|
MA4505 5 Channel Marine Amplifier
Weather-resistant & high-performance marine amplifier
The weather-resistant & high-performance JBL Marine amplifiers deliver impressive power from a compact chassis designed to withstand outdoor environments. Available with 4-channel and 5-channel outputs. JBL Marine amplifiers incorporate our latest amplifier topology that includes selectable all-, high-, or low-pass crossovers with variable electronic frequency adjustment for precision system tuning. Engineered for harsh marine conditions, with power and performance to meet the needs of any outdoor audio system, JBL Marine amplifiers are the perfect match for all of your JBL marine products.
Features:
1 amplifier
Stainless steel mounting hardware
Rubber inserts
4 High-level input adapters
3 spare fuses
2 2-color brand stickers
Quick start guide
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
445.14 |
|
|
NXL-X1200.5D 5-Channel Marine Amplifier - 2800W
The DS18 NXL Series was developed for people who want a very small audio footprint that is capable of putting out lots of power and sound in a small and waterproof package.
The NXL Series of amps are one of our most efficient lines with great power output all while withstanding the elements.
Being a full-range amplifier, they can be integrated with and run on subwoofers, mid-ranges, and tweeters. The high pass and low pass filters will help you tune your speaker choice accurately so you can obtain crystal clarity from low volume levels all the way to the maximum for the ultimate audio experience.
All NXL Series amplifiers have stable and reliable 4-layer PCB layouts, an IP67 waterproof rating for power sports an ultra-compact size for easy installation, and audio precision quality control verification.
The NXL Marine Amplifier series is exactly what the outdoors lover will need for their boat or vehicle audio to brave the trails, enjoy the lake, or any situation that needs a strong versatile waterproof amplifier.
Features:
Multiple channel input selector - 2 or 4 channel
IPX6 Waterproof for Powersports applications
Ultra-compact size for easy installation
Audio precision quality control verification
Technical Specifications:
Number of Channels - 5
Frequency Response - 10Hz - 200KHz
2 Ohm RMS Power (14.4V) Per Channel - 4 x 200W
4 Ohm RMS Power (14.4V) Per Channel - 4 x 150W
4 Ohm RMS Power Bridge (14.4V) Channel - 2 x 400W
Signal-to-Noise Ratio - >85dB
Product Dimensions: (L x W x H) - 12.67" x 4.4" x 1.77" (322mm x 112mm x 45mm)
*Sold as an Individual
|
719.94 |
|
|
NXL-X600.4D 4-Channel Marine Amplifier - 1600W
The DS18 NXL Series was developed for people who want a very small audio footprint that is capable of putting out lots of power and sound in a small and waterproof package.
The NXL Series of amps are one of our most efficient lines with great power output all while withstanding the elements.
Being a full-range amplifier, they can be integrated with and run on subwoofers, mid-ranges, and tweeters. The high pass and low pass filters will help you tune your speaker choice accurately so you can obtain crystal clarity from low volume levels all the way to the maximum for the ultimate audio experience.
All NXL Series amplifiers have stable and reliable 4-layer PCB layouts, an IP67 waterproof rating for power sports an ultra-compact size for easy installation, and audio precision quality control verification.
The NXL Marine Amplifier series is exactly what the outdoors lover will need for their boat or vehicle audio to brave the trails, enjoy the lake, or any situation that needs a strong versatile waterproof amplifier.
Features:
Multiple channel input selector - 2 or 4 channel
IPX6 Waterproof for Powersports applications
Ultra-compact size for easy installation
Audio precision quality control verification
Technical Specifications:
Number of Channels - 4
Frequency Response - 10Hz - 20KHz
2 Ohm RMS Power (14.4V) Per Channel - 4 x 200W
4 Ohm RMS Power (14.4V) Per Channel - 4 x 150W
4 Ohm RMS Power Bridge (14.4V) Channel - 2 x 400W
Signal-to-Noise Ratio - >85dB
Product Dimensions: (L x W x H) - 9.92" x 4.4" x 1.77" (252mm x 112mm x 45mm)
*Sold as an Individual
|
599.94 |
|
|
NXL-X1000.1D 1-Channel Marine Amplifier - 2000W
The DS18 NXL Series was developed for people who want a very small audio footprint that is capable of putting out lots of power and sound in a small and waterproof package.
