|
AL7301CR
Fits 1.050" Pipe
The AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.
|
103.85 |
|
|
AL7302CR
Fits 1.315" Pipe
The AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.
|
103.85 |
|
|
AL7303CR
Fits 1.660" Pipe
The AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.
|
103.85 |
|
|
AL7304CR
Fits 1.900" Pipe
The AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.
|
103.85 |
|
|
AL7211CR
The AL7211CR (1-3/8"ID) is the perfect holder for boats in the 16 to 31 ft range. Its economical price and small footprint (3"x 5") make it our most popular center rigger holder. The receiving tube of this marine grade anodized holder is set at a 45 degree angle. This is the perfect angle for boats where the mounting position is low and the cockpit is not extremely deep (e.g. mounting on T-Tops, Hard Tops, or Fly-Bridges). Compatible poles are 12 or 14ft in length and come standard in bright silver anodized finish with a Black Spike.
Recomended poles for AL7211CR
AO8712CR - 12 ft Center Rigger (Mk II)
AO8714CR - 14 ft Center Rigger (Mk II)
MX8712CR - 12 ft MX Step- Tube Style
|
108.00 |
|
|
Center Rigger Clamp-On System
For multiple lines in the water.
Features:
Clamp-on center rigger holder 1-1/8" OD base
Tigress Track® telescoping center rigger
Center rigger kit
Holder sized to fit 1-5/16" schedule pipe
Specifications:
Mount: 1-1/8" clamp-on
Clamp Size: 1-5/16"
Outrigger: 8" Silver XD
Rigging Kit: Center
|
305.83 |
|
|
Center Rigger Clamp-On System
For multiple lines in the water.
Features:
Clamp-on center rigger holder 1-1/8" OD base
Tigress Track® telescoping center rigger
Center rigger kit
Holder sized to fit 1-5/16" schedule pipe
Specifications:
Mount: 1-1/8" clamp-on
Clamp Size: 1-5/16"
Outrigger: 8" Black XD
Rigging Kit: Center
|
305.83 |
|
|
Center Rigger Holder - 1-5/16" IPS Pipe - 1-1/8" Holder
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. Fits 1" Pipe Size.
|
88.03 |
|
|
Clamp-On Accessory
Fits: 1.315" Pipe
Mounts: Horizontal
Finish: Silver
Heavy duty Clamp-On brackets come ready to mount fixed antennas. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.
|
74.58 |
|
|
Clamp-On Accessory
Fits: 1.050" Pipe
Mounts: Horizontal/Vertical
Finish: Silver
Heavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.
Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit.
|
84.61 |
|
|
Clamp-On Accessory
Fits: 1.050" Pipe
Mounts: Horizontal
Finish: Silver
Heavy duty Clamp-On brackets come ready to mount fixed antennas. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.
|
74.58 |
|
|
Clamp-On Accessory
Fits: 1.050" Pipe
Mounts: Horizontal/Vertical
Finish: Silver
Heavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.
Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit.
|
84.61 |
|
|
Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 2.375" O.D.
Pipe
Color:Black
Pipe Size:#5
Fits:2.375" O.D. Pipe
Mount:Vertical
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.
These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|
|
Clamp-On Rod Holder - White Aluminum - Vertical Mount - Fits 2.375" O.D.
Pipe
Color:White
Pipe Size:#5
Fits:2.375" O.D. Pipe
Mount:Vertical
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.
These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|
|
Aluminum Clamp-on Rod Holders
Model: RA5005SL
Color: Silver
Fits: 2.375" O.D. Pipe
Mount: Vertial
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
148.08 |
|