Digital Automatic Charger - 1 Amp Vexilar Quick Connect system will connect directly to your Vexilar pack for charging. If yoursystem  does not have the quick connect system you can use the supplied  gator clip option for charging. The V-410 is a fully automatic 1 amp digital charger. It also serves as a battery maintainer. After the charger bring the battery to a full charge, it automatically switches to a float mode. The battery is held at a full charge until you're ready to use it. The storage period is the most difficult part your batteries life. During this time, the battery can degrade, sulfate, and be unusable when you need it. That's why you need to maintain the battery during storage periods. You could mark your calendar and charge your battery each month, or you could connect this Universal 12 Volt Automatic Charger and be assured that your battery will be ready to go when you are. Features: Fully Automatic 3- Stage Charging 1 Amp 12 Volt Output Digital Operation - No Heavy Transformer Will NOT Overcharge the Battery When Full, Maintains the Battery Charge Colored LEDs Indicate Charge Mode Connect it and Forget it Quick connect feature for Vexilar packs or use supplied gator clips direct to battery for charging. Specifications: 12 Volt / 1 Amp DC Output 100 - 240 Volt AC, 22 Watt Input 50/60 Hz Class 2 Battery Charger UL Approved One Year Warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProTournament 240elite Triple Charger - 24 Amp, 3 Bank Tournament Winning Technology The fastest battery charger with the most features in its class. Specifically designed to deliver maximum charging performance and extend battery life. Get on the water first and stay there longer with tournament winning technology providing: 100% charge upon completion of multi-stage charging process. 100% charging output with AC power as low as 90 VAC. 50% lighter and 2 to 3 times faster than traditional chargers. Give your batteries what they demand with ProTournamentelite's three (3) digitally selectable "performance matched" 5-stage charge profiles. Using 100% of the available charging amps, ProTournamentelite's Distributed-On-Demand™ Charging technology will always distribute its full charging output to the combination of batteries connected to it as required by the discharge state of each battery. Features: Professional Performance for Fastest Charge Times Designed to deliver maximum charging performance and extend battery life Tournament Winning Technology 100% charge upon completion of multi-stage charging process. 100% charging output with AC power as low as 90 VAC. 50% lighter and 2 to 3 times faster than traditional chargers. Digital LED Display with Dual Mode Battery Status Monitor Intuitive LED display with charge mode indicators and real time charge level status with an on-the-water push-to-test feature for percent of battery power remaining. 3 Selectable Performance Matched Charge Profiles Profiles include: Standard Flooded/AGM batteries, HP AGM1 for pure lead AGM batteries like OPTIMA Blue Top Marine Batteries, HP AGM 2 for pure lead AGM Batteries like Odyssey Marine Batteries. Waterproof Connector Port for Optional Status Remote Optional tri-color LED charge mode status remote can be placed up to 12' away from the charger. Digital 5-Stage Charging with Temperature Compensation Analyzes connections and the ability for a battery to accept a charge, advance high fill rate charging, conditioning, auto maintain (energy saving mode) and automatic once a month storage recondition mode automatically monitors ambient temperatures and adjusts its charging output. System OK & Individual Battery Trouble Status Indicators Advanced technology eliminates time consuming trouble shooting by clearly indicating system and battery connections are OK or if a fault is present on a specific battery bank. Built-in Safety & Pre-Wired for Easy Installation Shock resistant, space saving extruded aluminum design, dual in-line DC safety fuses for trolling motor and house batteries, over-voltage, overload, over-temperature, reverse polarity and ignition protection. Distributed-On-Demand™ Technology Digital LED Display with Dual Mode Battery Status Monitor Charge level indicator with on-the-water push-to-test button System Check OK and battery trouble status indicators 3 Selectable Performance matched charge profiles 3 Selectable Performance Matched Charge Profiles Standard Flooded/AGM batteries, HP AGM1 for pure lead AGM batteries like OPTIMA Blue Top Marine Batteries, HP AGM 2 for pure lead AGM Batteries like Odyssey Marine Batteries Waterproof Connector Port for Optional Charge Status Remote Tri-color LEDs indicates charge mode status Remote not included Digital 5-Stage Charging Analyzing, advance high fill rate charging, conditioning and auto maintain (energy saving mode) Automatic once a month storage recondition mode How Distributed-On-Demand™ Charging Technology Works ProTournamentelites Distributed-On-Demand™ Charging Technology ensures 100% of the available charging amps are fully utilized to meet the demand of each battery on-board. For example, if your engine start battery only needs 2 amps from your ProTournamentelite, the unused 6 amps will automatically be Distributed-On-Demand™ to your house or trolling motor batteries, providing 11 amps to each of your deep cycle batteries for faster charging. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProTournament 240 elite Dual Charger - 24 Amp, 2 Bank Tournament Winning Technology The fastest battery charger with the most features in its class. Specifically designed to deliver maximum charging performance and extend battery life. Get on the water first and stay there longer with tournament winning technology providing: 100% charge upon completion of multi-stage charging process. 100% charging output with AC power as low as 90 VAC. 50% lighter and 2 to 3 times faster than traditional chargers. Give your batteries what they demand with ProTournamentelite's three (3) digitally selectable "performance matched" 5-stage charge profiles. Using 100% of the available charging amps, ProTournamentelite's Distributed-On-Demand™ Charging technology will always distribute its full charging output to the combination of batteries connected to it as required by the discharge state of each battery. Features: Professional Performance for Fastest Charge Times Designed to deliver maximum charging performance and extend battery life Tournament Winning Technology 100% charge upon completion of multi-stage charging process. 100% charging output with AC power as low as 90 VAC. 50% lighter and 2 to 3 times faster than traditional chargers. Digital LED Display with Dual Mode Battery Status Monitor Intuitive LED display with charge mode indicators and real time charge level status with an on-the-water push-to-test feature for percent of battery power remaining. 3 Selectable Performance Matched Charge Profiles Profiles include: Standard Flooded/AGM batteries, HP AGM1 for pure lead AGM batteries like OPTIMA Blue Top Marine Batteries, HP AGM 2 for pure lead AGM Batteries like Odyssey Marine Batteries. Waterproof Connector Port for Optional Status Remote Optional tri-color LED charge mode status remote can be placed up to 12' away from the charger. Digital 5-Stage Charging with Temperature Compensation Analyzes connections and the ability for a battery to accept a charge, advance high fill rate charging, conditioning, auto maintain (energy saving mode) and automatic once a month storage recondition mode automatically monitors ambient temperatures and adjusts its charging output. System OK & Individual Battery Trouble Status Indicators Advanced technology eliminates time consuming trouble shooting by clearly indicating system and battery connections are OK or if a fault is present on a specific battery bank. Built-in Safety & Pre-Wired for Easy Installation Shock resistant, space saving extruded aluminum design, dual in-line DC safety fuses for trolling motor and house batteries, over-voltage, overload, over-temperature, reverse polarity and ignition protection. Distributed-On-Demand™ Technology Digital LED Display with Dual Mode Battery Status Monitor Charge level indicator with on-the-water push-to-test button System Check OK and battery trouble status indicators 3 Selectable Performance matched charge profiles 3 Selectable Performance Matched Charge Profiles Standard Flooded/AGM batteries, HP AGM1 for pure lead AGM batteries like OPTIMA Blue Top Marine Batteries, HP AGM 2 for pure lead AGM Batteries like Odyssey Marine Batteries Waterproof Connector Port for Optional Charge Status Remote Tri-color LEDs indicates charge mode status Remote not included Digital 5-Stage Charging Analyzing, advance high fill rate charging, conditioning and auto maintain (energy saving mode) Automatic once a month storage recondition mode How Distributed-On-Demand™ Charging Technology Works ProTournamentelites Distributed-On-Demand™ Charging Technology ensures 100% of the available charging amps are fully utilized to meet the demand of each battery on-board. For example, if your engine start battery only needs 2 amps from your ProTournamentelite, the unused 6 amps will automatically be Distributed-On-Demand™ to your house or trolling motor batteries, providing 11 amps to each of your deep cycle batteries for faster charging. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