The NXL Series of amps are one of our most efficient lines with great power output all while withstanding the elements.
Being a full-range amplifier, they can be integrated with and run on subwoofers, mid-ranges, and tweeters. The high pass and low pass filters will help you tune your speaker choice accurately so you can obtain crystal clarity from low volume levels all the way to the maximum for the ultimate audio experience.
All NXL Series amplifiers have stable and reliable 4-layer PCB layouts, an IP67 waterproof rating for power sports an ultra-compact size for easy installation, and audio precision quality control verification.
The NXL Marine Amplifier series is exactly what the outdoors lover will need for their boat or vehicle audio to brave the trails, enjoy the lake, or any situation that needs a strong versatile waterproof amplifier.
Features:
Multiple channel input selector - 2 or 4 channel
IPX6 Waterproof for Powersports applications
Ultra-compact size for easy installation
Audio precision quality control verification
Technical Specifications:
Number of Channels - 1
Frequency Response - 10Hz - 250KHz
2 Ohm RMS Power (14.4V) Per Channel - 600W
4 Ohm RMS Power (14.4V) Per Channel - 350W
Signal-to-Noise Ratio - >82dB
Product Dimensions: (L x W x H) - 11.8" x 4.4" x 1.77" (302mm x 112mm x 45mm)
*Sold as an Individual
|
599.94 |
|
|
MS-AM504 4-Channel Marine Amplifier - 500W
Features:
Marine Grade Chassis - Stainless steel end caps and bottom plate provide a stunning finish with added environmental protection.
Heat Sink Technology - Heat sink technology transfers heat more efficiently and offers more thermal stability for maximum component reliability.
Class-AB Design - The 500 Watt 2-Ohm stable (per channel) design ensures clean and powerful amplification of the input signal,enough to rock the boat.
Conformal Coated Circuitry - Provides added protection from salt air and moisture to ensure maximum product life.
RCA Line Out - A pass through RCA output enables linking of multiple amplifiers for enhanced system performance.
4 Channels - Capable of powering 4 speakers, a sub and a pair of speakers or 8 speakers in parallel (2 speakers per channel in parellel @ 2 Ohms).
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
277.36 |
|
|
Apollo™ Monoblock & 4 Channel Marine Amplifier Mounting Bracket
Use this mounting bracket to easily install your Apollo Monoblock or 4 channel marine amplifier. Simply secure the mounting bracket to a flat surface and clip the amplifier in place, for a clean and tidy finish.
Technical Specifications:
Dimensions (WxHxD) - 4.72" x 6.08" x .39"
In the Box:
Mounting bracket
Four 8-gauge, self-tapping screws
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.23 |
|
|
Apollo™ 6 & 8 Channel Marine Amplifier Mounting Bracket
Use this mounting bracket to easily install your Apollo 6/8 channel marine amplifier. Simply secure the mounting bracket to a flat surface and clip the amplifier in place, for a clean and tidy finish.
Technical Specifications:
Dimensions (WxHxD) - 7.87" x 6.08" x .39"
In the Box:
Mounting bracket
Four 8-gauge, self-tapping screws
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.23 |
|
|
MS-AM402 2 Channel Marine Amplifier - 400W
Features:
Marine Grade Chassis - Stainless steel end caps and bottom plate provide a stunning finish with added environmental protection.
Heat Sink Technology - Heat sink technology transfers heat more efficiently and offers more thermal stability for maximum component reliability.
Class-AB Design - The 400 Watt 2-Ohm stable (per channel) design ensures clean and powerful amplification of the input signal,enough to rock the boat.
Conformal Coated Circuitry - Provides added protection from salt air and moisture to ensure maximum product life.
RCA Line Out - A pass through the RCA output enables linking of multiple amplifiers for enhanced system performance.
