|
The Snubber - New Line Now At CLR Marine.
The Snubber product line includes a Snubber Twist mooring compensator, Snubber Fender fastener, and Snubber Pull rope for pulling and lifting. The new product line is designed to be innovative and easy to use for all boaters. All Snubber products are made in Finland for domestic and global customers. The Snubber offers a simple, safe, and high-quality customer and user experience.
The Snubber - Product Line
Snubber FENDER - Snubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat.
Snubber TWIST - Snubber TWIST is a patented mooring compensator that absorbs the mooring line’s shocks and reduces the stress on your boat and the dock.
Snubber PULL - Two products with one click. Snubber PULL is a comfortable pulling rope for a rowboat or any small vessel. Securely attach the rope in a few seconds.
Specials Closeouts Remanufactured Rebates
|
|
|
The Snubber
The Snubber product line includes Snubber Twist mooring compensator, Snubber Fender fastener, and Snubber Pull rope for pulling and lifting. The new product line is designed to be innovative and easy-to-use for all boaters. All The Snubber products are made in Finland to domestic and global customers. The Snubber offers a simple, safe, and high-quality customer and user experience.
|
|
|
FINISH THOMPSON DB15V-T-14 PUMP END, PVDF/TEFLON 145TC
|
2957.51 |
|
|
FINISH THOMPSON DB6V-T PUMP END PVDF/TEFLON 56C
|
1085.40 |
|
|
FINISH THOMPSON DB7V-T PUMP END, PVDF/TEFLON 56C
Pulp & Paper
Chemical Processing
Heat Exchanger
Circuit Board Printing
Magnetic Drive Pump, 3/4 HP,
Voltage 208-230/460,
Full Load Amps 2.4-2.3/1.15, 1-1/2 In.
FNPT Inlet, 1-1/2 In.
MNPT Outlet,
Motor Type Induction, Motor Enclosure TEFC,
69 GPM of Water @ 3 Ft. of Head,
69 GPM of Water @ 6 Ft. of Head,
69 GPM of Water @ 9 Ft. of Head,
64 GPM of Water @ 15 Ft. of Head,
58 GPM of Water @ 18 Ft. of Head,
50 GPM of Water @ 24 Ft. of Head,
Length 17-19/64 In.,
Width 7-1/2 In.
|
1107.90 |
|
|
FINISH THOMPSON DB8V-T PUMP END, PVDF/TEFLON 56C
|
1133.10 |
|
|
FINISH THOMPSON DB9V-T PUMP END, PVDF/TEFLON 56C
|
1143.90 |
|
|
March TE-7S-MD 3PH M/T Mica Teflon Imp Weg Motors
|
2352.60 |
|
|
Finish Thompson Sealless Plastic Pumps DB22V-T-FF-3A-35
Suction Port Size2 in
Discharge Port Size2 in
Connection TypesNPT, BSP, Flange, 3×2 Flange, or Union
Maximum Specific Gravityover 1.8
Maximum Working Pressure 90 psi (6.2 bar)
TypeSealless Mag Drive
ConfigurationHorizontal
Construction MaterialsPolypropylene or PVDF
O-Ring MaterialsFKM, EPDM, Simriz®, or Kalrez®
Bushing MaterialsCarbon, PTFE, Ceramic, or SiC
Shaft MaterialsCeramic, Hastelloy® C, or SiC
@3450 RPM@2900 RPM
Flow Range*10 to 221 gpm2.3 to 50.7 m3/h
Maximum Head201 ft41.7 m
Power Range**1.01 to 5.76 hp0.5 to 2.62 kW
|
5756.00 |
|
|
Newbury, Massachusetts, April 15th, 2010: Technology changes rapidly and as a company building WiFi equipment, Island Consulting strives to offer the best. Since the beginning, Island Consulting has continuously made improvements to The Wirie, a long range WiFi solution for boats and RVs. The most recent development in creating a better product involves a high-end marine grade WiFi antenna. To achieve this goal, Island Consulting partnered with the well-known US antenna manufacturer, L-com.
L-com, a leading antenna manufacturer in the wireless connectivity business for over 27 years, agreed to produce a marine grade antenna exclusively for The Wirie. Designed to stringent specifications, the new Wirie antenna is an 8dBi omni-directional high performance marine antenna that features sealed collinear brass elements inside a durable UV-stable white fiberglass radome. The sealed end cap ensures no water entry and drain holes in the base help prevent moisture build-up inside the antenna.
The collaboration between Island Consulting and L-com offers the consumer an economical alternative to other true marine grade WiFi devices currently on the market. “We believe our partnership with L-com has allowed us to turn The Wirie into the most durable and best long range WiFi solution available for boats and RVs”, states Mark Kilty from Island Consulting. According to Karl Blomgren, L-Com's Product Manager, “L-Com is always interested in working with customers, like Island Consulting, to optimize our antennas for their applications to support new product enhancements.” Additional information about The Wirie's new antenna can be viewed at www.thewirie.com/antennadetails.html.
For $250, The Wirie enhances the customers' ability to connect to the internet from the comfort of his/her own boat or RV. The Wirie continues to offer many unique features: flexible stainless steel mounting bracket, easy to install and use software, comprehensive user manual, powerful 1000mW WiFi adapter, IP67 waterproof box, and superior customer support. The Wirie is easy to upgrade as technology continues to advance. In addition to the new antenna, the warranty of The Wirie has been extended to 1 year. The 10-day money back guarantee is still in place.
Through the joint effort between Island Consulting and L-com, The Wirie is a truly marine grade WiFi solution at an affordable price.
