ah or more.
Stable and ripple-free power supply, even without batteries.
The Current Control function prevents the breakdown of fuses when the voltage drops.
Parallel switching is possible using multiple battery chargers.
Connections in accordance with CE, ABYC A-31 and IEC60945.
GMDSS models and panels available.
Certified by RRR, RMRS (does not apply to 24/75 120 V).
Certified by DNV GL (only 24/25, 24/50, 24/75, 24/75 (120 V), 24/100 models).
GMDSS Compatible
The Mass series are designed for the most demanding situations. To help you comply with SOLAS regulations, all Mass battery chargers are GMDSS compatible. GMDSS stands for Global Maritime Distress and Safety System and allows users to monitor various alarm functions. GMDSS versions of the Mass 24/25 DNV, Mass 24/50, Mass 24/75, Mass 24/100, and Mass 24/100-3ph are available.
A separate remote panel is available, which is compatible with all Mass battery chargers.
A single front display with GMDSS remote panel is available for:
Mass 24/25-2 DNV
Mass 24/50-2
Mass 24/75, Mass 24/100, Mass 24/100-3ph
Charging Lithium Ion batteries
Although Lithium Ion batteries are increasingly popular, there can be a lack of clarity when it comes to the charging process. This is not a problem with Mastervolt as the Mastervolt battery chargers communicate directly with the Lithium Ion battery via the integrated MasterBus (or have been adapted to the required charging voltages).
MasterBus compatible
Mass battery chargers can be easily connected to a MasterBus network with only one cable and one connection. You can also choose central, local, or remote monitoring, configuration, and control of your system.
Made tough by smart design
The certified Mass battery chargers are very strong and designed to withstand heavy vibrations and shocks. Their premium quality components meet the highest possible specifications, while the smart and extra robust mounting adds to the professional end result.
Specifications:
Nominal output voltage: 24v
Total charge current: 25a at 28.5v
Number of battery outlets: 2
Charge current second output: 2a
Battery bank size: 50-250 ah
Nominal input voltage: 230v (180-265v), 50/60 Hz
Power supply mode: Yes
Galvanic isolation: Yes
Display/read-out: LED display
|
1141.13 |
|
|
24/75, 75A, 24V Battery Charger
The right choice for demanding conditions
Mass battery chargers are designed for the toughest conditions for professional, semi-professional, and recreational purposes. Even under the most extreme conditions, the products from the Mass series operate faultlessly, giving you round-the-clock output when necessary. The sustainability and technologies that underpin the Mass concept have long been proven in practice. With an MTBF of 180,000 hours at full capacity and 24/7 use, the Mass products are ideal for the toughest tasks and any situation that requires a reliable power supply.
Features:
Designed for the most difficult conditions.
Lightweight, stainless steel, anodized aluminum casing.
Coating of internal components prevents damage from dampness or condensation to ensure a longer lifespan.
Insensitive to electromagnetic effects from other devices.
Suitable for every type of battery, also charges flat batteries.
Delivered as standard with temperature sensor.
Full power at temperatures of up to 40.
Load capacities from 80 to 1000 Ah or more.
Stable and ripple-free power supply, even without batteries.
The Current Control function prevents the breakdown of fuses when the voltage drops.
Parallel switching is possible using multiple battery chargers.
Connections by CE, ABYC A-31, and IEC60945.
GMDSS models and panels are available.
Certified by RRR, RMRS (does not apply to 24/75 120 V).
Certified by DNV GL (only 24/25, 24/50, 24/75, 24/75 (120 V), 24/100 models).
GMDSS Compatible
The Mass series is designed for the most demanding situations. To help you comply with SOLAS regulations, all Mass battery chargers are GMDSS compatible. GMDSS stands for Global Maritime Distress and Safety System and allows users to monitor various alarm functions. GMDSS versions of the Mass 24/25 DNV, Mass 24/50, Mass 24/75, Mass 24/100, and Mass 24/100-3ph are available.
A separate remote panel is available, which is compatible with all Mass battery chargers.
A single front display with GMDSS remote panel is available for:
Mass 24/25-2 DNV
Mass 24/50-2
Mass 24/75, Mass 24/100, Mass 24/100-3ph
Charging Lithium Ion batteries
Although Lithium-ion batteries are increasingly popular, there can be a lack of clarity when it comes to the charging process. This is not a problem with Mastervolt as the Mastervolt battery chargers communicate directly with the Lithium Ion battery via the integrated MasterBus (or have been adapted to the required charging voltages).
MasterBus compatible
Mass battery chargers can be easily connected to a MasterBus network with only one cable and one connection. You can also choose central, local, or remote monitoring, configuration, and control of your system.
Made tough by smart design
The certified Mass battery chargers are very strong and designed to withstand heavy vibrations and shocks. Their premium quality components meet the highest possible specifications, while the smart and extra robust mounting adds to the professional result.