2 Channels - Capable of powering 2 speakers, a sub (bridged) or 4 speakers in parallel.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
186.82 |
|
|
R1 550.2 2-Channel Marine Amplifier
Roswell’s R1 550.2 is the ideal amp to run an R1 tower speaker setup. It’s a 2-channel Class-D design that puts out 165 watts RMS per channel at 4Ω and 275 watts RMS per channel at 2Ω. It features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCBs, and nickel-plated marine-grade wire terminals.
Features:
Ch 1-2 calibrated crossover (FULL/HPF/LPF)
Space-saving stackable design
Bridgeable 2-channel design
Marine-grade durability
4 Ohm Stable at 165 watts per channel
High-Efficiency Class-D Topology
2 Ohm Stable at 275 watts per channel
Conformal-coated PCBs
The lit logo power indicator lets you know your amp is receiving power
Nickel-plated wire terminals
Switchable Differential RCA inputs minimize interference and induced noise
Specifications:
Continuous Power (RMS): 4Ω: 165W x 2 / 2Ω: 275W x 2
Bridged: 4Ω: 550W x 1
Frequency Response: 10Hz – 25Hz
Input Sensitivity: 0.2–10.0V
HPF (High Pass Filter): 30Hz – 300Hz
LPF (Low Pass Filter): 30Hz – 300Hz
Bass EQ: 0-18dB @ 45Hz
Subsonic Filter: 10Hz – 55Hz
Phase Control: 0-180º
Dimensions: Inches: 1.90 x 7.0625 x 11.125 Centimeters: 4.83 x 17.94 x 28.26
|
330.00 |
|
|
ME70BT IPX6 4-Channel Marine Amplifier
Features:
Remote display keypad
4x45 Audio power out
100 Meter Bluetooth range
Phone/Android charging
USB music Player
AUX input
NMEA 2000® certified
Multiple EQ preset options
Backlit 3 line display with adjustable illumination
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
129.59 |
|
|
R1 650.4 4-Channel Marine Amplifier
The R1 650.4 marine-grade amplifier from Roswell, is everything a boat's audio system has always wanted. These stackable amplifiers utilize a 4-channel Class-D design that puts out 100 watts RMS per channel at 4Ω and is perfect for powering an R1 6.5″ marine speaker setup.
Easily bridge and tune with the calibrated crossover controls. Because LEDs create lots of noise issues, this amp features differential RCA inputs for maximum noise rejection. The R1 650.4 is built with fully conformal-coated PCBs and nickel-plated marine-grade wire terminals to ensure their quality.
Features:
Ch 1-4 calibrated crossover (FULL/HPF/LPF)
Space-saving stackable design
Bridgeable 4-channel design
Marine-grade durability
2 Ohm Stable at 165 watts per channel
High-Efficiency Class-D Topology
Conformal-coated PCBs
The lit logo power indicator lets you know your amp is receiving power
Nickel-plated wire terminals
Switchable Differential RCA inputs minimize interference and induced noise
Specifications:
Continuous Power (RMS): 4Ω: 100W x 4 / 2Ω: 165W x 4
Bridged: 4Ω: 300W x 2
Frequency Response: 10Hz – 25Hz
Input Sensitivity: 0.2–10.0V
HPF (High Pass Filter): 30Hz – 300Hz
LPF (Low Pass Filter): 30Hz – 300Hz
Bass EQ: 0-18dB @ 45Hz
Subsonic Filter: 10Hz – 55Hz
Dimensions: Inches: 1.90 x 7.06 x 11.125 Centimeters: 4.83 x 17.94 x 28.26
|
517.09 |
|
|
R1 900.6 6-Channel Marine Amplifier
The R1 900.6 marine-grade amplifier from Roswell is everything a boat's audio system has always wanted. Utilizing a 6-channel Class-D design that puts out 100 watts RMS per channel at 4Ω, these amps are perfect for powering an R1 8″ and R1 6.5″ marine speaker setup.
