|
5lb Mushroom Anchor
The YakGear 5-pound Mushroom Anchor is perfect for anchoring kayaks, canoes, stand-up paddleboards, and even jon boats in muddy, sandy, or weeded bottoms. The high-level holding strength provides additional security with a wide-area mushroom cap with drains in the base.
Shaped like an inverted mushroom, the head becomes buried in the soft seabed and will normally sink to the point where it has displaced its own weight in the seabed material. Its one-piece cast iron construction combined with a tough vinyl coating ensures long-lasting, dependable use. The anchor is very popular for fishermen and race buoys.
Features:
5 lb. inverted mushroom-shaped anchor
Cast iron and vinyl coated in black
1-year warranty
|
13.60 |
|
|
Anchoring & Docking
Are you heading out on the water? Make sure you have a great boat anchor onboard. Having an anchor on standby is the easiest way to ensure you are safe. If your engine dies, you need an anchor to hold you in place while making repairs. If you want to get out into the current, you need an anchor to keep you in place while fishing or swimming. We have the right anchor for your boat.
Your boat is not a bumper car. To protect your investment and keep your boat looking good, make sure you have boat fenders. When it comes to docking, the risk of rubbing or bumping increases unless you are prepared to prevent it Choose from our wide range of fenders and dock bumpers to ensure your boat is docked safely without a single scratch.
|
|
|
RAPTOR IS RELENTLESS
Raptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. It knows where you're anchoring, what's happening to your boat, and what to do next. It reads the bottom, senses the anchoring force and reacts automatically to keep you locked down until the moment you're ready to change spots. Legendary Minn Kota durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.
FIND THE RAPTOR FOR YOUR RIG
Raptor shallow water anchors install hydraulically and can anchor down to 8' or 10'. Match your boat with black, red, silver, and white models.
JUST THE RIGHT AMOUNT OF HOLD
Select Raptor models features Active Anchoring, This revolutionary anchoring technology continuously monitors anchoring force and adjusts to keep you pinned to the bottom.
Specials Closeouts Remanufactured Rebates
|
|
|
RAPTOR IS RELENTLESS
Raptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. It knows where you're anchoring, what's happening to your boat, and what to do next. It reads the bottom, senses the anchoring force and reacts automatically to keep you locked down until the moment you're ready to change spots. Legendary Minn Kota durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.
FIND THE RAPTOR FOR YOUR RIG
Raptor shallow water anchors install hydraulically and can anchor down to 8' or 10'. Match your boat with black, red, silver, and white models.
JUST THE RIGHT AMOUNT OF HOLD
Select Raptor models features Active Anchoring, This revolutionary anchoring technology continuously monitors anchoring force and adjusts to keep you pinned to the bottom.
Specials Closeouts Remanufactured Rebates
|
|
|
1.5lb Grapnel Anchor Kit with Storage Bag
Catch the big fish while anchored with the little anchor kit with the complete YakGear 1.5-pound Grapnel Anchor Kit. This 1.5-pound (.7 kg) galvanized steel anchor features four 3.5-inch tines that fold out of the way while stored for space maximization and release when ready for use. While it may seem small, a 1.5 lb. anchor is a more than adequate weight for kayaks and canoes in rivers, lakes, and slower-moving water. Includes 30 feet of 3/16-inch black nylon diamond braid anchor rope and a storage bag.
Features:
1.5 lb. galvanized steel Grapnel Anchor
Four folding 3.5 in. tines for easy storage
Locks in open or closed position
30 ft. nylon diamond braid rope
Storage bag included
1-year warranty
Note: It is recommended to use 3 times the depth of the water as the length of rope in calm waters and 4-5 times the depth of the water as the length of rope in choppy waters or windy conditions
|
20.00 |
|
|
3.3lb Grapnel Anchor Kit with Storage Bag
Anchor a kayak, canoe, or small boat worry-free with the YakGear 3.3-pound (1.5kg) Grapnel Anchor Kit. This 3.3-pound (1.5 kg) galvanized steel anchor features four 6-inch tines that fold out of the way while stored for space maximization and release when ready for use. The heavy head design of the anchor creates less wait time until the anchor is fully submerged into the anchoring surface in deeper and faster-moving water. 30 feet of 3/16-inch black nylon anchor rope and a storage ditty bag are included.
