|
Sealink Deluxe 12 Volt Receptacle
12VRC
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
11.99 |
|
|
SeaLink® Deluxe 12 Volt Plug
Moisture proof sealing ring
LED power indicator light
Interchangeable 10A fuse
Internal strain relief and cord seal
Compatible with standard 12V receptacles
Max. rating is 10A
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.96 |
|
|
SeaLink® Deluxe Dual USB Charger & 12V Receptacle
12VDC input
Dual USB has 5V, 2.1 amp total output
LED power indicator light for USB
Receptacle has 12VDC output, rated up to 20 amps
Water resistant covers protects against dust and water
Insulated terminals included
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.50 |
|
|
SeaLink® Deluxe Dual USB Charger Receptacle
12 to 24VDC input
5v, 2.1 amp total output
LED power indicator light for USB
Water resistant cover protects against dust and water
Insulated terminals included
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.54 |
|
|
Stainless Steel 12V Receptacle with Cap
12-Volt Receptacle - High quality, 12V female socket with watertight cap. Stainless steel construction.
Features:
AFI 12V stainless steel receptacle with cap
High quality, 12V female socket, with water tight cap
Highly recommended and durable
Stainless Steel construction
12V female socket
Includes watertight cap
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
18.06 |
|
|
1-1/4" Electric Clutch Pump - Double A Groove Pulley - 12V
Jabsco pump with 1-1/4" clutch
Features:
12V
Double A Groove Pulley
1-1/4" Electric Clutch Pump
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1514.70 |
|
|
E1 Single Speed Electric Motor Conversion Kit for 28ST Winch - 12V
The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button.
This conversion kit fits an Andersen 28ST winch
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
|
2599.52 |
|
|
E1 Single Speed Electric Motor Conversion Kit for 34ST Winch - 12V
The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button.
This conversion kit fits an Andersen 34ST winch
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
|
2599.52 |
|
|
E1 Single Speed Electric Motor Conversion Kit for 40ST Winch - 12V
The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button.
This conversion kit fits an Andersen 40ST winch
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
|
2599.52 |
|
|
E1 Single Speed Electric Motor Conversion Kit for 46ST Winch - 12V
The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button.
This conversion kit fits an Andersen 46ST winch
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
|
2599.52 |
|
|
E1 Single Speed Electric Motor Conversion Kit for 50ST Winch - 12V
The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button.
This conversion kit fits an Andersen 50ST winch
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
|
2599.52 |
|
|
Sealink 12V Plug & Receptacle
12VPK
Product Features:
SeaLink Deluxe 12 Volt Receptacle and Plug
Part Nos. 12VRC & 12VPG packaged together
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.52 |
|
|
Premium-quality DC Receptacle
The patented Marinco® ConnectPro® Receptacle features unique locking blades with the industry's largest surface-area for maximum surface contact and electrical conductivity.
ConnectPro® connections are weather resistant.
The marine-grade design includes corrosion resistant, plated-brass electrical components, and a watertight sealing cap.
The receptacle has Marinco's exlusive Perma-Lock™ terminals, meaning they virtually never need to be retichtened
An O-ring seals out moisture while plugged into the receptacle.
WARNING: This product can expose you to chemicals including Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
|
25.18 |
|
|
ConnectPro® Charging/Trolling System Receptacle & Plug
ConnectPro® Receptacle
Universal design for 2 or 3-wire configuration 12, 24, 12/24, 24/36 or 36 volt systems
Watertight sealing cap
Corrosion resistant, plated brass electrical components
Drain holes in receptacle keep water away from electrical components
Perma-Lock™ screw terminals will not loosen under extreme hull vibration
Standard 1-1/8" diameter mounting hole
Easy to install, with supplied mounting plate for front panel installation, or locking ring for rear access installation
Accepts 10 and 8 gauge wire
Easily replaces other trolling motor plugs and receptacles
ConnectPro® Plug
O-ring seal for waterproof connections
Weather resistant plug cover
Corrosion resistant, plated brass electrical components
Accepts 16 to 8 gauge wire
Ergonomic contoured grip for easy hook-up and ground blade alignment
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
42.61 |
|
|
Waterproof Wiper Motor 12V - 2.5" Shaft - 80° Sweep
The 1.5 Waterproof Wiper Motor is made with a fully sealed powder coated aluminum waterproof base and housing to power a 22" Deluxe arm and 22" Deluxe blade combination or a 20" Premier arm and 20" Premier blade combination.
Features:
Available in three shaft lengths: 1.5", 2.5" and 3.5" (includes .5" length of knurled arm fitting)
Factory pre-set sweep angles of 80 degrees or 110 degrees, with easy adjustment to 45 degrees or 60 degree
Chrome plated solid brass knurled drive nut with brass and stainless steel driveshaft
Two-speed motor
Sealed 6" wire leads, 16 AWG
Adjustable right or left self-parking
0.625" diameter shaft (16 mm)
Available in 12V and 24V models
Coast to park
RF shielded circuitry
Retail version includes 5 amp fuse and holder (operating switch not included)
Measures approximately 7.75" L x 4" W x 2.75" D
Stall torque: 109 in-lbs (125 kgf/cm; 12.3 Nm)
Stall current: 11.5-13.0 amps
No load current: 0.5-1.2 amps
Replaces AFI 2000 motor
|
231.17 |
|