Specifications:
Nominal output voltage: 24 V
Total charge current: 75 A at 28.5 V
Number of battery outlets: 1
Battery bank size: 150-750 Ah
Nominal input voltage: 230 V (180-265 V), 50/60 Hz
Power supply mode: yes
Galvanic isolation: yes
Display/read-out: LED display
Dimensions, hxwxd: 420 x 318 x 130 mm, 16.5 x 12.5 x 5.1 inch
Weight: 7.7 kg, 17.0 lb
Compliance: CE, ABYC A-31, RRR, RMRS, DNV GL
|
2440.46 |
|
|
The ProNautic Battery Charger from ProMariner is an award-winning charger with features that define the future of marine battery charging. Recognized with the 2010 IBEX Innovation Award, the ProNauticP combines digitally controlled and software-based power conversion technology with global energy management features to deliver global wide range AC input and power factor correction. This allows models to operate off standard household power connections anywhere in the world. The chargers address the trend of using greater numbers of 12-volt electronics on board today's power, sail, cruising and sport fishing boats. Featuring dual digital display screens, the ProNauticP series makes it easy to view real-time charging voltage, amperage and percentage of power out information.
The ProNauticP charger automatically removes stress on a fully charged battery by incorporating a built-in conservation mode that reduces float voltage when the unit does not register a load greater than 5 amps over a 72-hour period and re-conditions batteries to improve battery life and reserve power performance every 21 days if in a storage state. ProMariner's Distributed-On-Demand Technology senses and distributes 100% of available charging to any one bank or a combination of all banks; all unused charging amps are distributed to batteries requiring them. The ProNauticP self-calculates absorption & conditioning time based on its ability to analyze the discharge state of the onboard battery banks and incorporates fully automatic temperature compensation as a standard feature on all models.
The revolutionary ProNautic battery chargers are now in stock at CLR Marine! Available in amperages ranging from 10 to 60 amps.
Specials Closeouts Remanufactured Rebates
|
|
|
Don't miss out on select ProMariner's ProSport Gen 3 Heavy-Duty On-Board Marine Battery Chargers on closeout now! These are on their way and will be in stock next week. Be sure to place your order today!
Specials Closeouts Remanufactured Rebates
|
|
|
Freedom 458 Inverter/Charger
AC Power Inverter with High Surge Capability, 3-Stage Charger
With filtered modified sine wave output, Freedom inverter/chargers run virtually anything, from electrical equipment to appliances and electronics in your RV. Temperature controlled multistage charging ensures that your batteries are recharged quickly, and automatic shutdown and other safety features protect your expensive deep-cycle batteries from excessive depletion.
For inverter/charger control and basic system monitoring, use the Freedom Basic Remote. For advanced battery monitoring and remote control, Freedom 458 systems can be paired with optional Link instrumentation.
Product Features
MSW AC power inverter with high surge capability
Automatic 3-stage battery charger
Temperature compensation with equalization stage provides optimal charging of deep cycle batteries
Built-in transfer switch automatically transfers between inverter power and incoming AC power
Power sharing prevents source AC input circuit breaker from tripping
Customized settings can be programmed with the Freedom Basic Remote or Link 1000 panels
Includes battery temperature sensor
30 month warranty
Protection Features
Over voltage and under voltage protection
Over-temperature protection
Overload protection
Short circuit protection
Electrical Specifications - Inverter
Output power (continuous): 2000W
Surge power (AC amps): 50A
Output frequency regulation: 60Hz
Inverter voltage regulation: 120V +/-5% true RMS
Output wave form: Modified sine wave
Efficiency (full load): 85%
Peak efficiency: 92%
No load current draw (idle mode): 0.12A
AC output connections: Dual - 20/15 Circuit Breakers
AC input connections: Single
AC transfer switch: 30A
Electrical Specifications - Charger
Charge rate: 100A DC
AC input voltage range: 90 130 VAC
Battery voltage (nominal): 12 VDC
Battery voltage range: 10.0 15.5 VDC
Low battery cut-out: 10.0 VDC
AC input (max. charge mode): 21A AC
Bulk charge voltage: 14.3 VDC***
Float charge voltage: 13.4 VDC***
Equalize charge voltage: 16.3 VDC
Charge control: 3-stage
Battery type settings: Wet / Gel 1 / Gel 2 / AGM
Equalization: Yes
Temperature sensitive charging: Yes
***Default value varies with battery type and temperature
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
1421.44 |
|
|
Dual Power 36/12V Dual Output Battery Charger
Dual Power Series-Intelligent High Frequency Charger
Pro Charging Systems new Dual Power Series of chargers simultaneously charges your main battery independently and the rest of your batteries in series. The result is fast, dependable and efficient charging. The product also leverages powerful exclusive technologies to further enhance the energy management status of fresh and saltwater boats.