For more information, please visit www.thewirie.com.
About The Wirie:
Island Consulting located in Newbury, Massachusetts, USA, manufactures and distributes The Wirie. The Wirie was invented in the Caribbean in April 2009 to provide a cost-effective, user-friendly, long range WiFi solution for boats and RVs. It was quickly expanded to a U.S. operation to allow a larger distribution. Island Consulting is committed to continuous improvements and to making sure every customer is extremely satisfied. Website: www.thewirie.com
About L-com:
Founded in 1982, L-com Global Connectivity is a privately held corporation in Massachusetts, USA, dedicated to the design and production of a wide range of interconnect products for the electronics and data communication industries. L-com places primary product emphasis on copper and fiber cable assemblies, wireless antennas and amplifiers and accessories for modular, coaxial and computer networking applications. In June 2007, L-com acquired HyperLink Technologies of Boca Raton, Florida, USA. Website: www.L-com.com
Contact:
Liesbet Collaert
liesbet@thewirie.com
http://www.thewirie.com
The Wirie can now be found at CLR Marine.
http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION
http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FAntennas
http://www.clrmarine.com/462.html?m4:cat=%2FCOMMUNICATION%2FMobile%20Broadband
http://www.clrmarine.com/m4_view_item.html?m4:item=0Wirie
|
|
|
Mooring Snubber Kit with 3/8" x 20' Dock Line
This flexible snubber stretches to absorb shock and protect boats, cleats, and lines from the strain of wind and water. The resilience of the snubber can be adjusted to conditions by increasing or decreasing the amount of line wrapped around it. Includes snubber and 20 ft. of solid braided multifilament polypropylene dock line.
Specifications:
Thickness (inch): 3/8"
Length (feet): 20'
Color: Blue
|
17.39 |
|
|
FINISH THOMPSON DB10V-T PUMP END, PVDF/TEFLON 56C
Applications
Water and wastewater
Electronics
Pharmaceuticals
Wet scrubber
Pulp and paper
Suction Port Size:
1.5 in
Discharge Port Size:
1.5 in
Connection Types:
NPT, BSP, Flange, or Union
Maximum Specific Gravity:
up to 1.8
Maximum Working Pressure:
80 psi (5.5 bar)
@3450 RPM
@2900 RPM
Flow Range*:
0.5 to 96 gpm
0.114 to 20.7 m3/h
Maximum Head:
51 ft
14.2 m
Power Range**:
0.17 to 0.96 hp
0.15 to 0.70 kW
*See Performance tab for individual impeller diameter capability
**Smallest to largest impeller on 1.0 s.g.
Type:
Sealless Mag Drive
Configuration:
Horizontal
Construction Materials:
Polypropylene or PVDF
O-ring Materials:
FKM, EPDM, Simriz®, or Kalrez®
Bushing Materials:
Carbon, PTFE, Ceramic, or SiC
Shaft Materials:
Ceramic, Hastelloy® C, or SiC
Polypropylene
PVDF
Maximum Temperature:
180º F (82º C)
220º F (104º C)
Kalrez® is a registered trademark of DuPont Performance Elastomers
Simriz® Perfluoroelastomer is a registered trademark of the Simrit® division of Freudenberg-NOK
Hastelloy® C is a registered trademark of Haynes International, Inc.
|
1224.00 |
|
|
FINISH THOMPSON DB11V-T DB11,PVD/TEFLON, 56C
Applications
Chemical processing
Electronics
Pump cleaning solutions
Printed circuit boards
Pulp and paper
Suction Port Size:
2 in
Discharge Port Size:
1.5 in
Connection Types:
NPT, BSP, Flange, or Union
Maximum Specific Gravity:
up to 1.8
Maximum Working Pressure:
90 psi (6.2 bar)
@3450 RPM
@2900 RPM
Flow Range*:
4 to 116 gpm
0.9 to 26.8 m3/h
Maximum Head:
74 ft
23 m
Power Range**:
0.28 to 1.74 hp
0.37 to 1.38 kW
*See Performance tab for individual impeller diameter capability
**Smallest to largest impeller on 1.0 s.g.
Type:
Sealless Mag Drive
Configuration:
Horizontal
Construction Materials:
Polypropylene or PVDF
O-ring Materials:
FKM, EPDM, Simriz®, or Kalrez®
Bushing Materials:
Carbon, PTFE, Ceramic, or SiC
Shaft Materials:
Ceramic, Hastelloy® C, or SiC
Polypropylene
PVDF
Maximum Temperature:
180º F (82º C)
220º F (104º C)
Kalrez® is a registered trademark of DuPont Performance Elastomers
Simriz® Perfluoroelastomer is a registered trademark of the Simrit® division of Freudenberg-NOK
Hastelloy® C is a registered trademark of Haynes International, Inc.
|
2668.58 |
|
|
"Captain Hook" Chain Snubber Small Snubber Hook Only (5/16" T-316 Stainless Steel Stock)
The "Captain Hook" Chain Snubber can be used in a few different ways:
Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck
Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind
Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely
All T-316 stainless. Version with 3-strand nylon line includes professional eye splice.
Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.
|
44.59 |
|
|
"Captain Hook" Chain Snubber Large Snubber Hook Only (1/2" T-316 Stainless Steel Stock)
The "Captain Hook" Chain Snubber can be used in a few different ways:
Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck
Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind
Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely
All T-316 stainless. Version with 3-strand nylon line includes professional eye splice.
Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.
|
71.76 |
|