Round Surface Mount L.E.D. Dome Light w/ On/Off Switch (1356) Chrome Plated Zinc Alloy Clear Translucent Plastic Globe 12 Volt L.E.D.s Draw Less Than 10 Watts Dimmer Capable L.E.D.s Screw Size No. 8 R.H. Depth Overall 1" 3 L.E.D.s 3 watt

Round Surface Mount L.E.D. Dome Light w/ On/Off Switch (1356) White Powder Coat Clear Translucent Plastic Globe 12 Volt L.E.D.s Draw Less Than 10 Watts Dimmer Capable L.E.D.s Screw Size No. 8 R.H. Depth Overall 1" 3 L.E.D.s 3 watt

Locking Collar Pole Light Mounting Base (2 Pin) - Plug-In Type Base 5° Rake Construction Chrome Plated Zinc Alloy Black Plastic Waterproof snap-on cover Pigtail Leads Fits Figs. 1343, 1348, 1400, 1445, 1451, 1455, 1456, 1465 and 1470 Series All-Round Pole Lights

A3 Downlight - Surface/Flush Mount - Stainless Steel This Scandvik A3 Surface Mounted LED Down Light is a single-color light. This A3 Surface Mount Series light features a snap-over bezel in Polished 316 stainless steel and a surface mount collar in a matching color. The A3 mounts securely overhead using two screws. Single-color lights have a two-wire (positive/negative) connection and work with a common switch (on/off).  Features: 316 stainless steel trim 6 x 0.5-watt warm white LED 242 Lumens 2.2 Watt 12 Volt   IP67 Applications: A3s are a good choice for general overhead lighting on smaller boats or as undercabinet lighting for any size vessel Other applications include hard tops, arches, walkway overhangs, shower stalls, or any area that lacks the depth to recess mount a fixture *The "P" within the part number indicates retail packaging

Threaded Collar Pole Light Mounting Base (2 Pin) - Plug-In Type Base 5° Rake Construction Chrome Plated Brass Black Plastic Waterproof snap-on cover Pigtail Leads Fits Figs. 1343, 1348, 1451, 1470, 1622 and 1656 Series All-Round Pole Lights

Perko 1" Thru-Hull Connection f/ use with Hose Chrome Plated Bronze Flange is machined to fit and grooved to retain bedding compound neck is threaded to approximately 3/16 inch from flange. Cast bronze, plain or chromed brass Regular or short length versions Regular Length- Fits maximum hull thickness up to 2 inches Short Length- For thin hull sections up to 5/8 inches maximum Technical Information Regular Length - Chrome Plated Bronze: Hose Size Inches: 1 Mounting Hole Diameter Inches: 1-5/16" Maximum Hull Thickness Inches: 1-3/4" O.D. Flange Inches: 2-1/4" Model Number: 0350006DPC Ship Weight: 4.6/8.4 lbs. Made in the USA

Chrome Plastic LED Dome Light 4" Day/Night - Clear/Red Bulb These vibration resistant LED Day/Night Dome Lights are prewired with on/off/on rocker switch and feature two separate light circuits. One circuit uses a clear bulb and the other circuit uses a red night vision bulb. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and feature an extremely long service life. Features 15 white and 5 red LEDs per light. Constructed of corrosion resistant lightweight plastic with a white or chrome finish. Surface mounts with #8 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bi-Color Bow Light - Chrome Plated Brass Top with Black Plastic Base Features: Chrome Plated Brass Top Black Plastic Base 12V or 24V Bulb Included Certified for Use on Sail or Power Driven Vessels Under 20 Meters (65.6 ft.) in Length (12V or 24V)

Chrome Plated Zinc Alloy Top with Black Plastic Base Gold Plated Contacts Certified For Use on Power Driven Vessels Under 20 Meters (65.6 ft.) in Length

Fixed Mount Combination Masthead / White All-Round Light Fixed Mount Black Polymer and Chrome Plated Zinc Alloy Top Black Polymer Base 3/4" Diameter Anodized Aluminum Tube Bulb: 12V (Included) Pole: 3/4" Dia. Anodized Base Dimensions : 1" x 2-5/8" Screw Size: #8

White Plastic LED Dome Light 4" Day/Night - Clear/Red Bulb These vibration resistant LED Day/Night Dome Lights are prewired with on/off/on rocker switch and feature two separate light circuits. One circuit uses a clear bulb and the other circuit uses a red night vision bulb. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and feature an extremely long service life. Features 15 white and 5 red LEDs per light. Constructed of corrosion resistant lightweight plastic with a white or chrome finish. Surface mounts with #8 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Space Saver Thru-Hull Mount Underwater Light - Chrome Plated Bronze  Features: Chrome Plated Bronze with Mounting Ring 10' of 18/2 Electrical Cable Safety Seal Design Prevents Water Intrusion in the Event of Glass Breakage Terminal for Bonding Wire Specifications: 12V 35W  2.9 AMP Bulb: 30° Beam 1300 Lumens Lab Rated Bulb Life: 3500 Hours Length Overall: 5-1/4" Flange Diameter: 2-7/8" Mounting Hole Diameter: 1-3/4"

Pilot House Control Searchlight Chrome plated Corrosion resistant, splash proof construction Tin plated electrical contacts and wiring Lever action, pilot house control 380 degree horizontal movement, 70 degree vertical movement Lever handle controls both horizontal and vertical movement Set for continuous back and forth sweep or adjust position with manual toggle controls For ceiling thickness of up to 5" For 12, 24 or 32 Volts

Surface Mount & Latch - Black Body, Chrome Handle, Offset Cam Bar, 3/4" - 2-3/8" Features: Polymer body T Handle Stainless Steel Stem Lock with 2 keys Offset cam bar Easily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick The T - Handle drops down flush in either the open or closed (180x Rotation) position. (except with the offset cam bar positioned upward) The rubber seal & boot under the T - Handle seals the lock cylinder preventing water intrusion Specs: Face Plate Diameter: 3" Body Color: Black Handle Color: Chrome Adjustment Cam Bar Inches: 3/4 - 2-3/8"

Stainless Steel LED Dome Light - 4" Lens  LED Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with integral on/off toggle switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 18 white LEDs per light. Surface mounts with three RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.