PRODUCT FEATURES
Dynamic Intelligent High Frequency Charging
Charges Wet Cell, AGM, Gelled Electrolyte and Lithium Batteries
Charges Main Battery Independently and Additional Batteries in Series
Quickly and Efficiently Charges and Conditions Batteries
Smaller Form Factor and Half the Weight of Transformer Based Chargers
IP67 & IP68 Pending
89% Overall Efficiency
.98 Power Factor
Communicates with Smartphones via Android and iOS Apps
DELTAVIEW LINK
Provides wireless access to remotely monitor charge details of your batteries from your portable device. (Free download from your Apple store or via the link below for Android)
Allows you to modify the charge algorithm
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
887.12 |
|
|
Battery Charger
Attwood's Battery Charger is compact and perfect for your bench, garage or shop use. Overcharge, short circuit and reverse polarity protection provides years of worry free use. Provides 2 and 6 amp charge for 12V batteries. 6 amp charge for 6V batteries. Automatically switches to trickle charge mode after battery is fully charged. Dual rated 12 and 6 volt battery charger can be used for all of your marine, automotive, RV and sports applications.
LED indicator - power on
Ammeter indicates charging current
6 foot power cord length
48 inch battery connector leads
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
40.70 |
|
|
P12 Battery Charger LED Remote
LED Indicators
Charging LED- Quick check for green light confirms charging
Charge Stage- Displays charging stage
Equalize LED- Indicates the charger is currently in equalization mode
Fan Mode- Indicates charger's internal fan mode
Charge Output- Displays the percentage of output current for each battery. Will also indicate maximum output setting when maximum output is adjusted to accommodate for AC source limitations
Alert- Icon LEDs provide warning and alert status for quick diagnostics
Four Control Buttons
Fan- User adjustable settings
Dim/ Alarm- Provides adjustment to brightness of LEDs on display as well as Silence function for alarms
Output- User adjustable charger output when AC source limitations exist that require lowering the AC current draw
Power- Places P12 Battery Charger into standby mode
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
113.29 |
|
|
7608 BatteryLink® Charger (North America) - 12V - 20Amp - 2 Bank
Charge at or away from the Dock
Compact 12V 20A – 2 Bank AC Charger
170A Continuous ACR
Remote Emergency Jump Start
Battery Temperature Compensation
Remote Display Included
IP67 Waterproof
Specifications:
Total Output Current: 20A
Nominal Voltage: 12V DC
Number of Outputs: 1 Negative/2 Positive
Terminal Stud Torque: 60 in-lb (6.78 Nm)
Continuous Rating: 65A
Intermittent Rating: 115A
Universal AC Input Voltage: 90-265V AC
AC Input Frequency: 50/60Hz
Typical Float Voltage: 13.5V DC
Battery Types: AGM/Flooded/TPPL
Cable Size to Meet Ratings: 10 AWG Negative Cable/6 AWG Positive cable
Maximum Battery CCA: 850CCA
Maximum Cable Size: 1/0 AWG (50mm)
Operating Current: 10mA/60mA
Plug Style: North American: NEMA 5-15P
Recommended Battery Bank Sizes: 60Ah Minimum
Terminal Stud Size: 1/4"-20
Warranty: 5 Year
Combine 30 sec: 13.5V
Combine 2 Min: 13.0V
Open 10 sec: 12.35V
Open 30 sec: 12.75V
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
352.07 |
|
|
12V Lithium Ion Battery & Charger
Lightweight and powerful, the V-120L 12 Volt, 9 amp-hour Vexilar Lithium battery has been designed to replace any current Vexilar Flasher/Pack battery and still allow use of the 1 amp, fully-automatic Vexilar battery charger.
Features:
Drop-in replacement for any current Vexilar Flasher/Pack battery
LiFePO4 technology
Delivers twice the number of battery re-charging cycles over sealed lead-acid batteries
Half the weight of the sealed lead-acid battery
|
73.20 |
|
|
Waterproof IP66 DC Battery Charger 10A, 12V Out, 20-80V In, Ruggedized
The BCH10 Step Down series of Battery Chargers supply up to 10 amps of charging current at 12, 24, 36 or 48 volts from any higher voltage between 20 and 80 volts DC in an IP66 rated watertight and EMC shielded enclosure for use in automotive, heavy equipment, marine, industrial, rail or alternative energy environments. The output voltage is configured to allow permanent connection to the battery.
The standard BCH10W model offers a Deutsch connector on a pigtail input/output cable, and the military grade BCH10MW features separate bayonet style MIL connectors for input and output.
The all surface mount high frequency design offers higher reliability, higher efficiency (more than 91%), more power (up to 544 watts at 48 VDC Out) and minimum size.
The BCH10MW is rated for operation from -40 to +55 degrees C and has been tested and confirmed to meet MIL-STD-461F for radiated and conducted emissions. It is designed to meet MIL-STD-810G for shock and vibration.
The unit has reverse input protection, reverse battery connection protection, output over-voltage protection and features spark free connection to the battery. Smart Ideal Diode output circuitry prevents any reverse current flowing from the battery back into the converter.
Features:
Watertight O-ring sealed and EMC gasketed enclosure
‘Output ON’ and “Charging” LED indicators
Up to 80V input
Compact size and easy mounting
Deutsch DT04-4P connector on pigtail or MIL connectors
Heavy duty ruggedization with wide temperature range
Custom output voltages available
Custom connector arrangements
Input and output EMC filters
Two year warranty (parts and labor)
|
470.35 |
|