HYDRO Flush Mount Full Range Digital Marine 4-Channel AMP w/Voltmeter - 1200W Whether you are the type of audio enthusiast that likes to hit the open road on his bike, ride the rough trails on your side by side, or cruise the open waters, you are going to need a powerful and waterproof rated amp that has a small footprint and also makes great power.  The F4 is an exact duplicate of the very popular NXL-400.4 but is now offered in flat-mount configuration so you can keep a flush and clean look to your install. DS18 has a line just for the job with the NXL series of amplifiers to power your whole system. This 5 channel amplifier helps you accommodate all your different speaker setups without having to look further. Being full range amps, these can be run on subs, mids, or tweeters because of the internal design of the amp.  All units have stable and reliable 4-layer PCB layouts, IPX67 rated for power sports, has an ultra-compact size for easy installation, and has audio precision quality control verification. Features: Flush / Flat mount design so you can keep your install looking clean and flush Stable and reliable 4 layers PCB layout design IPX67 Waterproof for Powersports applications Ultra-compact size for easy installation Audio precision quality control verification  Technical Specifications: Number of Channels - 4 Frequency Response - 20Hz - 20KHz 2 Ohm RMS Power (14.4V) Per Channel - 4 x 160W 4 Ohm RMS Power (14.4V) Per Channel - 4 x 100W 4 Ohm RMS Power Bridge (14.4V) Channel - 2 x 320W Signal-to-Noise Ratio - >95dB Product Dimensions: (L x W x H) - 238mm x 135mm x 41mm *Sold as an Individual

