|
117WR-3 Double Handle Transducer Wrench
Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut.
Wrenches are constructed of 3/16" thick mild steel.
They can easily be bent or modified to accommodate challenging installation locations.
For use with:
B117
B150
B744V
B744VL
B765C
SS555
|
51.05 |
|
|
164WR-3 Double Handle Transducer Wrench
Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut.
Wrenches are constructed of 3/16" thick mild steel.
They can easily be bent or modified to accommodate challenging installation locations.
For use with:
B164
SS164
B175C
SS264
|
63.43 |
|
|
60WR-3 Double Handle Transducer Wrench
Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut.
Wrenches are constructed of 3/16" thick mild steel.
They can easily be bent or modified to accommodate challenging installation locations.
For use with:
B60
SS60
|
51.05 |
|
|
75WR-3 Double Handle Transducer Wrench
Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut.
Wrenches are constructed of 3/16" thick mild steel.
They can easily be bent or modified to accommodate challenging installation locations.
For use with:
B75
SS75
|
51.36 |
|
|
117WR-1 Crows Foot Transducer Wrench
Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut.
Wrenches are constructed of 3/16" thick mild steel.
They can easily be bent or modified to accommodate challenging installation locations.
For use with:
B117
B150
B744V
B744VL
B765C
SS555
|
30.49 |
|
|
75WR-1 Crows Foot Transducer Wrench
Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut.
Wrenches are constructed of 3/16" thick mild steel.
They can easily be bent or modified to accommodate challenging installation locations.
For use with:
B75
SS75
|
31.86 |
|
|
60WR-1 Crows Foot Transducer Wrench
Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut.
Wrenches are constructed of 3/16" thick mild steel.
They can easily be bent or modified to accommodate challenging installation locations.
For use with:
SS60
B60
|
30.49 |
|
|
164WR-1 Crows Foot Transducer Wrench
Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut.
Wrenches are constructed of 3/16" thick mild steel.
They can easily be bent or modified to accommodate challenging installation locations.
For use with:
B164
SS164
B175C
SS164
|
39.70 |
|
|
117WR-4 Transducer Housing Wrench
A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze and stainless steel housings (P617V, B617V, SS617V).
Use wrench 117WR-2 or 117WR-3 for the hull nut.
*Note that this wrench will not fit on the CA500 camera housing.
|
30.49 |
|
|
Single Handle Transducer Nut Wrench for B260, SS260, B265C, B275C
260-WR-2 fits B260, SS260, B265C and B275C.
|
30.49 |
|
|
Airmar R111LH 2kW In-Hull Transducer, CHIRP Low (38-75kHz) & CHIRP High (130-210kHz)
This in-hull transducer uses narrow beams at low/high frequencies to display depth and temperature data to your Garmin Marine Network via your sonar, such as the GSD 26.
Designed to allow both traditional and Spread Spectrum scanning, this 2kW barewire, plastic transducer has a maximum depth of 8,000 ft; an operating frequency of 38 to 75 kHz and 130 to 210 kHz; and a beamwidth of 10x19 degrees. The in-hull mounts on a 0-25° deadrise angle; the pocket mount is installation dependent.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
*In-hull not recommended for cored-hull vessels
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2828.99 |
|
|
Active Imaging HD™ 3-in-1 Transducer
Step up to the ultimate fishfinding clarity with new, high-definition Active Imaging™ HD 3-in-1 sonar. Get the most precise images of fish and structure from Lowrance® CHIRP sonar, high-frequency (up to 1.2MHz) SideScan, and DownScan Imaging™, plus a FishReveal™ DownScan view that makes fish easier to identify below the boat.
Features:
High definition (up to 1.2MHz) SideScan and DownScan Imaging™ deliver the clearest images of fish and structure
Lowrance® CHIRP with superb clarity and target separation
FishReveal™ DownScan view makes fish identification easy
Supports Medium and High CHIRP (83/200kHz) + 455/800kHz and 455/1.2MHz frequencies
Smart transducer design boosts signal clarity
Compatible directly with Lowrance HDS PRO or with an S3100 module with HDS LIVE, HDS Carbon, and Elite FS
|
346.91 |
|
|
A-Series Flat Rocker Circuit Breaker - Double Pole - 10A
Features:
Color actuator indicates "OFF" position
"Trip Free" design cannot be held "ON" during fault current condition
International ON/OFF symbols support vertical or horizontal mounting
Specifications:
Amperage : 10A AC / 10A DC
Actuator Style: Flat Rocker
Poles: 2
Maximum Voltage: 120V AC / 240V AC / 32V DC
Circuit Breaker Type: Magnetic Hydraulic - trip free
Interrupt Capacity: 3000A @ 240V AC / 1500A @ 240V AC[TUV] / 5000A @ 32V DC
Minimum Operating Temperature: -40° C
Maximum Operating Temperature: 85° C
Mounting Screw: #6-32 Stainless Steel
Mounting Screw Torque: 6 in-lb (0.68 Nm)
Screw Terminal Torque: 14 in-lb (1.58 Nm)
Switching Cycles: 10000
Terminal Screw: #10-32 Stainless Steel
Weight: 0.38lb (0.17 kg)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
35.14 |
|
|
A-Series Flat Rocker Circuit Breaker - Double Pole - 15A
Features:
Color actuator indicates "OFF" position
"Trip Free" design cannot be held "ON" during fault current condition
International ON/OFF symbols support vertical or horizontal mounting
Specifications:
Amperage : 15A AC / 15A DC
Actuator Style: Flat Rocker
Poles: 2
Maximum Voltage: 120V AC / 240V AC / 32V DC
Circuit Breaker Type: Magnetic Hydraulic - trip free
Interrupt Capacity: 3000A @ 240V AC / 1500A @ 240V AC[TUV] / 5000A @ 32V DC
Minimum Operating Temperature: -40° C
Maximum Operating Temperature: 85° C
Mounting Screw: #6-32 Stainless Steel
Mounting Screw Torque: 6 in-lb (0.68 Nm)
Screw Terminal Torque: 14 in-lb (1.58 Nm)
Switching Cycles: 10000
Terminal Screw: #10-32 Stainless Steel
Weight: 0.38lb (0.17 kg)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
35.14 |
|
|
A-Series Flat Rocker Circuit Breaker - Double Pole - 16A
Features:
Color actuator indicates "OFF" position
"Trip Free" design cannot be held "ON" during fault current condition
International ON/OFF symbols support vertical or horizontal mounting
Specifications:
Amperage : 16A AC / 16A DC
Actuator Style: Flat Rocker
Poles: 2
Maximum Voltage: 120V AC / 240V AC / 32V DC
Circuit Breaker Type: Magnetic Hydraulic - trip free
Interrupt Capacity: 3000A @ 240V AC / 1500A @ 240V AC[TUV] / 5000A @ 32V DC
Minimum Operating Temperature: -40° C
Maximum Operating Temperature: 85° C
Mounting Screw: #6-32 Stainless Steel
Mounting Screw Torque: 6 in-lb (0.68 Nm)
Screw Terminal Torque: 14 in-lb (1.58 Nm)
Switching Cycles: 10000
Terminal Screw: #10-32 Stainless Steel
Weight: 0.38lb (0.17 kg)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
35.14 |
|