|
AMT Pump 2P7XZR Hatz Diesel Fire Pump
2" Engine Driven Portable High Pressure pump is cast aluminum construction with cast iron volute and male NPT ports. Pump applications include fire protection and irrigation. These pumps are available with a wide choice of standard and heavy duty gasoline or diesel fueled engines. These pumps feature high efficiency closed cast aluminum impeller. All models come equipped with EPDM/EPR elastomers and seals. Most models include a heavy duty steel roll frame.
Features
Removable/Replaceable Cast Iron Suction & Discharge Flanges
Discharge Port Rotates in 90 Increments
One Tool Serviceability, Tool Included with Engine Driven Models (Not with Kits)
Includes Strainer and Rubber Foot Mounting
Maximum Temperature 180 F
Specifications
Type: High Pressure Pumps
Series: 2" Engine Driven Portable High Pressure Pumps
Driver: Hatz Diesel 1B30
Seal Type & Elastomer/Faces: EPDM/EPR/CAR/CER
Tank Size (Gal/Ltr): 1.32 / 5.0
Run Time (Hr.): 2.7
Mounting: Roll Cage
HP: 5 HP
SUCTION: 2" NPT
DISCHARGE: 2" NPT
L 31" X W 22.5" X H 23.6"
Warranty: 1 Year
Product images are a representation only
|
6150.23 |
|
|
AMT Pump MSV3-5-1P Multistage Mtr/Pmp 1Hp 115v
Multi-Stage Booster Pump – MSV3-5-1P, 5-Stage, 115-208-230 Volts
NEMA 56C, Dual Cycle 50 and 60 Hz, 1.0 HP, single phase, Totally Enclosed, Fan Cooled motor
Recommended to operate at or below the Best Efficient Point which is at 16 GPM and a Max Total Head of 105 feet
Cast Iron base and adapter
1 inch NPT cast iron flanges
304 series stainless steel components with Teflon wear rings
EPDM-Tungsten Carbide Seal that is easy to remove and replace
The AMT MSV3-5-1P is a non-self-priming/gravity feed, industrial pump with high pressure and low output. This unit is more commonly referred to as a jockey pump and is often installed for water transfer uses where no suction lift is required such as boiler feed, condensate return, high pressure washdown, irrigation, booster service, and fire protection/sprinkler systems. These pumps have NOT been investigated for use in drinking water systems.
|
1465.20 |
|
|
AMT Pump 5760-95 1Hp 2"Npt 115V CI-SS
Submersible Shredder Sewage Pump 5760-95, 130 GPM, 1.0 HP, Carbide Tipped
Cast Iron construction with stainless steel motor housing
1.0 HP, 14 Amps, 115 volts, continuous duty, single phase electric motor
Can handle solids up to 1 inch
Triplex seal system
2 inch output port with a discharge rate of 7800 gallons per hour
The AMT by Gorman-Rupp 5760-95 is an industrial grade shredder sewage pump that is designed to handle sludge and dirty water applications. Features an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging when pumping sludge type waste. Liquid content still must be above 85% to keep from damaging the pump and possibly void the warranty.
|
1244.98 |
|
|
Amt 5351-95, Cast Iron Coolant Pump 230/460volt
INTERCHANGEABLE IMMERSION & SUCTION COOLANT OIL PUMPS
1/4 HP Totally Enclosed Motor (TEFC)
Three Phase Motor
230/460 volts 0.8/0.4 amps
Stainless Steel or Composite Semi-open Impeller Options
Immersion and Suction Types
Cast Iron Construction
Handles Viscosity up to 500 SSU
Standard Replacement for Machine Tool Industry
Delivers up to 56 GPM and 26 PSI
3/4" FNPTOutlet
AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants.
AMT Interchangeable Coolant/Oil pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.
|
507.94 |
|
|
AMT 5391-95, Immersion Coolant Oil Pump 23gpm 230/460volt
INTERCHANGEABLE IMMERSION & SUCTION COOLANT/OIL PUMPS
Cast Iron Construction
1/4 HP 230/460V 3 Phase Immersion Type
Shaft Seal Material: Sealless Design
Speed (RPM): 3450
Type: IMM
Voltage: 230/460
Fluid Port: 0.5"
HP:1/4
Impeller Material: Stainless Steel
GPM: 23
Replacement for Standard Machine Tool Industry Pumps
Fuji: VKP-063A
Old Fuji: VKN-061A
Mitsubishi: NQ100J
Toshiba: OPF-100M
Hitachi: CPD-100M
Yasukawa: VFPC-100
Graymills: IMV-25
AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants.
