RAM Double Swing Arm with 8" Male Tele-Pole™, 9" Female Tele-Pole™ & 2.5" Round Base (AMPs Hole Pattern) Description The RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded female tele-pole. Included is a tele-pole with a height range from 11.5" to 17"; it can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray. The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12". Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball "C" Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Double Swing Arm with 4" Male and No Female Tele-Pole The RAM-VP-SW1-4, combination swing arm/tele-pole system, will connect to any RAM vehicle base with a welded female tele-pole, as well as RAM Framed Tough-Box Consoles. Included is a 4" tele-pole that can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray. The double swing arm mount includes a base & ball with pre-drilled holes, including the universal AMPS hole pattern; this accommodating most keyboards. The length of the double swing arm is 12". Material: Powder Coated Marine Grade Aluminum Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Double Swing Arm w/4" Male & No Female Tele-Pole Swing Arm connects to a 75mm x 75mm VESA Plate.

RAM Double Swing Arm w/4" Male and No Female Tele-Pole Swing Arm Connects to a Laptop Tray.

RAM Double Swing Arm with 8" Male and No Female Tele-Pole Material: Powder Coated Steel Color: Black Powder Coat

RAM Double Swing Arm w/8" Male & No Female Tele-Pole Swing Arm connects to No Ball Base. Material: Powder Coated Steel Color: Black Powder Coat

RAM Double Swing Arm w/8" Male and No Female Tele-Pole Swing Arm connects to 3.68" Diameter ball base.

Double Socket Arm with Two 2.5 Inch Round Bases The RAM-101-G2U consists of a double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both ends of the double socket arm. With a twist of the arm knob, you can move the RAM-101-G2U mount to your optimum viewing position. This mount is designed to hold the following devices: Garmin Fishfinder 120 Garmin Fishfinder 140 Garmin Fishfinder 250 Garmin Fishfinder 250c Garmin Fishfinder 340c Garmin Fishfinder 400c Garmin Fishfinder 80 Garmin Fishfinder 90 Garmin GPSMAP 172 Garmin GPSMAP 172c Garmin GPSMAP 178 Sounder Garmin GPSMAP 178c Sounder Garmin GPSMAP 292 Garmin GPSMAP 298 Sounder Garmin GPSMAP 420 Garmin GPSMAP 420s Garmin GPSMAP 421 Garmin GPSMAP 421s Garmin GPSMAP 430 Garmin GPSMAP 430s Garmin GPSMAP 431 Garmin GPSMAP 431s Garmin GPSMAP 440 Garmin GPSMAP 440s Garmin GPSMAP 441 Garmin GPSMAP 441s Garmin GPSMAP 450 Garmin GPSMAP 450s Garmin GPSMAP 520 Garmin GPSMAP 520s Garmin GPSMAP 521 Garmin GPSMAP 521s Garmin GPSMAP 525 Garmin GPSMAP 525s Garmin GPSMAP 526 Garmin GPSMAP 526s Garmin GPSMAP 530 Garmin GPSMAP 530s Garmin GPSMAP 531 Garmin GPSMAP 531s Garmin GPSMAP 535 Garmin GPSMAP 535s Garmin GPSMAP 536 Garmin GPSMAP 536s Garmin GPSMAP 540 Garmin GPSMAP 540s Garmin GPSMAP 541 Garmin GPSMAP 541s Garmin GPSMAP 545 Garmin GPSMAP 545s Garmin GPSMAP 546 Garmin GPSMAP 546s Garmin GPSMAP 550 Garmin GPSMAP 550s Garmin GPSMAP 555 Garmin GPSMAP 555s Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Single Socket Arm & 1/4" NPT Female Thread for 1" Balls The single socket for a B size 1_ ball that has a socket for Octagon Button products. This configuration gives you the ability to interface with the variety of Octagon Button bases, couplers and pipe mounts.

Horizontal Swing Arm Mount for Lowrance Elite-5 Series Horizontal Base Mount with Swing Arm C Size 1.5" Ball and Lowrance Mounting Base. Compatible Devices: Lowrance Elite-5 Series

RAM 1" Diameter Ball Double Socket Arm with Diamond Base Part #: RAM-B-103-238U The RAM-103-238U consists of a diamond base and double socket arm that will accept 1" ball bases. The diamond base measures 2.43" x 1.31" and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Double Socket Arm with Locking Knob for 1.5" Ball Bases The RAM-201LU, standard double socket arm with locking knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The locking knob, includes a brass 1/4"-20 thread; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it. Dimensions: Overall Length: 5.625" Socket-To-Socket Length: 4.5" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Double Socket Arm with Small Size Locking Knob for 1.5" Ball Bases The RAM-201U-BL, standard double socket arm with small size locking knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The locking knob, includes a brass 1/4"-20 thread; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it. Dimensions: Overall Length: 5.625" Socket-To-Socket Length: 4.5" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1" Diameter Ball Mount with 2/2.5" Round Bases & Mounting Hardware for Garmin Fishfinders & GPSMAP Devices The RAM-B-101-G2U consists of a double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the double socket arm. With a twist of the arm knob, you can move the RAM-B-101-G2U mount to your optimum viewing position. Color: Black Powder Coat Ball Size: 1 Inch Rubber Ball Material: Powder Coated Marine Grade Aluminum

RAM Double Socket Arm f/3-3/8" Ball Bases Part #: RAM-E-201U The RAM-E-201U double socket arm has a socket at both ends that accommodates 3.38" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. The socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 12.625" Socket to Socket Length: 9.875" Material: Powder Coated Marine Grade Aluminum Ball Size: 3.38" Rubber Ball E Size