HYDRO Full Range Digital Marine 4-Channel Amplifier - 720W Whether you are the type of audio enthusiast that likes to hit the open road on his bike, ride the rough trails on your side by side, or cruise the open waters, you are going to need a powerful and waterproof rated  amp that has a small footprint and also make great power.  DS18 has a line just for the job with the NXL series of amplifiers to power your whole system. This 4 channel amplifier helps you accommodate for all your different speaker setups without having to look further. Being a full range amps, these can be run on subs, mids, or tweeters because of the internal design of the amp.  All units have stable and reliable 4-layer PCB layouts, IPX67 rated for power sports, has an ultra-compact size for easy installation, and has audio precision quality control verification. Features: Stable and reliable 4 layers PCB layout design IPX67 Waterproof for Powersports applications Ultra compact size for easy installation Audio precision quality control verification  Technical Specifications: Number of Channels: 4 Frequency Range: 20Hz - 20KHz Max Power:    720W  2 Ohm RMS Power Per Channel: 150W x 4 4 Ohm RMS Power Per Channel: 100W x 4 4 Ohm Bridged Power Per Channel:  260W x 2 Signal-to-Noise Ratio: 90 dB Dimensions (L x W x H) - 200mm x 93.4mm x 39.8mm *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MK-105PD Portable Digital Charger - 1 Bank & 5 Amp Power Trips You can take it with you. Our easy-to-use digital portable chargers feature Automatic Multi-Stage Charging to keep you on the water longer and are designed to extend the overall life of your batteries. Digitally Controlled - Digital ± Control Microprocessor design protects your batteries so you can stay on the water longer. It monitors temperature and state of charge to create a faster, regulated, more precise charge. Also includes automatic shut-off when charging is complete to extend battery life. Automatic Temperature Compensation Charging your batteries at higher or lower temperatures can damage your battery over time. So our chargers are designed to sense outside temperature fluctuations and adjust accordingly, delivering a fast, accurate charge. Multi-Stage Charging Minn Kota’s Multi-Stage Charging delivers a fast, precise charge profile by automatically controlling current and voltage without overcharging your batteries. Specifications: 1 Charging Bank 5 Amps Total Output Short circuit and reverse polarity For use with 12 volt system with 12V/6 cell lead-acid batteries including Flooded/Wet Cell, Maintenance Free and AGM/Starved Electrolyte 20-125 Amp hour rating FCC Compliant UL Listed WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1 AMP Lithium Battery Charger Only The technology of the 1 amp hour V-420 Lithium charger is designed primarily for use in charging Vexilar Lithium batteries, it is the first charger we know that is capable of charging both Lithium and SLA batteries very well. The easy-to-use charger lights show green when you have power and when the battery is fully charged.  Red tells you the charging cycle has engaged. A blinking red light will warn you that the battery is cold or terminal polarity is reversed.  Special charging instructions for SLA batteries can be found at www.vexilar.com.

Freedom SW3012 12V 3000W Inverter/Charger - 1-Year Warranty *Remanufactured Powerful. Configurable. Versatile. The Freedom SW series represents highly sophisticated and advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models. The second-generation 3000-watt model has been completely redesigned to include many of the same great features found in its high-power counterpart. A key feature enhancement is 'Generator Support Mode' which enables the Freedom SW to supplement a generator when AC loads exceed the generator's capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved for UL458 with marine supplement, CSA, ABYC, and FCC, Class B requirements. Parallel & Series Stacking Parallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output2. 2 AC source must be split phase, requires Stacking Cable (part# 808-9005) Designed for a variety of mobile applications such as commercial, emergency, and recreational vehicles, marine vessels, construction, and military equipment. Features: Pure sine wave output to operate sensitive electronics Advanced configuration options for customized applications Parallel and series stacking capability Built-in transfer switch automatically transfers between inverter power and incoming AC power Power factor corrected, multi-stage charger for fast, efficient charging Temperature-compensated charging for a variety of climate conditions The ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power3 Wide operating temperature range: -4°F to 140°F (-20°C to 60°C) Conformal coated circuit boards for humid environments Dual input / Dual output AC interface for 3000 W model Ability to charge batteries drained to extremely low voltage Compatible with the Xantrex Automatic Generator Start4 (Part# 809-0915) Protection Features: Battery over-voltage and under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection Integrated, resettable AC breakers 3When used with the remote panel 4Sold separately This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