Features:
3.3 lb. galvanized steel Grapnel Anchor
Four folding 6" tines for easy storage
Locks in an open or closed position
A heavy head allows for easier anchoring
30 ft. nylon diamond braid rope
Storage bag included
1-year warranty
Note: It is recommended to use 3 times the depth of the water as the length of rope in calm waters and 4-5 times the depth of the water as the length of rope in choppy waters or windy conditions
|
22.40 |
|
|
Raptor 8' Shallow Water Anchor with Active Anchoring - Silver
Raptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. It knows where you’re anchoring, what’s happening to your boat, and what to do next. It reads the bottom, senses the anchoring force and reacts automatically to keep you locked down until the moment you’re ready to change spots. Legendary Minn Kota durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.
Features:
Active Anchoring: This revolutionary anchoring technology continuously monitors anchoring force and adjusts to keep you pinned to the bottom
Auto Bottom Mode: On Active Anchoring enabled models, this anchoring mode automatically senses bottom composition and hardness to deliver the right amount of anchoring force every time
Durable Design: A wider profile, heavy duty reinforced pivot points and extruded aluminum design will keep Raptor on the water in the harshest conditions
Retraction Force: We designed Raptor with increased retraction force to ensure spike removal in all bottom types.
Multiple Control Options: Control Raptor from anywhere on the boat using your choice of options: Wireless Remote, Foot Switch, i-Pilot or i-Pilot Link Remote, Mobile App or right from the Humminbird fish finder.
User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), standard (normal anchoring), and Auto-Bottom Mode on Active Anchoring equipped models which automatically delivers the ideal anchoring force by sensing bottom hardness
Indestructible Anchoring Spike: Strong and flexible composite anchor spike backed with a lifetime guarantee
Auto Up/Down: Automatically deploy or retract your Raptor with the push of a button; no need to hold the button down
Saltwater-Tough Engineering: Keeps Raptor safe from the corrosive effects of saltwater
Specifications:
Product Weight 38 lb
Anchoring Depth 8 ft
Product Dimensions 15.5 in x 4.75 in x 58 in
Operation Hydraulic
Active Anchoring
Deployment Four-Bar Articulating Arm
Auto Up/Down
Wireless Remote
15' Hydraulic hoses
|
2159.99 |
|
|
Raptor 10' Shallow Water Anchor with Active Anchoring - Red
Raptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. It knows where you’re anchoring, what’s happening to your boat, and what to do next. It reads the bottom, senses the anchoring force and reacts automatically to keep you locked down until the moment you’re ready to change spots. Legendary Minn Kota durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.
Features:
Active Anchoring: This revolutionary anchoring technology continuously monitors anchoring force and adjusts to keep you pinned to the bottom
Auto Bottom Mode: On Active Anchoring enabled models, this anchoring mode automatically senses bottom composition and hardness to deliver the right amount of anchoring force every time
Durable Design: A wider profile, heavy duty reinforced pivot points and extruded aluminum design will keep Raptor on the water in the harshest conditions
Retraction Force: We designed Raptor with increased retraction force to ensure spike removal in all bottom types.
Multiple Control Options: Control Raptor from anywhere on the boat using your choice of options: Wireless Remote, Foot Switch, i-Pilot or i-Pilot Link Remote, Mobile App or right from the Humminbird fish finder.