This amp features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCBs, and nickel-plated marine-grade wire terminals.
Features:
Ch 1-6 calibrated crossover (FULL/HPF/LPF)
Space-saving stackable design
Bridgeable 6-channel design
Marine-grade durability
2 Ohm Stable at 165 watts per channel
High-Efficiency Class-D Topology
Conformal-coated PCBs
The lit logo power indicator lets you know your amp is receiving power
Nickel-plated wire terminals
Switchable Differential RCA inputs minimize interference and induced noise
Specifications:
Continuous Power (RMS): 4Ω: 100W x 6 / 2Ω: 165W x 6
Bridged: 4Ω: 300W x 3
Frequency Response: 10Hz – 25Hz
Input Sensitivity: 0.2–10.0V
HPF (High Pass Filter): 30Hz – 300Hz
LPF (Low Pass Filter): 30Hz – 300Hz
Bass EQ: 0-18dB @ 45Hz
Dimensions: Inches: 1.90 x 7.06 x 13.67 / Centimeters: 4.83 x 17.94 x 34.74
|
694.28 |
|
|
MA754AM 4-Channel Amplifier - 75W
The marine A754 4-channel amplifier delivers a powerful 75-watt RMS to each of the front and rear speakers in a boat. You can also bridge the amp to 2-channel mode to drive a couple of subs with a 200-watt RMS or 3-channel mode to drive both a pair of full-range speakers and a subwoofer.
Speaker-level inputs allow this amplifier to integrate into almost any system, even one using a marine factory radio. Separate high-pass and low-pass crossovers on the front and rear channels allow users to dial in the perfect roll-off to best suit speaker placement and cabin acoustics.
Features:
Compact size
High and low-level input
Variable crossover and bass boost
Low noise and distortion
Input Level Control
Full on-board protection
Phase Switch
RBC wired remote
Class D amp technology
Turn-on mode
General Specifications:
4-channel marine amplifier
75 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
Variable high- and low-pass filters (32-320 Hz, 12 dB/octave) on front and rear channels
Preamp and speaker-level inputs
Preamp outputs
Fuse rating
30A x 2
8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
Dimensions (W x H x D) 320mm x 51.3mm x 180mm (12-5/8” x 2-1/16" x 7-1/8”)
What’s in the Box:
One marine A754 4-channel amplifier
4 Bare wire-to-RCA adapters
Four 30A ATO fuses (2 installed, 2 spare)
Two JBL stickers
Owner's Manual
4 Mounting screws (M4 x 53mm)
1 logo badge
|
269.21 |
|
|
6.5" Coaxial Marine RGB Speakers - White STADIUM Series
JBL's STADIUM Series is the luxury line, ready to create any boat into a concert experience. With a removable mid tweeter, the sound stage can be raised to accommodate the discerning musical palette.
Features:
White
6.5"
100W RMS
300W Peak
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
258.00 |
|
|
Select S-1100.2 2 Channel Amplifier - 1800W
The SELECT series of amplifiers by DS18 is known for two things - legendary power and striking elegance.
This brushed aluminum amplifier adds a nice touch of sleekness to your sound system. Each amplifier has adjustable crossover settings, gain control, and Hi/Lo pass filters to deliver powerful and accurate sounds that will make you feel like you’re in a concert.
Own an elegant amplifier that provides awesome power and amazing reliability.
Features:
Surface mount component technology
Audio precision quality control verification
Multilayer PCB trace layout
Clipping, power, and protection LED indicator
Short circuit, thermal, and voltage protection
Precise filters so you can get the perfect sound from your speakers
Technical Specifications:
Number of Channels - 2
Frequency Response - 20Hz - 200KHz
2 Ohm RMS Power (14.4V) Per Channel - 2 x 80W
4 Ohm RMS Power (14.4V) Per Channel - 2 x 60W
Signal-to-Noise Ratio - >90dB
Product Dimensions: (L x W x H) - 7.4" x " x 1.87" (18.8 x 5.83 x 4.75 cm)
*Sold as an Individual
|
149.94 |
|