AMT Interchangeable Coolant/Oil pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.
|
487.69 |
|
|
AMT 5390-95, Immersion Coolant Oil Pump 23gpm 115volt
INTERCHANGEABLE IMMERSION & SUCTION COOLANT OIL PUMPS
1/4 HP Totally Enclosed Motors (TEFC)
115/230 volts, 3.0/1.5amps
Single or Three Phase Motors
Stainless Steel or Composite Semi-open Impeller Options
Immersion and Suction Types
Cast Iron Construction
Handles Viscosity up to 500 SSU
Standard Replacement for Machine Tool Industry
1/2 inch FNPT Ports
Delivers up to 23 GPM and 26 PSI
Replacement For The Following Standard Machine Tool Industry Pumps
Fuji: VKP-063A
Old Fuji: VKN-061A
Mitsubishi: NQ100J
Toshiba: OPF-100M
Hitachi: CPD-100M
Yasukawa: VFPC-100
Graymills: IMV-25
Gusher: VBV-14
AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants.
|
502.04 |
|
|
AMT 5381-95, Immersion Coolant Pump Cast Iron 10gpm
INTERCHANGEABLE IMMERSION & SUCTION COOLANT/OIL PUMPS
1/8 HP Totally Enclosed Motor (TEFC)
Three Phase Motor
230/460 volts, 0.3/0.19 amps
Stainless Steel or Composite Semi-open Impeller Options
Immersion and Suction Types
Cast Iron Construction
Handles Viscosity up to 500 SSU
Standard Replacement for Machine Tool Industry
Delivers up to 10 GPM
3/8 inch outlet diameter
Able to pump liquid down to 2 inches
Replacement for to following Standard Machine Tool Industry Pumps
Fuji: VKP-053A
Old Fuji: VKN-051A
Mitsubishi: NQ-60J
Toshiba: OPF-60M
Hitachi: CPD-060M
Yasukawa: VFPC-061DIF
Graymills: IMV-08
Gusher: VBV-18
|
250.97 |
|
|
AMT Pump 2105-016-01 Bronze Casing Am 3890-K7
|
411.06 |
|
|
AMT Pump 4822-95 Rotary Hand Pump
AMT Rotary Drum Pump
1" Suction & 3/4" Discharge
Buna-N Shaft Seal
Includes: Bung Adapter & Suction Tube Included
Material: Cast Iron
|
133.38 |
|
|
AMT Pump 4896-010-98 Impeller XSS 3/4Hp 3Ph
AMT Pump Repair Part, IMPELLER XSS 3/4HP 3PH SUBGRP/ KIT
|
165.75 |
|
|
AMT Pump 4861-97 Brz Centrifugal Pump 12V
1/8 HP, Totally Enclosed, Not Ventilated, 12 volt DC electric motor
Salt water resistant Naval Bronze construction
Semi-open, self-cleaning impeller that can handle solids to 3/16 inch diameter
Buna-N mechanical seal and O-ring
The AMT 4861-97 is a lightweight 12 volt pump that is designed for use in live tanks, chemical transfer, salt water and general dewatering applications.
Features durable bronze construction with 3/4 inch NPT input and output ports.
Pump is NOT self-priming and requires flooded suction.
|
363.29 |
|
|
AMT Pump 282L-95 3Ph 2Hp Open Drip-Proof 56J 230/460
AMT Pump 282L-95, 1-1/2" Cast Iron Self-Priming Centrifugal Pump
Self-Priming Centrifugal Electric Driven Pump
HP: 2HP
Motor Frame Size: 56J
Voltage: 230/460V
Phase: 3
Shaft Seal Material: Buna-N / Stainless Steel
|
826.20 |
|
|
AMT Pump 5411-95 Coolant Pump Cast Iron Imm
Cast Iron Immersion Type Coolant Pump
Oil Coolant Pumps
Fluid Port: 1
HP: 1
Impeller Material: Stainless Steel
Phase: 3
1" Cast Iron 1 HP 230/460V 3 Phase Immersion Type
Shaft Seal Material: Sealless Design
Speed (RPM): 3450
Type: IMM
Voltage: 230/460
|
933.12 |
|
|
AMT Pump 3152-95 Centrifugal Pump Cast Iron
Heavy Duty Straight Centrifugal Pump
HP: 5
Voltage: 230/460
Phase: 3
Type: Totally Enclosed, Fan Cooled
Motor Frame Size: 184JM
Shaft Seal Material: Buna-N / Stainless Steel
AMT Crossover Model for Flint & Walling C55A503T
|
1437.76 |
|
|
AMT Pump 4821-95 Rotary Hand Pump Cast Iron
Heavy-duty Cast Iron body with Buna-N seal
5 GPM @70 RPM (11 oz./stroke)
Carbon vanes
0.75" suction x 1" discharge ports
0.75-Inch NPT steel discharge spout assembly (included)
1-Inch NPT x 40-Inch steel suction tube assembly (included)
2-Inch Cast Iron Bung adapter
Maximum Temperature 160F
Self-Priming
Capable of handling compatible fluids with a maximum of 5,000 SSU viscosity at a minimum of 70 degrees F liquid temperature (roughly equivalent to SAE 40 motor oil)
Liquids must be free of debris and solids for proper operation
|
83.37 |
|