User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), standard (normal anchoring), and Auto-Bottom Mode on Active Anchoring equipped models which automatically delivers the ideal anchoring force by sensing bottom hardness
Indestructible Anchoring Spike: Strong and flexible composite anchor spike backed with a lifetime guarantee
Auto Up/Down: Automatically deploy or retract your Raptor with the push of a button; no need to hold the button down
Saltwater-Tough Engineering: Keeps Raptor safe from the corrosive effects of saltwater
Specifications:
Product Weight 44 lb
Anchoring Depth 10 ft
Product Dimensions 15.5 in x 4.75 in x 70 in
Operation Hydraulic
Active Anchoring
Deployment Four-Bar Articulating Arm
Auto Up/Down
Wireless Remote
15' Hydraulic hoses
|
2399.99 |
|
|
Molded Stick Clip Kit - 3/4" Clips
Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. the 3/4 in. clip will fit paddles from 5/8 inch to 7/8 inch and is YakGear’s preferred method of securing the YakGear - Yakstick Mud Anchor.
This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Molded rubber paddle clips allow for easy paddle or mud anchor storage
Two solid rubber-molded paddle clips are provided
3/4 in. clips fit paddles and mud anchors ranging from 5/8 to 7/8 in.
Installation instructions and hardware are included
1-year warranty
Specifications:
Size: 3/4 in. clips
|
8.00 |
|
|
Raptor 8' Shallow Water Anchor - Black
Raptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. Designed with increased retraction force, Raptor’s spike pulls free from mud, sand and rock every time. Legendary Minn Kota durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.
Features:
Durable Design: A wider profile, heavy duty reinforced pivot points and extruded aluminum design will keep Raptor on the water in the harshest conditions
Retraction Force: We designed Raptor with increased retraction force to ensure spike removal in all bottom conditions.
Multiple Control Options: Control Raptor from anywhere on the boat using your choice of options: Wireless Remote, Foot Switch, i-Pilot or i-Pilot Link Remote, Mobile App or right from the Humminbird fish finder.
User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), standard (normal anchoring), and Auto-Bottom Mode on Active Anchoring equipped models which automatically delivers the ideal anchoring force by sensing bottom hardness
Indestructible Anchoring Spike: Strong and flexible composite anchor spike backed with a lifetime guarantee
Auto Up/Down: Automatically deploy or retract your Raptor with the push of a button; no need to hold the button down
Saltwater-Tough Engineering: Keeps Raptor safe from the corrosive effects of saltwater
Specifications:
Product Weight 38 lb
Anchoring Depth 8 ft
Product Dimensions 15.5 in x 4.75 in x 58 in
Operation Hydraulic
Deployment Four-Bar Articulating Arm
Auto Up/Down
Wireless Remote
15' Hydraulic hoses
|
1919.99 |
|
|
Raptor 8' Shallow Water Anchor - Silver
Raptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. Designed with increased retraction force, Raptor’s spike pulls free from mud, sand and rock every time. Legendary Minn Kota durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.
Features:
Durable Design: A wider profile, heavy duty reinforced pivot points and extruded aluminum design will keep Raptor on the water in the harshest conditions
Retraction Force: We designed Raptor with increased retraction force to ensure spike removal in all bottom conditions.
Multiple Control Options: Control Raptor from anywhere on the boat using your choice of options: Wireless Remote, Foot Switch, i-Pilot or i-Pilot Link Remote, Mobile App or right from the Humminbird fish finder.
User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), standard (normal anchoring), and Auto-Bottom Mode on Active Anchoring equipped models which automatically delivers the ideal anchoring force by sensing bottom hardness
Indestructible Anchoring Spike: Strong and flexible composite anchor spike backed with a lifetime guarantee
Auto Up/Down: Automatically deploy or retract your Raptor with the push of a button; no need to hold the button down
Saltwater-Tough Engineering: Keeps Raptor safe from the corrosive effects of saltwater
Specifications:
Product Weight 38 lb
Anchoring Depth 8 ft
Product Dimensions 15.5 in x 4.75 in x 58 in
Operation Hydraulic
Deployment Four-Bar Articulating Arm
Auto Up/Down
Wireless Remote
15' Hydraulic hoses
|
1919.99 |
|
|
Anchor Cleat Kit
The YakGear Anchor Cleat Kit comes with a 4-inch nylon anchor cleat for kayaks, canoes, and small boats. This anchor cleat provides a stable access point to secure anchors, drift chutes, bow lines, and safety lines.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Installation instructions and hardware are included
1-year warranty
Specifications:
Length: 4 inches
|
5.60 |
|
|
Guardian G-5 Anchor - 2.5lb
Guardian anchors benefit from years of Fortress research and development, offering excellent quality, performance, and economy. These anchors are manufactured from the same corrosion-resistant, high-tensile aluminum magnesium alloy as Fortress, which makes them stronger and lighter than competitive steel anchors.
