|
12V Drop-In Low Profile Horn with Black & White Grills
Marinco is the leading supplier of horns to the marine industry, with over fifty years of experience in designing and manufacturing sound devices specifically for use in harsh marine environments. Stainless steel is used for all critical components such as trumpets, motor cover, diaphragms, assembly and mounting hardware. The latest addition is the "H" Horn Phase II, which is the loudest drop-in horn available today.
Features:
Comes with both white ASA and black ABS screw-in grills
Grills have water resistant fabric liners
Easy installation: 2.75" diameter hole x 1" deep
12 Volt, maximum amp draw: 4 Amps
New louder dB(A) rating: 111 dB at one meter
Fundamental frequency: 360 +/- 20Hz
Mounts from the outside, grill screws on for easy install
Easy retrofit
|
37.34 |
|
|
12V Drop-In "H" Horn with Black & White Grills
Marinco is the leading supplier of horns to the marine industry, with over fifty years of experience in designing and manufacturing sound devices specifically for use in harsh marine environments. Stainless steel is used for all critical components such as trumpets, motor cover, diaphragms, assembly and mounting hardware.
Features:
370 +/- 20Hz Fundamental Frequency
dB(A) Rating of 107 at one meter
|
33.96 |
|
|
Drop-In Hidden Horn w/ Black and White Covers
Low profile drop in horn with grills. Design allows easy installation. Easily retrofitted. Comes with black and white cover. 12V. Designed for ABYC standards for boats up to 20 meters.
|
31.67 |
|
|
DuraLED 50 Low Profile Interior/Exterior Lamp - White LED Spreader Beam
DuraLED 50LP offers increased light output in an ultra-low profile housing.
DuraLED 50LP lamps are an extremely powerful source of white light and offer a safe, energy efficient and reliable alternative to incandescent and fluorescent lighting within an easy to install, surface mount design.
These high tech, low profile lamps are available in two light patterns, Spread and Wide Spread, to suit a variety of applications including engine rooms, storage lockers, lazarettes and other heavy duty applications where reliability cannot not be compromised. Each lamp is completely sealed, UV, impact and shock resistant ensuring an ultra-long service life.
Multivolt™ circuitry provides constant illumination and circuit protection from 9-33V DC, even under severe voltage fluctuations. DuraLED 50LP lamps meet the requirements of ISO 8846 - Protection against ignition of surrounding flammable gasses by Electrical devices on Small Craft. For details please refer to the Standard.
Hella Marine DuraLED 50LP lamps offer class leading energy efficiency, unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant, enhanced impact acrylic
Color Temperature: 5000K (White)
Cable: Pre-wired with 2.5M of twin core marine cable
Operating Voltage: 9-33V DC
Voltage Protection: Spike protected to +500 volts, Reverse polarity protected to -700 volts
Power Consumption: < 12W
Degree of Protection: IP 67 - Completely Sealed
Weight: 380g (including cable)
Installation: Surface mount with robust bush mount
Approvals: CE, ISO 8846 (Ignition Protection)
|
123.04 |
|
|
Level Cup™ XL Low Profile Mount w/Large Strap Clamp Base
Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup™ XL keeps your drink upright, regardless of the conditions. This kit includes a standard length socket arm and hose clamp base for handlebars, rails and roll bars for ATV's and UTV's. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.
Koozie included with purchase of this product.
Common Beverage Sizes:
12oz Cans
Water Bottles
Insulated Cups
32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask)
Material: High Strength Composite and Marine Grade Aluminum
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag
Compatible Dimensions:
Width Range: 2.6" - 3.5"
Height Range: 3.75" - 11"
|
47.66 |
|
|
SM-F65CB SM Series 6.5" Shallow Mount Square Speakers - Black Cloth Grill - 100W
Unique shallow mount design without compromising on sound quality.
Fusion's SM Series shallow mount speakers, designed for installations where mounting depth is limited without compromising on sound quality and performance. The SM Series speakers are engineered with a sealed, perfectly-tuned enclosure to deliver quality audio reproduction that normally could not be achieved from the limitations of shallow mounting depths.
Available in two colors (black or white), the SM Series speakers are a stylish addition to your vessel with its clean aesthetics and unique shallow mount form factor.
Quality Audio Reproduction with Unique Shallow Mount Design
The SM Series speakers solves the age-old problem of achieving quality audio reproduction from the limitations of shallow mounting depths often required in many installations. By engineering a tuned, sealed enclosure into the back of the speaker, it eliminates the need to have sufficient volume behind the speaker for quality audio reproduction.
This makes the SM Series speakers capable of producing high-quality sound even with one of the most restrictive mounting depths of only 24mm [15/16"], allowing them to be installed in areas many other speakers will not fit, such as cabinets.
Versatile Mounting Solutions
The SM Series has two optional accessory mounting spacers to support installations in various positions.
IP65 Weatherproof
The SM Series speakers are designed for the harsh marine environment and are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection.
Features:
Shallow Basket Design - With a shallow mounting depth of only 24mm [15/16"], the SM Series speakers are ideal for installation where mounting depth is limited.
