|
Ideal for outboards and stern drives. Features polished stainless steel bezel, brushed aluminum dial with black pointer, scratch resistant curved lens and perimeter lighting. US & metric scales with ISO symbols where appropriate. 3" gauge requires 3-13/32" cutout, 2" gauge requires 2-1/8" cutout.
|
199.99 |
|
|
Ideal for outboards and stern drives. Features polished stainless steel bezel, brushed aluminum dial with black pointer, scratch resistant curved lens and perimeter lighting. US & metric scales with ISO symbols where appropriate. 3" gauge requires 3-13/32" cutout, 2" gauge requires 2-1/8" cutout.
|
109.99 |
|
|
Stylish stainless steel bezel design, black on white graphics. Domed glass sheds water and resists scratching. A comprehensive family of instruments for outboards, stern drives and inboards, including diesels. Lido instruments feature crisp white dials and fire-orange pointer tips. Red through-dial and white perimeter lighting for great night readability. NOTE: Mariner 30 & 40 HP 2-cylinder engines require a module (Merc. part no. 17461A2) when using Lido tachometer.
|
99.99 |
|
|
Chesapeake Black SS 4" Tachometer w/Systemcheck Indicator - 7000 RPM (Gas) (Johnson / Evinrude Outboard)
Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.
Tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.
By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.
These tachometers have a warning light system built into the dial that show off warning indicators when a fault is detected from the engine.
SystemCheck Warnings
No Oil
Engine Overheat
Check Engine
Low Oil
4" - Hole size: 3.375" (85mm)
For Engine Types:
(Johnson / Evinrude Outboard)
Specifications:
Anti-scratch glass lens
Perimeter lighted back light
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N TC9884
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
202.38 |
|
|
Chesapeake White SS 4" Tachometer w/Systemcheck Indicator - 7000 RPM (Gas - Johnson/Evinrude Outboard)
Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.
Tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.
By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.
These tachometers have a warning light system built into the dial that show off warning indicators when a fault is detected from the engine.
SystemCheck Warnings:
No Oil
Engine Overheat
Check Engine
Low Oil
4" - Hole size: 3.375" (85mm)
For Engine Types:
Johnson/Evinrude Outboard
Specifications:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N TC9881
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
202.38 |
|
|
Dress White 4" Tachometer w/Systemcheck Indicator - 7000 RPM (Gas) (Johnson /Evinrude Outboard)
Perimeter-lighted White dial with bold Black graphics, White aluminum bezel, contoured Black pointer and flat glass lens.
Tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.
By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.
These tachometers have a warning light system built into the dial that show off warning indicators when a fault is detected from the engine.
4" - Hole size: 3.375" (85mm)
SystemCheck Warnings
No Oil
Engine Overheat
Check Engine
Low Oil
For Engine Types:
(Johnson/Evinrude Outboard)
Specifications:
Anti-scratch glass lens
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N TC9887
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
179.22 |
|
|
Euro White 4" Tachometer w/ SystemCheck Indicator 7000 RPM (Gas) (Johnson / Evinrude Outboard)
Perimeter-lighted White dial with bold Black graphics, Black aluminum bezel, contoured White pointer and flat glass lens.
Tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed above.
By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.
These tachometers have a warning light system built into the dial that show off warning indicators when a fault is detected from the engine.
4" - Hole Size: 3.375" (85mm)
SystemCheck Warnings -
No Oil
Engine Overheat
Check Engine
Low Oil
Specifications:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
Perimeter-lighted Black dial
Can be adapted for 24 VDC systems
Factory P/N TC9886
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
161.99 |
|
|
Chesapeake White SS 4" Tachometer with Suzuki Monitor - 7000 RPM (Gas) (Suzuki Outboard)
Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.
Tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.
By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.
These tachometers have a warning light system built into the dial that show off warning indicators when a fault is detected from the engine.
SystemCheck Warnings:
Rev. Limit
Engine Overheat
Check Engine
Low Oil
4" - Hole size: 3.375" (85mm)
For Engine Types:
(Suzuki Outboard)
Specifications:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N TC4025
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
243.37 |
|
|
Specially designed to meet the unique requirements of modern 4-stroke recreational engines with or without catalyst systems. ZDDP anti-wear additive prevents phosphorus depletion to extend catalyst life and provide excellent anti-wear protection. Sierra Catalyst Compatible Oils provide leading wear protection and deposit control for engine longevity, corrosion protection from infrequent use and environmental contamination, enhanced detergent properties to prevent sludge formation, and reduced ending friction to maintain performance. Priced each, sold in case quantities only.
|
57.69 |
|
|
Specially designed to meet the unique requirements of modern 4-stroke recreational engines with or without catalyst systems. ZDDP anti-wear additive prevents phosphorus depletion to extend catalyst life and provide excellent anti-wear protection. Sierra Catalyst Compatible Oils provide leading wear protection and deposit control for engine longevity, corrosion protection from infrequent use and environmental contamination, enhanced detergent properties to prevent sludge formation, and reduced ending friction to maintain performance. Priced each, sold in case quantities only.
|
74.39 |
|
|
Fits: OMC 8/9.9-11 HP, 4 stroke - 1997-98; 9.9-15 HP - 1977-92. Replaces: O.M.C. 386430. 10-tooth drive gear. Uses DV369 replacement drive gear, SR369 repair kit.
|
168.67 |
|
|
Fits: OMC - 1997-Up 9.9/15 HP, 4-stroke. Replaces: O.M.C. 584608. 10-tooth drive gear. Uses DVK68 2-piece drive kit, SR368 repair kit.
|
174.20 |
|
|
For 4-stroke PWC applications. Replaces BRP 4-Tec 420956741, Yamaha SeaDoo 6M6-813E00-00.
|
13.99 |
|
|
Fits Yamaha Dash Mount 2 & 4 stroke, dual engine application. Heavy duty potted construction, minimal bleed per circuit. Rubber molded key combines OEM appearance and feel with a solid, secure grip in all conditions. Colors on wires match factory color codes. Colors on wires match factory color codes. Display packaged.
|
135.99 |
|
|
Fits Yamaha Dash Mount 2 & 4 stroke, dual engine application. Heavy duty potted construction, minimal bleed per circuit. Rubber molded key combines OEM appearance and feel with a solid, secure grip in all conditions. Colors on wires match factory color codes. Colors on wires match factory color codes. Display packaged.
|
222.69 |
|