Jabsco Flexible Impeller Utility Pump W/Tefc Motor   FEATURES Pump Body: Bronze Port Size: 1" NPT, Internal Flow: 23 GPM at 10 feet of head. Pressure: Up to 26 PSI Impeller: Nitrile Shaft Seal: Lip Type Shaft: 316 Stainless Steel Impeller Sleeve over Steel Motor Shaft Motor: 3/4 HP, Capacitor Type, Open Drip Proof or Totally Enclosed Fan Cooled, Overload Protector, 1725 RPM, 60 Hz, Single Phase, 115/230 Vac, with 8 foot cord and plug wired for 115 Vac operation.     APPLICATIONS / CHARACTERISTICS MARINE: Bait Tank Circulation; Washdown, Utility Dockside Pump.     INDUSTRIAL: Industrial Filling Systems; Utility Shop Pump; Transfer Gum Arabic, Transfer Distilled Water; Recharge Water Softeners; Ice Water Recirculation; Hydro-static Pressure Testing; Sump Pumping.   FOOD, BEVERAGE & DAIRY: Circulate Cooling Water; Defrost Refrigeration Coils; Fill Drums; Wash Down Equipment and Floors; Utility Pump.   HOME: Fill and Empty Tubs, Pools; Empty Basements and Cesspools; Water Systems; Water Lawns and   Gardens; Remove Water from Low Areas; Recharge Water Softeners.   PLUMBING: Empty Clogged Drains; Empty Sumps, Sinks and Tubs; Pump Out Water Closets.   FARM: Fill Tractor Tires, Water Tanks; Pump out Silo Pits (liquid manure); Flush and Clean Animal Pens.   CONTRACTORS: Remove Water from Excavations; Supply Water to Mortar Boxes; Cement Mixing; Washdown Equipment.   Jabsco Flexible Impeller Utility Pump 115V TEFC Motor 23GPM Nitrile Impeller

Jabsco Flexible Impeller Pedestal Pump   FEATURES Pump Body: Brass, High Profile Verson Port Size: 3/8" BSP or 3/8" NPT Flow: Nominal 10 Litres/min (2.2 gallons/min) at 1500rpm Impeller: Neoprene Shaft Seal: Carbon/Ceramic Mechanical Shaft: Stainless Steel 12mm     APPLICATIONS / CHARACTERISTICS Marine: Engine Cooling, Bilge Pumping, Water Circulation.   Industrial: Circulating and Transferring, Velocity Mixing.   Farming: Pumping Water for Stock, Liquid Ballast Transfer.   Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. Self-priming from dry up to 1.5m (4.9ft).     Jabsco Flexible Impeller Pedestal Pump 3/8" NPT High Profile  

Jabsco Pump Ped Full Cam Neo   FEATURES Pump Body: Bronze pedestal Port Size: 1" NPT Flow: Available with full cam or 2/3 cam for reduced flow. Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: 316 Stainless Steel     APPLICATIONS / CHARACTERISTICS Marine Engine Cooling     Jabsco Flexible Impeller Pedestal Pump 1"NPT Full Cam Neoprene Impeller

Jabsco 18610 Series Flexible Impeller Utility Pump FEATURES Pump Body: Bronze Port Size: 1/2" NPT Female. Includes Two 3/4" Male Garden Hose Adapters. Flow: 6.0 GPM at 10 feet of head Pressure: to 17.3 PSI Impeller: Neoprene, Nitrile or Viton Shaft Seal: Lip Type Shaft: Stainless Steel Motor: 1/6hp - 115 Vac, 60 Hz. ODP Motor 1/4hp - 115 Vac, 60 Hz. TENV Motor Thermal Overload Protector Stainless Steel Shaft 8' Cord with 3 Prong Grounded Plug     APPLICATIONS / CHARACTERISTICS INDUSTRIAL: Circulating and transferring, velocitymixing, pumping machine tool coolants, return spill, sump drainage, pharmaceuticals, soap, liquors, ink, dyes, alcohol, glycerine, brine and pumping water for cooling heliarc welding equipment     FARMING: Pumping water for stock, pumping water from shallow wells and cisterns   MARINE: Washdowns, utility dock side pump   PLUMBING & HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, water heaters and water closets, drains and sinks, draining fishponds and small pools   PUBLIC UTILITIES AND MUNICIPALITIES: Dewatering and draining meter boxes and excavations, dust control and sampling     Jabsco Flexible Impeller Utility Pump 115V ODP Motor 6GPM Neoprene Impeller  

