18" Antenna Extender - White Constructed of high-quality reinforced fiberglass and finished to match Digital Antennas award-winning antennas, our antenna extenders are used to increase the height of an antenna to improve effective range or to place an antenna above on-board obstructions that may interfere with proper radiation. All extenders mount standard 1"14 threaded mounts. Use a center brace when the combined length of your antenna and all extensions is more than 8' Features: Heavy duty fiberglass Stainless steel ferrules 1"14 threaded top and base High gloss urethane finish This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

4' VHF Antenna Digital Antenna's 1100 series antennas with a collet ferrule ensure no cable twisting and allows the antenna to be removed when needed. This new technique allows the use of existing coax or a new run of premium low loss cable. A taperedcollet securely locks Digital Antenna's 1100 series antenna to the bottom ferrule which mounts standard 1"-14 threads. All marine antennas are manufactured in the USA with 316 surgical stainless, UV stable high gloss finish and precision soldered components. Features: Sleek, rugged design Locking collett allows antenna to be attached without twisting cable Large connector pass thru Mounts to standard 1"-14 mount or mount with U-bolt to a pole This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Wideband 695-3000 MHz Omni-Directional Bullet Antennas   Featured Products!   Digital Antenna's newest antenna, known as the bullet, provides excellent performance from LTE to WiMax and is ideal for mobile or fixed locations. Maximum performance and distance is achieved with its physically resonant design and outstanding VSWR of less than 1.5:1 in all 3G and 4G bands.           Specials     Rebates    Close Outs     Remanufactured

Extension Cable f/500 Series VHF/AIS Antennas - 10' An easy solution to extending the cable on Digital Antenna's 500 series VHF and AIS antennas. Simply connect the included double mini-UHF male adapter between the 500 series antenna's mini-UHF female connector and the 500 series extension cable's mini-UHF female connector. The cable's other end accepts the 500 series antenna's PL-259 adapter. All Extension Cables for 500 Series VHF/AIS Antennas Feature: Our exclusive low loss, tinned braid, foil shielded, UV stable RG-8X marine cable Factory attached mini-UHF female and mini-UHF female connectors DA624 mini-UHF double male adapter

Extension Cable f/500 Series VHF/AIS Antennas - 20' An easy solution to extending the cable on Digital Antenna's 500 series VHF and AIS antennas. Simply connect the included double mini-UHF male adapter between the 500 series antenna's mini-UHF female connector and the 500 series extension cable's mini-UHF female connector. The cable's other end accepts the 500 series antenna's PL-259 adapter. All Extension Cables for 500 Series VHF/AIS Antennas Feature: Our exclusive low loss, tinned braid, foil shielded, UV stable RG-8X marine cable Factory attached mini-UHF female and mini-UHF female connectors DA624 mini-UHF double male adapter

532-VW-S 16' Antenna - White 10dB Gain A favorite of marine professions, our largest VHF antennas offer the power and durability to achieve maximum range and extended performance, even in the roughest seas. A powerful gain of 10dB and solid construction make Digital Antennas 16 VHF antennas the ideal choice for critical communication onboard large yachts, commercial vessels and base stations. Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors. All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. UPS shippable. Our 16' VHF antennas require a side support 3' to 4' from the base of the antenna. All 16' VHF Antennas Feature: Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 10dB gain 500 GOLD Series: Mount: Standard 1"14 threaded base Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter Cable: Includes 20 of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Antenna Extenders Constructed of high-quality reinforced fiberglass and finished to match Digital Antennas award-winning antennas, our antenna extenders are used to increase the height of an antenna to improve effective range or to place an antenna above on-board obstructions that may interfere with proper radiation. All extenders mount standard 1"14 threaded mounts. Use a center brace when the combined length of your antenna and all extensions is more than 8' All Antenna Extenders Feature: Heavy duty fiberglass Stainless steel ferrules 1"14 threaded top and base High gloss urethane finish 528-EW Dimensions: 4' - 1" O.D.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Cell 18" 288-PW Dual Band Antenna - 9dB Omni Directional Digital Antenna's 288-PW universal 18" dual band cellular antenna is ideal for many applications, including boats, RVs, homes and offices. This omni-directional 9dB gain cellular antenna improves signals on cellular (810-900 MHz) and PCS (1800-1990 MHz) bands, offering excellent performance in a compact design. When communication is critical, our award-winning antennas make the connection. Model 288-PW is the same outside antenna that is included with the PowerMax 4KSBR-50U Small Building Repeater System and 4KMR-30U Mobile Repeater System. All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. Features: Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 9dB gain This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