HYDRO Full Rangle Digital Marine 2-Channel Amplifier - 600W Whether you are the type of audio enthusiast that likes to hit the open road on his bike, ride the rough trails on your side by side, or cruise the open waters, you are going to need a powerful and waterproof rated  amp that has a small footprint and also make great power.  DS18 has a line just for the job with the NXL series of amplifiers to power your whole system. This 4 channel amplifier helps you accommodate for all your different speaker setups without having to look further. Being a full range amps, these can be run on subs, mids, or tweeters because of the internal design of the amp.  All units have stable and reliable 4-layer PCB layouts, IPX67 rated for power sports, has an ultra-compact size for easy installation, and has audio precision quality control verification. Features: Stable and reliable 4 layers PCB layout design IPX67 Waterproof for Powersports applications Ultra compact size for easy installation Audio precision quality control verification  Technical Specifications: Number of Channels - 2 Frequency Range: 50Hz - 250KHz Max Power - 900W  2 Ohm RMS Power Per Channel - 150W x 2 4 Ohm RMS Power Per Channel - 100W x 2 4 Ohm Bridged Power Per Channel - 300W x 1 Signal-to-Noise Ratio - 90 dB Dimensions (L x W x H) - 7.87" x 3.68" x 1.57" *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

AC Charger 1-Bank, 100A, 12V Out, 110/220 In, IP66 Rated, Ruggedized & Wide Temp The BCA1550 Series battery charger provides up to 1000 watts of charging power to a one or two-bank battery system at 12, 24, 32, 36, 48, or 72 (Rail) VDC from an 85 – 264 VAC source. The BCA1550 Series chargers (BCA) and power supplies (PWS) are designed to supply a DC load or charge a battery at 12, 24, 32, 36, 48, or 72 (Rail) VDC. The 1550 family provides up to 1500 watts of precision power (the 1050 family supplies up to 1000 watts). The 1550 and 1050 families are identical to their previous models (1505 and 1005, respectively) in form, fit, and function as a direct drop-in replacement. Internally, the recently updated design incorporates a Power Factor Corrected (PFC) input stage allowing the charger to run continuously from 85 – 264 VAC at 50 or 60Hz with a Power Factor of 0.99 or better from 10% to 100% load. Heavy input filtering reduces EMI to extremely low levels to prevent interference with nearby sensitive electronics. These units are constructed from heavy-duty extruded aluminum chassis and aluminum ventilated front and rear panels with thermostatically controlled cooling fans and all stainless steel fasteners for rugged duty. Reliability features include LED status indicators, input circuit breaker, thermal shutdown, current limiting, reverse polarity connection protection, and output short circuit shutdown with automatic recovery. Features: Power Factor Corrected AC Input Fast and accurate charging Can function as a power supply Visual indicators for operation and errors Five-year parts and labor warranty Specifications: Input Voltage (AC): 85-265 VAC Input Current (Max Amps): 100 A Output Voltage (DC): 12 VDC Nominal Output VDC: 12 VDC Charging Current: 100 A Number of Battery Banks: 1 IP Rating: IP66 Mounting: Panel Approvals: CSA, UL Net Weight: 12 lbs Gross Weight: 12 lbs

AC Charger 1-Bank 100A 12V Out/110/220V In AC Chargers are available as two-stage or two and three-stage chargers capable of charging one or two banks of 12, 16, 24, 28, 32, 36, 48, 72V (rail) or other voltage battery banks, and are designed to quickly and accurately charge and condition batteries.

ATO/ATC Fuse Pack - 1 Amp - 25-Pack Features: Fast-acting type fuses ideal for electronic devices Standard circuit protection device for automobiles and trucks Tin-plated connector blades for corrosion resistance Specifications: Amperage: 1 Amp Maximum Voltage: 32V DC Interrupt Capacity: 1000A WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MP Pumps 23039 1" CLAMP

SUPRAX 1-Clamp w/3-Inserts One replacement clamp for SUPRAX or YAKRAX, includes inserts. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

12/24V Dual USB Charger - 1-1/8" Socket Mount Intelligent device recognition allows rapid charging of phones, tablets, or other mobile devices Charges at the speed required by specific devices Internal filtering for reduced electronic interference Over temperature protection Protective dust cap keeps debris and moisture out Conformal coated circuit board for the harsh marine environment Mounts in a common 1-1/8" hole Specifications Maximum Output Current:4.8A DC (total) Input Voltage:12V/24V DC Input Voltage Range:9-32V DC Output Voltage:5V DC ±5% Parasitic Current Draw:1mA Port Configuration:Intelligent Device Recognition Reverse Polarity Protection:Yes Short Circuit Protection:Yes Thermal Overload Protection:Yes WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.