Jabsco 115V Transfer Pump   FEATURES Pump Body: Bronze Port Size: 1/2" NPT Internal and 1" Hose Barb External. Adaptor for 3/4" Garden Hose. Flow: Up to 5.8 GPM Pressure: Up to 17.3 PSI Impeller: Neoprene, Nitrile or Viton Shaft Seal: Lip Type Motor: 1/6hp - 115 Vac, 60 Hz. ODP Motor 1/4hp - 115 Vac, 60 Hz. TENV Motor 1725 RPM, Thermal Overload Protection, Stainless Steel Shaft, 8 foot Cord wilh 3 Prong Grounded Plug.     APPLICATIONS / CHARACTERISTICS INDUSTRIAL: Circulating and transferring, velocity-mixing, pumping machine tool coolants, return spill, sump drainage, pharmaceuticals, soap, liquors, ink, dyes, alcohol, glycerine, brine and pumping water for cooling heliarc welding equipment.     FARMING: Pumping water for stock, pumping water from shallow wells and cisterns.   MARINE: Washdowns, utility dock side pump.   PLUMBING & HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, water heaters and water closets, drains and sinks, draining fishponds and small pools.   PUBLIC UTILITIES AND MUNICIPALITIES: Dewatering and draining meter boxes and excavations, dust control and sampling.       Jabsco Bronze Utility Transfer Pump 1/4HP 115V TENV Nitrile Impeller  

Jabsco 1673-1003 Pump 1/2" Ped Mt FEATURES Pump Body: Bronze Port Size: 1/2" NPT Impeller: Nitrile Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.) Impeller: Neoprene or Nitrile (Oil Resistant) Shaft Seal: Lip Seal or Mechanical seal, Buna N Shaft: Stainless Steel Bearings: Sealed Ball Bearings    APPLICATIONS  This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.   MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.   INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,   Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.   FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.   PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools   Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Lip Seal Nitrile Impeller  

Jabsco Flexible Impeller Pedestal Pump Ped Mt Neo Imp 3/8 FEATURES Pump Body: Bronze Port Size: 3/8" NPT Internal Flow: 7.5 GPM Impeller: Viton, Neoprene or Nitrile Shaft Seal: Nitrile or Viton Lip Type Shaft: 316 Stainless Steel     APPLICATIONS / CHARACTERISTICS Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. MARINE: Engine Cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump. INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc      Jabsco Flexible Impeller Pedestal Pump 3/8"NPT Neoprene Impeller

Jabsco Flexible Impeller Pedestal Pump Ped Mt Neo Imp 1 1/4" FEATURES Pump Body: Bronze pedestal Port Size: 1-1/4" (32mm) NPT Internal Horizontal ports on 6400-Series Vertical ports on 7420-Series Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: 316 Stainless Steel Standard shafts extend 2 5/16" from pump Short shafts extend 1 5/16" from pump for use on Caterpillar Engines Bearings: Pre-lubricated Double Row Ball     APPLICATIONS / CHARACTERISTICS MARINE: Pumping bilges, Washdown, Engine Cooling.     INDUSTRIAL: Circulating and Transferring liquids; Velocity-mixing; Transferring soap, liquors, pastes, glues, glycerine, lotions and brine.   FARM: Pumping water for stock and poultry houses and Booster Pumping.   PLUMBING & HOME: Pumping out flooded basements, cesspools, sumps and many other uses.    Jabsco Flexible Impeller Pedestal Pump 1 1/4"NPT Full Cam Neoprene Impeller

Jabsco 9190-1001 Pump Head for 18610-0001

Oberdorfer 405M-04 Pump Peo G/P Sewage   FEATURES Pump Body: Bronze Ports: 1" NPT and 1 1/2" Hose Flow: 24 GPM at 20 feet of head Impeller: Neoprene Standard, Buna Optional Shaft Seal: Mechanical Shaft: Stainless Steel Motor / Drive: Close coupled Rubber Impeller Pumps are mounted directly onto the motor without the use of a shaft coupling. This pump is designed to be coupled to a Nema C 56C faced motor. It uses an aluminum adapter plate to accommodate the pump. The gas engine mount has its own adapter. We can supply additional motors and assemble for you.     APPLICATIONS / CHARACTERISTICS RUBBER IMPELLER PUMP BRONZE CLOSE COUPLED Close coupled Rubber Impeller Pumps are made of high quality bronze for maximum corrosion resistance. The rubber impeller is mounted on a separate stainless steel shaft which is counterbored on the outer end in order to slide over the carbon steel motor shaft. Ball or sleeve bearings in the motor or engine support the shaft. Model 405M has a mechanical seal. Impellers are made of Neoprene rubber, Buna N impellers are available on request. Suction lifts of 15 ft. are possible when pump is fully primed. Portable. Compact. Easy Impeller Replacement. Vacuum Switch Shut-off Optional.   Oberdorfer Flexible Impeller Utility Pump Head Only, 1"NPT Ports, Neoprene Impeller  

Oberdorfer 405M-04-M26 Pump 3/4Hp 1725Rpm 115/230 NSN: 1304038-18-5   FEATURES Pump Body: Bronze Ports: 1" NPT and 1 1/2" Hose Flow: 24 GPM at 20 feet of head Impeller: Neoprene Standard, Buna Optional Shaft Seal: Mechanical Shaft: Stainless Steel Motor / Drive: Close coupled Rubber Impeller Pumps are mounted directly onto the motor without the use of a shaft coupling. This pump is designed to be coupled to a Nema C 56C faced motor. It uses an aluminum adapter plate to accommodate the pump. The gas engine mount has its own adapter. We can supply additional motors and assemble for you.     APPLICATIONS / CHARACTERISTICS RUBBER IMPELLER PUMP BRONZE CLOSE COUPLED Close coupled Rubber Impeller Pumps are made of high quality bronze for maximum corrosion resistance. The rubber impeller is mounted on a separate stainless steel shaft which is counterbored on the outer end in order to slide over the carbon steel motor shaft. Ball or sleeve bearings in the motor or engine support the shaft. Model 405M has a mechanical seal. Impellers are made of Neoprene rubber, Buna N impellers are available on request. Suction lifts of 15 ft. are possible when pump is fully primed. Portable. Compact. Easy Impeller Replacement. Vacuum Switch Shut-off Optional.   Oberdorfer Flexible Impeller Utility Pump, 1"NPT Ports, Neoprene Impeller, 3/4HP 115/230V ODP Motor  