544-SSW-RS Single Side Band Antenna w/RUPP Collar - White ** Designed to be used with RUPP Antenna Mounts ** When the range of a VHF radio just won’t do, offshore vessel operators choose Digital Antenna’s high performance Single Side Band antennas for exceptional communication over the entire HF frequency range. Heavy duty construction for use in the roughest seas, Digital Antenna SSB antennas are a popular choice for boaters when durability, performance and great looks are prerequisites. Available in 16’ or 24’ lengths to accommodate even the most pristine of motor yachts.  Features: Powerful brass radiators Soldered connections Centering foam insulator High gloss urethane finish Mount: Standard 1”–14 threaded base RF Termination: 1/4”- 20 stainless steel stud Cable: Not included Specifications: Radiation Pattern: Omni-Directional Max Input Power: 1000W Exterior Finish: White, UV stable poly-urethane coating Ferrule: 316 Stainless Steel Installation: 1"-14 female threads Wire (not included): Use 10-12 AWG high voltage insulated wire This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

8' Wide Band Antenna with 20' Cable Utilizing technology designed for military and commercial applications, Digital Antenna delivers our new, highly advanced 8' Wide Band VHF Antennas to the marine industry. These antennas provide tactical maritime users with a high-performance solution for broadband VHF communications. Featuring a tremendous bandwidth of 134 to 176 MHz, a nominal 6dB gain, and the ability to withstand continuous RF power up to 150 watts, the new antennas facilitate high-quality communications across a normally hard-to-cover band. An exclusive patent-pending electrical design with an internal ground plane allows the antenna to maintain a low radiation pattern, resulting in exceptional communication capability over a wide bandwidth. Designed to meet the military’s rigorous MIL-STD-810 environmental engineering testing, as well as typical marine standards for high seas applications, the 992-MW and 992-MB antennas, are built to endure environmentally harsh conditions. They are designed for use with a multitude of services including auxiliary civil services, 2-meter amateur radio band, VHF business band, multi-use radio service (MURS), 2-way land mobile, VHF marine radio, narrowband FM, VHF SATCOM, Automatic Identification System (AIS) and NOAA weather stations. Digital Antenna’s quality components include a rugged hard-coated anodized finish over an aircraft-grade aluminum ferrule, soldered brass radiating elements, power directing ferrite choke bead, and high-gloss UV stable coating. Manufactured in the USA by skilled craftsmen, our antennas are hand tested and tuned to assure the highest possible performance, quality, and durability. Lifetime limited warranty. Features: Broadband 134-176 MHz Withstands continuous RF power up to 150 watts Aircraft-grade aluminum ferrule Completely sealed High performance 6dB gain Sleek mono-color design Lifetime limited warranty Mount: Standard 1”–14 threaded base Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter Cable: Includes 20’ exclusive low-loss, tinned braid, foil shielded, UV stable DA195 Ultra-Flex marine cable

532-VW-RS 16' White VHF f/RUPP Mounts 10dB Gain ** Designed to be used with RUPP Antenna Mounts ** A favorite of marine professions, our largest VHF antennas offer the power and durability to achieve maximum range and extended performance, even in the roughest seas. A powerful gain of 10dB and solid construction make Digital Antenna's 16' VHF antennas the ideal choice for critical communication onboard large yachts, commercial vessels and base stations. Customers and installers love the 500 GOLD Series' easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors. All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. UPS shippable. 16' VHF antennas require a side support 3' to 4' from the base of the antenna Features: Pre-installed RUPP collar Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 10dB gain Cable: Includes 20’ of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable Mount: Standard 1"–14 threaded base (RUPP support arm required) Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