Tuned, Sealed Enclosure Design - Protects the speakers' components from damage and ensures quality audio reproduction is delivered that normally could not be achieved by a speaker with such a shallow design.
Retrofittable - The SM Series speakers have a circular back with a mounting diameter clearance of 130mm [5-1/8"], allowing it to fit easily into existing 6.5" speaker cutouts.
Aesthetic Interior Design - Designed with aesthetics in mind, the SM Series come with a high-end acoustic fabric grille and feature rounded edges and contour cues to add style to your vessel.
IP65 Weatherproof - The SM Series speakers are rated IP65 for protection against dust and water ingress in the harsh marine environment.
Specifications:
Cloth Grill cover
Speaker Enclosure Size: 155mm x 155mm [6-1/8" x 6-1/8"]
Peak Power: 100W
Driver Size: Tuned and optimized 3"
Efficiency (1W/1M): 84 dB
Frequency Response: 150 Hz - 20 kHz
Nominal Impedance: 4 Ohms
Cone/Surround Material: Polypropylene with rubber surround
Mounting Diameter Clearance: 130mm (5-1/8")
Mounting Depth Clearance: 24mm (15/16")
Operating Temperature Range: 0-50°C (32-122°F)
Storage Temperature Range: -20-70°C (-4-158°F)
Water and Dust Resistance (IPX rating): IP65
Warranty: 1 Year
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
107.99 |
|
|
12V Mini Twin Comapct Electric Horn
The Mini Twin Electric Horn has two totally sealed sound units with type 304 stainless steel covers, diaphragms and mounting bracket.
Features:
Dimensions: 3" L x 8" W x 1.75" H
Maximum amp draw: 6 amps, 12 volts
dB(A) rating: 109 at one meter
Fundamental frequency: 490 +/- 20; 430+/-20Hz
|
43.49 |
|
|
Mini Stainless Steel Dual Drop-In Horn with Stainless Steel Grills High & Low Pitch
Features:
All Stainless Steel Inside & Out
304 Stainless Steel inside and out including a sealed sound unit
No rust
Guaranteed for 5 years.
All meet ABYC A-23 for boats up to 12 meters
Pre-wired
It fits existing hole patterns
Specifications:
Lo Pitch: Dimensions: 3"L, 3-1/4"W, 1-3/4"H (7.5 x 8 x 4.5 cm)
Hi Pitch: Dimensions: 3"L, 3-1/4"W, 1-3/4"H (7.5 x 8 x 4.5 cm)
Max Amp Draw: 6 Amps.
Grill Dimensions: 4-7/8" x 2-3/8" with 4" hole centers.
Rating: 114 dB @ 1 Meter Installed
|
78.42 |
|
|
Mini Stainless Steel Single Drop-In Horn with Stainless Steel Grill - 12V Low Pitch
Features:
All Stainless Steel Inside & Out
304 Stainless Steel inside and out including a sealed sound unit
No rust
Guaranteed for 5 years
All meet ABYC A-23 for boats up to 12 meters
Pre-wired
It fits existing hole patterns
Specifications:
Dimensions: 3"L, 3-1/4"W, 1-3/4"H (7.5 x 8 x 4.5 cm)
Max Amp Draw: 3 Amps.
Grill Dimensions: 4-7/8" x 2-3/8" with 4" hole centers
Rating: 106 dB @ 1 Meter Installed
|
39.43 |
|
|
12V MiniBlast Compact Single Horn with Black Cover
The MiniBlast Compact Electric Horn features a long-lasting, non-corrosive ASA plastic cover and a sealed sound unit with stainless steel diaphragm.
Features:
Mounts in same hole pattern as the 10035 horn
Dimensions: 4.375" L x 3.375" W x 2" H
Maximum amp draw: 3 amps, 12 volt
dB(A) rating: 106 at one meter (3 feet)
Fundamental frequency: 430 +/- 20Hz
|
18.67 |
|
|
12V Compact Single Trumpet Electric Horn
The compact design of this trumpet horn makes it ideal for installation in smaller spaces.
Features:
100 percent stainless steel exterior
Type 304 stainless steel diaphragm
Dimensions: 14" L x 3.5" W x 4" H
Maximum amp draw: 3.5 amps
12 volt
dB(A) rating: 108 at one meter
Fundamental frequency: 420 +/- 20Hz
|
70.28 |
|
|
12V Compact Dual Trumpet Electric Horn
The compact eesign of this trumpet horn makes it ideal for installation in smaller spaces.
Features:
100 percent stainless steel exterior
Type 304 stainless steel diaphragm
Dimensions: 16" L x 7.5" W x 4" H
Maximum amp draw: 7 amps
12 volt
dB(A) rating: 110 at one meter
Fundamental frequency: 420 +/- 20, 370 +/- 20Hz
|
138.40 |
|
|
Mini Stainless Steel Single Drop-In Horn with Stainless Steel Grill - 12V High Pitch
Features:
High pitched
304 Stainless steel inside and out
5-year Guarantee
Prewired
Mounting holes have 4" centers
Hardware not included
3"L x 3-1/4"W x 1-1/2"H (7.5 x 8 x 4.5cm)
|
39.43 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
Surface Strip Light w/Switch - White LED - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
62.28 |
|