SS571 Stuffing Tube - Stainless Steel  Replacement Stuffing Tube for R99, R109C, R209, R309, R409C, R509C, R609, CM260, CM265C, PM265C, CM111C, CM599C, M180 and M188 and most other Transducer thru-cable applications. Specifications: Hole Inner Diameter (inch/mm): 1"/25mm, Shaft OD 1.68"/43mm Usable Shaft Length: 1.85 in. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Stainless Steel Tube & Rod for Up To 150HP Up To 150HP Outboard Specifications: Cylinder Tube = Stainless Steel Cylinder Tube Dia. = 1.33 Inches Cylinder Rod = Stainless Steel Cylinder Brackets = Stainless Steel Cylinder 1 " Nylok Nuts = Stainless Steel Cylinder End Caps = Cast Aluminum Cylinder Rod Stroke = 7-1/2 Inches Cylinder Type = Un Balanced Cylinder  Cylinder Volume Big Side Vol = 155 ccSmall side Vol = 115 cc Steering Wheel HO/HO = 5.5 and 4.1 Turns Total length Rod Compressed = 15.75 Inches Rod Extended = 23.00 Inches Cylinder Total Weight = 3.15 Pounds (1427 Grams)

SuproFlex Small Stainless Steel End Cap Complete your SuproFlex V11-9960 Rub Rail installation with this stainless steel Type-316 mirror polish finished end cap. Features: Caps Rub Rail at the stern of the boat for a finished look Ensures inserts stay intact Stainless-steel marine-grade Type-316L 5-year limited warranty

Swivel Base Rod Holders RH579XL Half Angle 15° Extra Long Tube Stainless Steel Flush Mount w/ Swivel Base Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.

SS164 Stainless Steel Thru-Hull - 0° Tilted Element - 1KW for CP370 Sounder Step up to a 1 kW—without a fairing! Airmar’s innovative Tilted Element™ technology to a higher power. The 1 kW, flush-mount, tilted element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot accomodate a high-performance fairing. The flush-mounted, stainless steel housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks. The ceramic arrays are tilted inside the housing providing the perfect vertical beam with maximum energy on what is directly below the boat. Features: Depth and fast-response water-temperature sensor 1 kW power for performance to 500 m (1640'), 50 kHz with a wide 22° beam, 200 kHz with a 6° beam Interfaces to any 600 W or 1 kW echosounder Engineered for center-console and trailered boats Low-profile protrusion - less than 6.35 mm (0.25") outside your hull Fixed 0° tilted version for 0° to 7° hull deadrise No affect on boats running performance Stainless steel transducer housing for use on all hull materials Recommended boat size: up to 11 m (35') Exclusive Xducer ID® technology

70 Series Standard Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.  Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a 1/2 in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 0 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in.

70 Series Standard Flush Mount Rod Holder - 15 Degree - Stainless Steel - Cast Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.  Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a 1/2 in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 15 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in.

70 Series Standard Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.  Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a 1/2 in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 30 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in.

80 Series Standard Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.  Features: 316L stainless steel Fits 2-1/2 in. hole diameter Cast models feature a 1/2 in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 0 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-7/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10-1/2 in.

80 Series Standard Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.  Features: 316L stainless steel Fits 2-1/2 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 30 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-7/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10-1/2 in.

Starlink Stainless Steel 1-14 Threaded Adapter Seaview 316L stainless steel Starlink adapter to mount to a 1"-14 threaded post.  Features: 316L stainless steel Starlink adapter to mount to a 1"-14 threaded post The bottom of the adapter has 1”-14 threads with a setscrew to lock it in place The top of the adapter is machined to fit the Starlink antenna post The SV114STLK is 3 5/8” tall

Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - White LED - Stainless Steel Bezel - 12V Attractive, energy efficient lighting for interior and exterior use. Hella Marine round LED courtesy lamps can be installed almost anywhere on board. Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps. Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.  Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment. Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.  Specifications: Lens Material: UV resistant enhanced impact acrylic Rim Material: UV resistant plastic. 316 stainless steel Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 120mm of single core marine cable Operating Voltage: 12V DC or 24V DC Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 50g (including cable)

Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Warm White LED - Stainless Steel Bezel - 12V Attractive, energy efficient lighting for interior and exterior use. Hella Marine round LED courtesy lamps can be installed almost anywhere on board. Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps. Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.  Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment. Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.  Specifications: Lens Material: UV resistant enhanced impact acrylic Rim Material: UV resistant plastic. 316 stainless steel Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 120mm of single core marine cable Operating Voltage: 12V DC or 24V DC Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 50g (including cable)

Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Blue LED - Stainless Steel Bezel - 12V Attractive, energy efficient lighting for interior and exterior use. Hella Marine round LED courtesy lamps can be installed almost anywhere on board. Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps. Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.  Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment. Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.  Specifications: Lens Material: UV resistant enhanced impact acrylic Rim Material: UV resistant plastic. 316 stainless steel Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 120mm of single core marine cable Operating Voltage: 12V DC or 24V DC Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 50g (including cable)

Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Red LED - Stainless Steel Bezel - 12V Attractive, energy efficient lighting for interior and exterior use. Hella Marine round LED courtesy lamps can be installed almost anywhere on board. Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps. Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.  Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment. Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.  Specifications: Lens Material: UV resistant enhanced impact acrylic Rim Material: UV resistant plastic. 316 stainless steel Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 120mm of single core marine cable Operating Voltage: 12V DC or 24V DC Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 50g (including cable)