With Guardian anchors, several Fortress machining steps and extra features, such as anodizing and adjustable fluke angles, are eliminated. The Guardian Anchor is limited to one, single, 32-degree angle, which will work for most common sea bottoms. The result is a high-performance anchor that is engineered for fast setting and strong holding power, and a very affordable alternative to those heavy, rust-prone steel anchors.
As strong as steel, but only half the weight, Guardian anchors are second only to Fortress FX model in holding power tests. They make an excellent spare or storm anchor for your boat or yacht.
*Made in the U.S.A.
Features:
Fortress high-tech aluminum alloy
Rust-proof and non-magnetic materials
Easily assembles and disassembles for convenient storage
No failing welded pieces
Easy to manage weight
Replaceable parts
Technical Specifications:
Size of Boat - 12' to 16' (4 to 5 M)
Style - Fluke
Material - Aluminum magnesium alloy
Working Load - 350lbs (159kg)
Shank Length - 19" (483mm)
Fluke Length - 11" (279mm)
Stock Length - 16" (406mm)
Weight - 2.5lbs (1.1kg)
*Sold as an Individual
|
52.31 |
|
|
Guardian G-11 Anchor - 5LB
Guardian anchors benefit from years of Fortress research and development, offering excellent quality, performance, and economy. These anchors are manufactured from the same corrosion-resistant, high-tensile aluminum magnesium alloy as Fortress, which makes them stronger and lighter than competitive steel anchors.
With Guardian anchors, several Fortress machining steps and extra features, such as anodizing and adjustable fluke angles, are eliminated. The Guardian Anchor is limited to one, single, 32-degree angle, which will work for most common sea bottoms. The result is a high-performance anchor that is engineered for fast setting and strong holding power, and a very affordable alternative to those heavy, rust-prone steel anchors.
As strong as steel, but only half the weight, Guardian anchors are second only to Fortress FX model in holding power tests. They make an excellent spare or storm anchor for your boat or yacht.
*Made in the U.S.A.
Features:
Fortress high-tech aluminum alloy
Rust-proof and non-magnetic materials
Easily assembles and disassembles for convenient storage
No failing welded pieces
Easy to manage weight
Replaceable parts
Technical Specifications:
Size of Boat - 23' to 27' (7 to 8 M)
Style - Fluke
Material - Aluminum magnesium alloy
Working Load - 750lbs (340kg)
Shank Length - 25" (635mm)
Fluke Length - 15" (381mm)
Stock Length - 20" (508mm)
Weight - 5lbs (2.26kg)
*Sold as an Individual
|
92.12 |
|
|
FX-11 Complete Anchoring System
Whether used as a primary anchor or conveniently-stowed backup, Fortress Marine Anchors are well-known for their exceptional holding capability.
This Complete Anchoring Systems has it all. Two large, precision-machined and sharpened flukes ensure that Fortress anchors set fast and dig deep. Unlike others, they’re easily adjusted from a 32° angle for use in sand and clay to 45° for soft mud. Unique Mud Palms are included to optimize setting performance in problem soft bottoms.
Also included is 15′ of 1/4″ G-30 chain that is spliced to 250′ of shock- absorbing 3/8″ three-strand nylon rope and a 1/4″ shackle.
*For boats up to 32' (10 M)
*Made in the U.S.A.
In the box:
Fortress FX-11 anchor
1/4" Shackle
15' of G-30 1/4" Chain
250' of 3/8" three-strand nylon rope
Safe anchoring guide
*Sold as an Individual
|
384.50 |
|