549-EW-S 8' Antenna Extender - White Constructed of high-quality reinforced fiberglass and finished to match Digital Antennas award-winning antennas, our antenna extenders are used to increase the height of an antenna to improve effective range or to place an antenna above on-board obstructions that may interfere with proper radiation. All extenders mount standard 1"14 threaded mounts. Use a center brace when the combined length of your antenna and all extensions is more than 8' All Antenna Extenders Feature: Heavy duty fiberglass Stainless steel ferrules 1"14 threaded top and base High gloss urethane finish Tapered Extender Dimensions: 8' - 1.5" O.D. Use center brace This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Digital Antenna Digital Antenna is the world leader in marine, land antenna, cellular signal amplifier and repeater technology. Our award winning antennas, cellular amplifiers and repeaters extend the range of your marine, RV, car, truck, home and office communications. Its easy to stay connected on land or at sea with Digital Antenna.

529-VW-S 8' VHF Antenna - White 6dB Gain Digital Antenna's ultimate, award-winning 8' VHF antennas combine 6 dB gain, ruggedness and a pristine finish to give you the most superior antenna available. Even in the harshest conditions, these antennas will maintain their beautiful glossy finish for years. Built to withstand high speeds, these antennas are ideal for radar arches and T-tops on speedboats, yachts and commercial vessels. Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors. All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. 8' VHF Antennas Feature: Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 6dB gain 500 GOLD Series: Mount: Standard 1"14 threaded base Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter Cable: Includes 20' of our low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

4' VHF/AIS White Antenna with 15' Cable The 594-MW is one antenna designed for the best performance on VHF and AIS signals. To ensure the most incredible AIS and VHF range, Digital Antenna’s new 4.5dB gain AIS/VHF antenna features a less than 1:5:1 SWR on both the VHF (156MHz) and AIS (162MHz) frequencies. Digital VHF radio-based transponder systems need antennas designed for digital signals. Digital Antenna is the only manufacturer to design all antennas to maintain and maximize digital signals for the best transmit and receive range. Ideal for use on any size commercial or recreational vessel. Perfect for use with combined VHF/AIS radios. Factory-installed mini-UHF connector (less than 3/8” OD) and included PL259 adapter make a quick and secure connection to the radio. (no soldering needed). Features: Designed for Digital AIS/VHF signals 4.5dBi Omni-directional gain Rugged fiberglass rod with UV stable finish Secure soldered connections 316 stainless steel base 1”x14 female threaded base 15’ premium low-loss RG-8X cable Factory-installed mini-UHF connector 5-year warranty Specifications: Radiation: Pattern Omni-Directional Gain: 4.5dBi Bandwidth: VSWR: < 1.5:1 = 1 56-162.5 MHz (6.5MHz) Cable: 15’ Digital Antenna exclusive low loss RG-8X Impedance: 50 ohms Max Input Power: 50 watts Exterior Finish: White polyurethane high gloss UV stable Dimensions: 4’ length x 1” OD taper Weight: 1.7 lbs RF Connector: Mini-UHF female with included PL259 adapter Installation: 1”x14tpi female threaded base Elements: Brass - Hand soldered Polarization: Vertical Wind Rating: >160KPH Operating Temp: 30º F to +175º F Warranty: 5 Years Compliance: Automatic Identification System (AIS) Use with all AIS class A and B transceivers, AIS transponders, Smart AIS transponders, AIS receivers, auxiliary civil services, multi-use radio service (MURS), 2-way land mobile, VHF marine radio, narrow band FM, VHF SATCOM, Automatic Identification System (AIS), and NOAA Weather Stations. Applications:  Commercial Recreational Government vessels where AIS is required