Jabsco Pump 5320-0011 which replaces Westerbeke 11830 This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and has vertically oriented ports 5.8 gpm (22 lpm) at 10 ft. (3m) total head at 1750 rpm Self-priming to 10 ft. (3m) vertical lift   Fitting: 3/8 in. NTP Size: 5 15/16 long x 3 1/2 wide x 3 5/18 in. high Weight: 1 1/2 lbs. (0.7 kg) Pump with neoprene impeller, full cam, and lip seal Replaces Westerbeke 11830   FEATURES Pump Body: Bronze pedestal Port Size: 3/8" NPT vertical Flow: 7.3 GPM at 10 feet of head, 2100 RPM Pressure: Max 17.3 PSI at 40 feet of head, 2100 RPM Impeller: Neoprene Shaft Seal: Lip Type Shaft: Steel   MARINE Pumping bilges, washdowns. Circulating water in bait tanks. Utility dockside pump. Circulating engine raw water.   INDUSTRIAL Circulating and transferring liquids. Velocity-mixing. Pumping coolants on machine tools. Returning spilled liquids to process. Pumping waste water to sewer. Cellar, yards and sump drainage. Chemical manufacturers and pharmaceutical houses- to pump soap, liquors, ink, dyes, medicines, alcohol, various acids, tanning liquors, glycerine, lotions, brine, etc.

Jabsco Flexible Impeller Pedestal Pump 1 1/4" Vert Neo Imp Pump Body: Bronze pedestal Port Size: 1-1/4" (32mm) NPT Internal Horizontal ports on 6400-Series Vertical ports on 7420-Series Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: 316 Stainless Steel Standard shafts extend 2 5/16" from pump Short shafts extend 1 5/16" from pump for use on Caterpillar Engines Bearings: Pre-lubricated Double Row Ball MARINE: Pumping bilges, Washdown, Engine Cooling.    INDUSTRIAL: Circulating and Transferring liquids; Velocity-mixing; Transferring soap, liquors, pastes, glues, glycerine, lotions and brine.   FARM: Pumping water for stock and poultry houses and Booster Pumping.   PLUMBING & HOME: Pumping out flooded basements, cesspools, sumps and many other uses.   Jabsco Flexible Impeller Pedestal Pump 1 1/4"NPT Short Shaft For Caterpillar Engine Cooling

Jabsco 11860-0006 Pump 24V Elect Clutch   FEATURES Pump Body: Bronze Port Size: 11860-Series, 1" NPT Internal 11870-Series, 1-1/4" NPT Internal Electric: 12V, 24V or 32V Pulley: Single B groove or Double A groove Impeller: Nitrile Shaft Seal: Mechanical Carbon-Ceramic, Face Type Shaft: Stainless Steel Bearings: Shielded Ball Bearings   APPLICATIONS / CHARACTERISTICS This electrically activated clutch pump offers all the benefits of flexible impeller pumps with a substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation.   MARINE: Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock-side pump.     INDUSTRIAL: Circulating and transferring, Velocitymixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,   Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning Liquors, Glycerine, Brine, etc.   FARMING: Pumping water stock, Pumping water from shallow wells and cisterns.   PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.   PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for draining meter boxes, manholes, excavations; For pollution control and watering for dust control.     Jabsco- Electric Clutch Pump 24V, 1" NPT Ports, 2 Groove "A" Belt Pulley  

Jabsco Pump 12V 1B Clutch   FEATURES Pump Body: Bronze Port Size: 11860-Series, 1" NPT Internal 11870-Series, 1-1/4" NPT Internal Electric: 12V, 24V or 32V Pulley: Single B groove or Double A groove Impeller: Nitrile Shaft Seal: Mechanical Carbon-Ceramic, Face Type Shaft: Stainless Steel Bearings: Shielded Ball Bearings     APPLICATIONS / CHARACTERISTICS This electrically activated clutch pump offers all the benefits of flexible impeller pumps with a substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation.   MARINE: Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock-side pump.     INDUSTRIAL: Circulating and transferring, Velocitymixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,   Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning Liquors, Glycerine, Brine, etc.   FARMING: Pumping water stock, Pumping water from shallow wells and cisterns.   PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.   PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for draining meter boxes, manholes, excavations; For pollution control and watering for dust control.     Jabsco- Electric Clutch Pump 12V, 1" NPT Ports, 1 Groove "B" Belt Pulley